Question Black Screen when trying to boot, new hardware released ?

Discussion in 'Switch - Exploits, Custom Firmwares & Soft Mods' started by Picooz, Jul 10, 2018.

  1. Picooz
    OP

    Picooz Member

    Newcomer
    1
    Jul 10, 2018
    Japan
    Hey guys, I bought (on 7/7/2018 in Japan) a nintendo switch. I try to boot the payload.bin from sx os, but nothing happens at all (using TegraRcmSmash). Every time i try, i get stuck on a black screen.

    - boot.dat on my sd card (formated with the nintendo switch)
    - i'm getting into RMC without any issues
    - i'm using a c2c usb cable (laptopt => switch)

    Uploading payload (mezzo size: 92, user size: 97228, total size: 163444, total padded size: 163840)...
    Switched to high buffer
    Smashing the stack!
    Smashed the stack with a 0x0000 byte SETUP request!

    I'm starting to think that a new switch harware has been released. I would like to prove this point or understand if im doing something wrong
    I dont know if "Smashed the stack with a 0x0000 byte SETUP request!" must be considered as an error ?

    Thank you in advance for your help :)

    As english is not my mother tongue, please excuse any errors on my part
     
  2. Milenko

    Milenko GBAtemp Advanced Maniac

    Member
    10
    Oct 16, 2017
    Australia
    Have you tried a different payload?
     
  3. Ricken

    Ricken Love thy martyr, Fear thy mother

    Member
    8
    Jan 19, 2016
    United States
    Shibuya, The small one from Vegas
    May I ask what version you're on?
     
    Draxzelex likes this.
  4. snoofly

    snoofly GBAtemp Advanced Fan

    Member
    7
    Aug 18, 2015
    United Kingdom
    interesting, 0x0000 bytes?
    what is the serial number of the switch?
     
  5. Draxzelex

    Draxzelex GBAtemp Guru

    Member
    18
    Aug 6, 2017
    United States
    New York City
    This. If it didn't come with firmware 5.0 or higher, then it is not a new Switch revision.
     
    Erol and Ricken like this.
  6. Picooz
    OP

    Picooz Member

    Newcomer
    1
    Jul 10, 2018
    Japan
    I'm on the lastest version (5.1) and yes, I have tried different payload. My nintendo switch came up with 4.1 (if I rembember correctly)
     
    Last edited by Picooz, Jul 10, 2018
  7. monkeyman4412

    monkeyman4412 Gbatemp's moronic trash

    Member
    7
    Jun 16, 2016
    United States
    Darn, I can't come up with something edgy
    did you install the proper drivers? And if so, what commands are you using with tegrarcmsmash.

    — Posts automatically merged - Please don't double post! —

    Hold on.
    "RCM Device with id C082040900000004C475296401101062 initialized successfully!
    Uploading payload (mezzo size: 92, user size: 27748, total size: 93964, total padded size: 94208)...
    Smashing the stack!
    Smashed the stack with a 0x7000 byte SETUP request!" <----- my out put.
    And this is me using a tx payload... all the sizes are all wrong.
    his (mezzo size: 92, user size: 97228, total size: 163444, total padded size: 163840)
    mine (mezzo size: 92, user size: 27748, total size: 93964, total padded size: 94208)
    And his talked about high buffers... has anyone gotten a high buffer?
     
    Last edited by monkeyman4412, Jul 10, 2018
  8. Picooz
    OP

    Picooz Member

    Newcomer
    1
    Jul 10, 2018
    Japan
    Yes the drivers are properly installed (I have checked with Zadig)

    I tried with TegraRcmGUI and TegraRcmSmash command line (TegraRcmSmash.exe payload.bin)
     
  9. monkeyman4412

    monkeyman4412 Gbatemp's moronic trash

    Member
    7
    Jun 16, 2016
    United States
    Darn, I can't come up with something edgy
    operating system? and your not using a vm are you?
     
  10. Cava

    Cava GBAtemp Advanced Fan

    Member
    6
    Jan 26, 2016
    Hungary
    You can't get into RCM mode with a new revision so the problem is something else.
     
    Subtle Demise likes this.
  11. monkeyman4412

    monkeyman4412 Gbatemp's moronic trash

    Member
    7
    Jun 16, 2016
    United States
    Darn, I can't come up with something edgy
    Wrong, they could leave rcm mode, but patch the bug that allowed ACE in the first place in rcm mode. Who said they would have to completely remove it in the first place?
     
    Last edited by monkeyman4412, Jul 10, 2018
    Cava and Draxzelex like this.
  12. Picooz
    OP

    Picooz Member

    Newcomer
    1
    Jul 10, 2018
    Japan
    W10 and im not using a VM. I tried on 2 different laptop with 2 different cable (c2c usb cable & a2c usb cable)
     
  13. monkeyman4412

    monkeyman4412 Gbatemp's moronic trash

    Member
    7
    Jun 16, 2016
    United States
    Darn, I can't come up with something edgy
    I'm clueless then. Can you take a picture of your switch's back?
     
  14. Unleanone999

    Unleanone999 GBAtemp Advanced Fan

    Member
    6
    May 15, 2018
    Togo
    Congrats! You got one of the mariko units.
     
  15. SirNapkin1334

    SirNapkin1334 Renound Aritst

    Member
    6
    Aug 20, 2017
    United States
    Crap Mountain
    Look on the back. There’s a product code, near the Switch logo (I think underneath). It should say HAC-001. Does it say that?
     
    juanrosalesr2 and Uumas like this.
  16. mohalz

    mohalz Advanced Member

    Newcomer
    1
    Jul 10, 2018
    Saudi Arabia
    same thing happened to me all i did is trying a different launcher and it worked
     
  17. Erol

    Erol GBAtemp Fan

    Member
    6
    May 13, 2009
    Gambia, The
    Does the SX Pro work?
     
  18. Picooz
    OP

    Picooz Member

    Newcomer
    1
    Jul 10, 2018
    Japan
    Yes its written HAC-001, that's why i think it's not a mariko one

    — Posts automatically merged - Please don't double post! —

    I tried to use NX LOADER but the app doesnt say anything when i plug in my switch. (Galaxy S7E, using micro-usb -> usb-a & usb-a => usb-c)
     
  19. mohalz

    mohalz Advanced Member

    Newcomer
    1
    Jul 10, 2018
    Saudi Arabia
    if you don't hear any sound when you plug your switch to your pc than it means its a driver issue
     
    lieder1987 likes this.
  20. Picooz
    OP

    Picooz Member

    Newcomer
    1
    Jul 10, 2018
    Japan
    Everything is working fine on my pc, i can hear the "windows device plug in sound" when the switch is into RCM and the switch is listed in the device manager as "libusbK USB Devices" - "APX"
     
Loading...