Hacking 3DS shuts down INSTANTLY when i do a full install!

[GerbilSoft]

I believe you should use this version instead, unless someone else says not to. https://github.com/AuroraWright/SafeA9LHInstaller/releases

The latest version here uses OTPLess, which is known to cause bricks in a small percentage of cases for some unknown reason.

 

[Dimensional]

The latest version here uses OTPLess, which is known to cause bricks in a small percentage of cases for some unknown reason.

True. What about 2.0.3? I used it successfully in the A9LH installation guide posted on here by Hyoretsu, and given he's already downgraded to 2.1.0, he would only need the installer.
https://github.com/AuroraWright/SafeA9LHInstaller/releases/tag/v2.0.3

 

[GerbilSoft]

IIRC Plailect's 2.0.6 is basically 2.0.3 but with some extra changes. 2.0.3 should be usable.

 

[HyperT]

I believe you should use this version instead, unless someone else says not to. https://github.com/AuroraWright/SafeA9LHInstaller/releases

Thats 21 different releases. 2.0.6 should be fine - it's a plailect build with an extra otp.bin 'fix'. But yea if everything else seems in order [need to see some screenshots] - try 2.0.3

 

[FIXMY3DS]

I believe you should use this version instead, unless someone else says not to. https://github.com/AuroraWright/SafeA9LHInstaller/releases

Now i need to see people reply saying that this is approved when you are following Plailect's guide.

--------------------- MERGED ---------------------------

Thats 21 different releases. 2.0.6 should be fine - it's a plailect build with an extra otp.bin 'fix'. But yea if everything else seems in order [need to see some screenshots] - try 2.0.3

So it is not safe to use the latest version of the fork in Plailect's guide?

 

[HyperT]

Now i need to see people reply saying that this is approved when you are following Plailect's guide.

--------------------- MERGED ---------------------------


So it is not safe to use the latest version of the fork?

2.0.6 is fine, it's compiled by the writer of the guide with a 'fix' that would have saved those people who flashed using someone elses otp.bin - before that was made the version used by the guide and used by many people was 2.0.3 --the ones above that are for otpless install on n3ds or updating a9lh

 

[FIXMY3DS]

The latest version here uses OTPLess, which is known to cause bricks in a small percentage of cases for some unknown reason.

So what version should i actually use? I'm sorry if i'm being annoying.

 

[GerbilSoft]

So what version should i actually use? I'm sorry if i'm being annoying.

2.0.6 *should* work. If it doesn't, 2.0.3.

Don't use 2.6.x.

 

[FIXMY3DS]

2.0.6 *should* work. If it doesn't, 2.0.3.

Don't use 2.6.x.

It doesn't show the download for the v2.0.6 version.

 

[GerbilSoft]

It doesn't show the download for the v2.0.6 version.

2.0.6 is on Plailect's fork: https://github.com/Plailect/SafeA9LHInstaller/releases

 

[FIXMY3DS]

Thats 21 different releases. 2.0.6 should be fine - it's a plailect build with an extra otp.bin 'fix'. But yea if everything else seems in order [need to see some screenshots] - try 2.0.3

Wait, i'm confused now. Should i download the v2.0.3 version of AuroraWright's fork?

 

[HyperT]

Wait, i'm confused now. Should i download the v2.0.3 version of AuroraWright's fork?

Post some screenshots of your sdcard first.
A9lhinstaller is made by AuroraWright --- so yes 2.0.3 will be an official release from here
The 2.0.6 is a fork by Plailect --- this version should also be fine, that's why its in the guide.

 

[FIXMY3DS]

Post some screenshots of your sdcard first.
A9lhinstaller is made by AuroraWright --- so yes 2.0.3 will be an official release from here
The 2.0.6 is a fork by Plailect --- this version should also be fine, that's why its in the guide.

Here you go friend:

 

[FIXMY3DS]

Post some screenshots of your sdcard first.
A9lhinstaller is made by AuroraWright --- so yes 2.0.3 will be an official release from here
The 2.0.6 is a fork by Plailect --- this version should also be fine, that's why its in the guide.

Please reply.. why did you like with no response? Someone? Say something? Hello?

 

[HyperT]

Here you go friend:View attachment 76202

Those look fine, the above files aren't needed, you might want them later so keep them somewhere. Only thing I'd check is if you can read/write to the sdcard and check it for errors/corruption with chkdsk and/or hwtest

 

[munchy_cool]

are you connected to the internet? can you open other pages in web browser?

 

[FIXMY3DS]

are you connected to the internet? can you open other pages in web browser?

Yes i am connected to the Internet and can visit other pages. I'm slowly losing hope.

--------------------- MERGED ---------------------------

View attachment 76213

Those look fine, the above files aren't needed, you might want them later so keep them somewhere. Only thing I'd check is if you can read/write to the sdcard and check it for errors/corruption with chkdsk and/or hwtest

I already checked for errors using chkdsk and hwtest. Didn't work. The more that solutions don't work, the more that i am scared to touch my 3DS. Thank you so much for trying to help. But i still can't do a full install after all these steps. I actually haven't installed AuroraWright's version yet because i am scared.

 

[munchy_cool]

are you sure your console was European region before ? right now you have European 2.1 installed ..

 

[GerbilSoft]

Extra files on the SD card outside of the a9lh directory shouldn't cause problems.

SafeA9LHInstaller showing the installation screen, then shutting down when pressing Select without doing *anything* is an unusual failure mode. @Plailect any advice here?

 

[FIXMY3DS]

are you sure your console was European region before ? right now you have European 2.1 installed ..

Yup, i own a European 3DS.

--------------------- MERGED ---------------------------

Extra files on the SD card outside of the a9lh directory shouldn't cause problems.

SafeA9LHInstaller showing the installation screen, then shutting down when pressing Select without doing *anything* is an unusual failure mode. @Plailect any advice here?

So when i installed 2.1.0 the screen was normal, looking good like usual. So then i went to type "http://2xrsa.3ds.guide" in the webbrowser and the installation screen popped up like it is supposed to. So then i pressed Select and when i did, it instantly shut down. So when i turn it on again the screens started flashing colors. Like everything is changing color constantly (Or like given a random color tint or how should i explain it). The color flashing issue still remains.