Hacking Acekard 2i Help

[BigG]

Ok, chances are this has been answerd millions of times before, but i have been searching for the answer for about 30 mins and can't find it. So please, help.

I had an AK2i and DSi working fine 'till it got stolen when we went to America. So i recently bought a new DSi and new Acekard 2i with 4gb Micro SD. I updated the DSi to 1.4 before i got the AK and now i try to use the Acekard and it won't even load. It says "An error has occured press and hold power button... refer to DSi manual etc etc." when i touch the Acekard icon to play it.

I have an old DS lite if this helps.

Thanks a lot.

 

[antonkan]

If you have an Nintendo DS Lite, update your Acekard 2i using the DSi firmware 1.4 fix. Download here

Just use your Nintendo DS Lite and follow the instructions (quoted from another topic):

Instructions: Unzip the two files anywhere into your MicroSD. Keep in mind that the requirements is a console that can boot the AceKard 2i, with that in mind, turn it on, and go straight to the AceKard menu as you usually do. Then navigate to either of the two files (one of the viewing modes does not allow for you to read the text, so you can click Select to view it). If you want to update a single cart, use the ak2ifw_update_14_DSi.nds file. Read through the warnings, and click Start and just wait until the update is done, reboot and you’re set. If you want to run the update on several carts, boot ak2ifw_update_14_DSL.nds, and you will follow the instructions just as before, but be prompted to insert the next AceKard 2i, and the next one and the one after that.

QUOTEInstructions are within the program which read:
For ak2ifw_update_14_DSi.nds


AK2i FIRMWARE UPDATE(14)

CHIP ID:0fc2 HW:8181

This program may damage your acekard 2i cartridge(it has a very small chance) , you should know what you are doing before continue.

Are you sure you want to continue?

(Press START) OK, I’ll do it
(Press any other keys) CANCEL

For ak2ifw_update_14_DSL.nds


Before update, please eject the card and insert it again.

press B to continue.

After the Acekard 2i update, take out your Acekard 2i to your Nintendo DSi, navigate to the Danny Phatom icon, and that's it. You're done.

 

[BigG]

If you have an Nintendo DS Lite, update your Acekard 2i using the DSi firmware 1.4 fix. Download here

Just use your Nintendo DS Lite and follow the instructions (quoted from another topic):

Instructions: Unzip the two files anywhere into your MicroSD. Keep in mind that the requirements is a console that can boot the AceKard 2i, with that in mind, turn it on, and go straight to the AceKard menu as you usually do. Then navigate to either of the two files (one of the viewing modes does not allow for you to read the text, so you can click Select to view it). If you want to update a single cart, use the ak2ifw_update_14_DSi.nds file. Read through the warnings, and click Start and just wait until the update is done, reboot and you’re set. If you want to run the update on several carts, boot ak2ifw_update_14_DSL.nds, and you will follow the instructions just as before, but be prompted to insert the next AceKard 2i, and the next one and the one after that.

QUOTEInstructions are within the program which read:
For ak2ifw_update_14_DSi.nds


AK2i FIRMWARE UPDATE(14)

CHIP ID:0fc2 HW:8181

This program may damage your acekard 2i cartridge(it has a very small chance) , you should know what you are doing before continue.

Are you sure you want to continue?

(Press START) OK, I’ll do it
(Press any other keys) CANCEL

For ak2ifw_update_14_DSL.nds


Before update, please eject the card and insert it again.

press B to continue.

After the Acekard 2i update, take out your Acekard 2i to your Nintendo DSi, navigate to the Danny Phatom icon, and that's it. You're done.

The amount of people that love you has increased by one

 

[redact]

off topic:
why bottom?
why not young ones? :'(

 

[4th'ave']

do i need to use DS lite to update my AK2i?? thanks

 

[elixirdream]

you can use DSL, DSPHAT and DSi which is not 1.4 to update your ak2i