Hacking An Error Has Occurred problem

[Quantumcat]

Yes, no booting of any files I have flashcard compatible and the magnet and the files in SD memory all good when i turn on the 3ds (power+X+start+select) nothing happens seconds and the message error comeback

Is the flashcart definitely flashed correctly?
With the buttons, hold down Start, Select, X BEFORE you press power, then press power brielfy so the light comes on, then wait a few seconds before letting go of Start, Select and X.

 

[Abdelatif]

Is the flashcart definitely flashed correctly?
With the buttons, hold down Start, Select, X BEFORE you press power, then press power brielfy so the light comes on, then wait a few seconds before letting go of Start, Select and X.

Yes i know all of this, the flashcard TTDS is ok, like i said before I flashed over 10 console with it no problem at all

--------------------- MERGED ---------------------------

Can you answer me on this question ;
with a flashcard compatible ntrboot and the right files on the micro SD and the magnet of course we be able to boot the files on SD memory (godmode/decrypt/safeb9sinstaller...any one) in any kind bricken 3ds (black/blue screen /MCUbrick...any brick exist) ?
i don't mean fix the brick but just boot up the file ?

 

[Quantumcat]

Yes i know all of this, the flashcard TTDS is ok, like i said before I flashed over 10 console with it no problem at all

--------------------- MERGED ---------------------------

Can you answer me on this question ;
with a flashcard compatible ntrboot and the right files on the micro SD and the magnet of course we be able to boot the files on SD memory (godmode/decrypt/safeb9sinstaller...any one) in any kind bricken 3ds (black/blue screen /MCUbrick...any brick exist) ?
i don't mean fix the brick but just boot up the file ?

Yes it should work. I've not heard of any console not working with ntrboot, my guess is the SD reader in the console doesn't work. If this is the case there's really nothing you can do, even if you installed B9S with a hardmod it wouldn't be able to use boot.firm on the SD card to start up. And if it isn't the SD reader then replacing it would be a waste of time and money. Maybe the cartridge reader is broken or maybe one of the Start, Select, or X buttons is broken.

So to summarise, if there's a chance you've just put the magnet in the wrong place or pressing the buttons wrong keep trying, or if you're convinced you're doing everything correctly, then it might be time to give up on this console.

 

[Xathya]

its ok my dude!!

 

[Abdelatif]

Yes it should work. I've not heard of any console not working with ntrboot, my guess is the SD reader in the console doesn't work. If this is the case there's really nothing you can do, even if you installed B9S with a hardmod it wouldn't be able to use boot.firm on the SD card to start up. And if it isn't the SD reader then replacing it would be a waste of time and money. Maybe the cartridge reader is broken or maybe one of the Start, Select, or X buttons is broken.

i don't think the sd reader is broken because he do the downgrade with it, and for the cartridge works too he told me that + i try the combination magnet and buttons oven then 50 times always the same thing.

i was thinking how about i install a new NAND from an author 3ds system with the hardmod i know it won't fix the problem but i will get a new brick, how i can try the ntrboot on it ? song crazy xD but i don't have any other ideas

--------------------- MERGED ---------------------------

its ok my dude!!

what do you mean

 

[Quantumcat]

i don't think the sd reader is broken because he do the downgrade with it, and for the cartridge works too he told me that + i try the combination magnet and buttons oven then 50 times always the same thing.

i was thinking how about i install a new NAND from an author 3ds system with the hardmod i know it won't fix the problem but i will get a new brick, how i can try the ntrboot on it ? song crazy xD but i don't have any other ideas

--------------------- MERGED ---------------------------


what do you mean

A hardmod wouldn't do anything different to ntrboot - it would just let you install b9s so you'd be able to boot payloads from the SD and unbrick.

 

[Abdelatif]

ok so it's dead dmg,
thank you man for your answers

 

[Justin20020]

did you spot the sensor of the sleepmode with your magnet perfectly? Maybe you missed the spot of it

 

[Abdelatif]

when i turn on the 3ds and the error message show up i put the magnet and i see exactly where the sensor is ,so i don't think i misstep

--------------------- MERGED ---------------------------

what's the purpose ofthis file(ntrboot) on the godmode9 files ?

 

[MrMcTiller]

Yes, no booting of any files I have flashcard compatible and the magnet and the files in SD memory all good when i turn on the 3ds (power+X+start+select) nothing happens seconds and the message error comeback

Do you have a DS, DSi, DS Lite, OR another 3ds? Try to flash NTRBoot with one of the other systems. Follow these guides depending on which system you have:

If you have another 3ds

If you have a DSi

If you have a DS

Once you follow the guide, insert your Flashcart and try to use a stronger magnet and hold Start+Select+X+Power. Hold it for a few seconds. That should work.

 

[MrMcTiller]

Yes, no booting of any files I have flashcard compatible and the magnet and the files in SD memory all good when i turn on the 3ds (power+X+start+select) nothing happens seconds and the message error comeback

Normally when the error comes back, the system is not in sleep mode with the buttons pressed down try a stronger magnet and try to have someone hold the magnet while you press the Start+Select+X+Power buttons.

 

[Abdelatif]

Do you have a DS, DSi, DS Lite, OR another 3ds? Try to flash NTRBoot with one of the other systems. Follow these guides depending on which system you have:

If you have another 3ds
If you have a DSi
If you have a DS

Once you follow the guide, insert your Flashcart and try to use a stronger magnet and hold Start+Select+X+Power. Hold it for a few seconds. That should work.

yes, i have 2ds system but sorry i won't mess up with the flashcard because i flash with here over then 10 consoles (o3ds/o3dsxl/2ds even n3dsxl too) so i sure 100% it's not the flashcard the problem.
the magnet is strong/ big and i know where the sensor is, even i try with a friend like you said

other thing i have done the hardmod successfully but now i stuck; i can't read the NAND in the PC ( i don't have compatible reader card SD )
i try over then 5 readers no one wont work,i search on my area on the compatible one but nothing ...
am disgusted

 

[MrMcTiller]

yes, i have 2ds system but sorry i won't mess up with the flashcard because i flash with here over then 10 consoles (o3ds/o3dsxl/2ds even n3dsxl too) so i sure 100% it's not the flashcard the problem.
the magnet is strong/ big and i know where the sensor is, even i try with a friend like you said

other thing i have done the hardmod successfully but now i stuck; i can't read the NAND in the PC ( i don't have compatible reader card SD )
i try over then 5 readers no one wont work,i search on my area on the compatible one but nothing ...
am disgusted

As long as you did the hardmod right, it should work. If it doesn't work, you might have fried the NAND. I don't know much about hardmods, so I can't help.

 

[Abdelatif]

I don't think i fried the nand or something is just questions of card reader
Thank you for all

 

[MrMcTiller]

I don't think i fried the nand or something is just questions of card reader
Thank you for all

Wait, so you can't boot Luma Config menu? (Hold select on boot). If it boots, try to boot SafeBoot9Strap installer (.firm)

--------------------- MERGED ---------------------------

I don't think i fried the nand or something is just questions of card reader
Thank you for all

My 3ds had this kind of brick. I tried to boot and it showed the home screen for about 3 seconds, then Crashed. It would boot Luma Config menu and it had some corrupted characters (some of the text was in hex code). Every once in awhile it would tell me that the CTR NAND firm was corrupted. I fixed this by using a R4i GOLD 3DS RTS and installing B9S. I had a backup and it didn't work. I had to do a CTRTransfer to 9.2.0 and it worked. I updated and it has worked ever since.

 

[Abdelatif]

Wait, so you can't boot Luma Config menu? (Hold select on boot). If it boots, try to boot SafeBoot9Strap installer (.firm)

--------------------- MERGED ---------------------------


My 3ds had this kind of brick. I tried to boot and it showed the home screen for about 3 seconds, then Crashed. It would boot Luma Config menu and it had some corrupted characters (some of the text was in hex code). Every once in awhile it would tell me that the CTR NAND firm was corrupted. I fixed this by using a R4i GOLD 3DS RTS and installing B9S. I had a backup and it didn't work. I had to do a CTRTransfer to 9.2.0 and it worked. I updated and it has worked ever since.

This won't help me, this piece of shit won't boot nothing the only thing how can save me is hardmod

 

[MrMcTiller]

This won't help me, this piece of shit won't boot nothing the only thing how can save me is hardmod

Well then, Good Luck