This tutorial uses TegraRCM command line to send payloads to RCM enabled Switch.
Command line is used since it offers a more detailed explanation on what is going on.
So it is a definitive way to confirm if your Switch is patched or not without further questions.
This tutorial does not make any modification to your Switch console.

Requirement:
No Micro SD Card is required.
1. Any way of entering Recovery Mode. Please read here, https://gbatemp.net/threads/the-ultimate-list-of-mods-to-enter-rcm.502145/
2. biskeydump.bin payload(please get the latest version, as of 30th July 2019, the latest version is V9), can be downloaded from https://switchtools.sshnuke.net/
3. TegraRcm GUI, can be downloaded from https://github.com/eliboa/TegraRcmGUI/releases
4. USB C to USB A cable
5. A PC with USB port (Sorry I don't have Mac so I could not cover this area)

Step-by-Step (in total 7 steps):
1. put in your RCM Jig on the right joy con rail. Press and hold Vol+ then press the power button.
You should see a black/blank screen after you press the power button.
If you see a Nintendo logo, you can power off your console and try to adjust your RCM Jig position.

2. To install APX driver
2.1 Launch TegraRcm GUI, go to Settings tab, click on "Install Driver" button.


Confirm the driver installation.


2.2 For those having problems installing APX driver :
Install and launch Zadig. Plug your Switch in RCM mode, then select Options > List All Devices.
Select the APX device and check which driver is installed for this specific device. If libusbK is not the current driver, install it.

(This step is copied from https://gbatemp.net/threads/tegrarcmgui-simple-gui-for-tegrarcmsmash.503510/)

3. Plug in USB cable from your PC to Switch(in RCM).
Open TegraRcm GUI and you should see this window with "RCM OK".


Alternatively, you can use Device Manager to confirm if the APX device is recognized.


Now you can close the TegraRcm GUI application.

4. Copy biskeydump.bin to the TegraRcm GUI folder.


5. Open a command line and go to the TegraRcm GUI folder.


6. Run this on the command line

TegraRcmSmash.exe -w biskeydump.bin BOOT:0x0

7. Check the result
7.1 Switch accepts and executes payload, which mean your Switch is not patched.
Please refer to 0X7000


You will also see QR code on your Switch screen.

7.2 Switch accepts but does not executes payload, which means your Switch is patched.
Please refer to 0X0000

 

[Draxzelex]

This is also the cheapest way of doing it.

On another note, considering that you were the first one to discover your unit was patched, maybe it was fate brought out by Reggie himself that it ended up in your hands on that day.

 

[gnilwob]

This is also the cheapest way of doing it.

On another note, considering that you were the first one to discover your unit was patched, maybe it was fate brought out by Reggie himself that it ended up in your hands on that day.

By the way, Thanks for the idea.

FYI, I shipped mine to them yesterday.
So it is not in my possession anymore.

 

[Deleted User]

R.I.P anyone who updated a patched Switch

 

[fst312]

Waiting for my jig, should get it by Monday, I have two switch’s at home, one that isn’t mine that was bought on launch month and one that is mine that was bought this month, thanks for this guide. The way I was going to test was trying to make a backup but this way seems to be the best way. If my switch is patched, I’m returning it.

 

[Elliott1986]

Is there any reason you have to inject the payload through command line? For some reason I couldn't get that to work so we just injected it through the TegraRcmGUI program itself, and a qr code came up on my switch. Just wanted to be sure since I couldn't confirm on command line.

 

[gnilwob]

Is there any reason you have to inject the payload through command line? For some reason I couldn't get that to work so we just injected it through the TegraRcmGUI program itself, and a qr code came up on my switch. Just wanted to be sure since I couldn't confirm on command line.

Command line is used since it offers a more detailed explanation on what is going on.
But if you use GUI and it works(you can see QR code) then you have an unpatched unit.

 

[PatchTuesday]

Nice guide. Glad I have an exploitable unit though. I just decided last month to get one.glad I did when I did

 

[meuhflo]

Think mine is patched as it's brand new and as I get the 0X0000 answer

I was just wondering if it might be my USB C to USB C cable not suitable for the process ?

 

[jamesq97]

Think mine is patched as it's brand new and as I get the 0X0000 answer

I was just wondering if it might be my USB C to USB C cable not suitable for the process ?

looks patched. does noot look like a cable issue.

 

[fst312]

Is there any reason you have to inject the payload through command line? For some reason I couldn't get that to work so we just injected it through the TegraRcmGUI program itself, and a qr code came up on my switch. Just wanted to be sure since I couldn't confirm on command line.

How long did it take for the qr code to appear. I’m also having trouble getting the command to work. Either my usb c isn’t that great or my switch is patched.

--------------------- MERGED ---------------------------

is it normal that my usb says device not recognized, when I put it in the port, even though my switch still charges.

 

[gnilwob]

How long did it take for the qr code to appear. I’m also having trouble getting the command to work. Either my usb c isn’t that great or my switch is patched.

--------------------- MERGED ---------------------------

is it normal that my usb says device not recognized, when I put it in the port, even though my switch still charges.

Have you installed driver ?

 

[fst312]

Will test launch switch again, the driver is now installed but so far my new switch doesn’t load anything, not responding.

 

[magico29]

you are missing the driver,looks like u installed the wrong one.
also run tegraRCM b4 plug the switch to the pc.
i got same problem with tegra,b4 ask always to install the drivers.use zadig 2.3 with tegrarcm open.

 

[wurstpistole]

So if I just put my SX PRO dongle in the switch and it boots SX OS, I think that means unpatched.

 

[magico29]

So if I just put my SX PRO dongle in the switch and it boots SX OS, I think that means unpatched.

yes sir,if not then is patched.

 

[wurstpistole]

How long did it take for the qr code to appear. I’m also having trouble getting the command to work. Either my usb c isn’t that great or my switch is patched.

--------------------- MERGED ---------------------------

is it normal that my usb says device not recognized, when I put it in the port, even though my switch still charges.

If the driver is installed correctly, and the Switch is in RCM mode, the Switch will show up in Windows device manager as APX device under an entry called libusbK. If it does, then it is in RCM and you can launch the payload. This is like instant.

 

[PatchTuesday]

So if I just put my SX PRO dongle in the switch and it boots SX OS, I think that means unpatched.

Did you get a new Switch

 

[wurstpistole]

Did you get a new Switch

It's on the way to me. What alternative do I have, really...

 

[PatchTuesday]

Alright man. Good luck

 

[gamesquest1]

seems crazy they would patch the bootrom exploit and then still ship them with a hackable firmware version..Nintendo eh

I wonder when the first patched bootrom + 5.x consoles will be hitting the shelves