Hacking 6.1.0 ChoiDujour Switch is Dead ???

[satel]

I dont know...

Does it have BIS key in it? Crypto & Tweak?

i can't see BIS but it looks like this

secure_boot_key =
tsec_key =
keyblob_mac_key_source =
keyblob_key_source_00 =
master_key_source =
keyblob_key_source_01 =
keyblob_key_source_02 =
keyblob_key_source_03 =
keyblob_key_source_04 =
keyblob_key_source_05 =
keyblob_key_00 =
keyblob_key_01 =
keyblob_key_02 =
keyblob_key_03 =
keyblob_key_04 =
keyblob_key_05 =
keyblob_mac_key_00 =
keyblob_mac_key_02 =
keyblob_mac_key_03 =
keyblob_mac_key_04 =
keyblob_mac_key_05 =
keyblob_00 =
keyblob_01 =
keyblob_02 =
keyblob_03 =
keyblob_04 =
keyblob_05 =
master_key_00 =
master_key_01 =
master_key_02 =
master_key_03 =
master_key_04 =
master_key_05 =
package1_key_00 =
package1_key_01 =
package1_key_02 =
package1_key_03 =
package1_key_04 =
package1_key_05 =
package2_key_source =
aes_kek_generation_source =
titlekek_source =
package2_key_00 =

 

[Trice]

Nope, that's not it. The biskeys file has a bunch of crypt/tweak key pairs in it. The one you posted is just the regular keys.txt file. I don't think you can get the biskeys directly through Hekate, you need to use the payload mattytrog linked to.

 

[Frexxos]

Hellou Sir same issue here... and here is my solution (till now I dont know why I have this problem)

after i uesed ChoiDujour Switch for updating to 6.0.1 I have the same issue like you. It wont boot. When i put my dongle in - nothing happening. just wont turn un.

Also I did the following:

1. Turn your switch totally of - by holding the power button for like 20 seconds
2. put your jig in - go into rcm mode vol+ & power button
3. put in jig or your payload
4. switch will boot now

If I try to restart my switch - wont work except I use my described method... If the switch powers off - same situation.
I learned to live with that.

tell me if it helped

 

[satel]

Nope, that's not it. The biskeys file has a bunch of crypt/tweak key pairs in it. The one you posted is just the regular keys.txt file. I don't think you can get the biskeys directly through Hekate, you need to use the payload mattytrog linked to.

ok thanks

--------------------- MERGED ---------------------------

Hellou Sir same issue here... and here is my solution (till now I dont know why I have this problem)

after i uesed ChoiDujour Switch for updating to 6.0.1 I have the same issue like you. It wont boot. When i put my dongle in - nothing happening. just wont turn un.

Also I did the following:

1. Turn your switch totally of - by holding the power button for like 20 seconds
2. put your jig in - go into rcm mode vol+ & power button
3. put in jig or your payload
4. switch will boot now

If I try to restart my switch - wont work except I use my described method... If the switch powers off - same situation.
I learned to live with that.

tell me if it helped

this is exactly what i did & i will be disabling AutoRCM so Switch can boot up normally without relying on any payload

 

[Trice]

You're aware that it will burn the fuses that way though, right?

 

[mdmachine]

AutoRCM is enabled so you dont burn your fuses. If you disable that, it will burn them, at that point you might of well just updated officially. And you have no hope of ever going back to a earlier firmware. Just have a dongle handy for the times you need to boot and inject a payload. I use a RaberryPI.

 

[satel]

AutoRCM is enabled so you dont burn your fuses. If you disable that, it will burn them, at that point you might of well just updated officially. And you have no hope of ever going back to a earlier firmware. Just have a dongle handy for the times you need to boot and inject a payload. I use a RaberryPI.

i see so AutoRCM is a must have & if disabled fuses will still burn !! i didn't know that but now i know. thanks for explaining

 

[nmkd]

I had the same problem, restored my NAND backup.

So, is there any fix for this yet?

 

[Clutchman]

I have auto rcm enabled through sx os. Should I disable it before I update using ChoiDujour since it turns it on automatically?

 

[mattytrog]

I have auto rcm enabled through sx os. Should I disable it before I update using ChoiDujour since it turns it on automatically?

No need mate.

 

[satel]

i noticed after updating using Choidujour my apps no longer showing up when i click on ALBUM ? any idea why ?

 

[Joaoaug]

i noticed after updating using Choidujour my apps no longer showing up when i click on ALBUM ? any idea why ?

While on CFW or OFW?

 

[satel]

While on CFW or OFW?

while on CFW but i fixed it now, the funny thing is when i update the latest SDfiles like everyone else recommended this happened so i went back to the original files i had & everything is back to normal. thanks for asking