Hacking bricked switch ? error 2002-4686

brickedswitchelron

Member
OP
Newcomer
Joined
Oct 20, 2019
Messages
5
Trophies
0
Age
36
XP
60
Country
Netherlands
So I had my switch on 8.0.0 and I accidentally updated to 9.0.1 . I tried to stop it but the damage was done. after that I restored my Nand which I had from version 6.0.0 and tried to start up an old and latest version of reinx and atmosphere but both got a magic package2 invalid error.
I also had a rawnand which I made from version 8.0.0. but when I restored that I got an 2002-4686 error
after that I updated with the switch recovery mode to 9.0.1 in order to try and get it back to work (i dont really know what im doing)
No when I try to boot up the OFW , I see the switch logo and after that the 2002-4686 error again. even without a sd card inside.

Can anybody help me or is my switch toast?
 
  • Like
Reactions: FXDX

crono999

Active Member
Newcomer
Joined
Nov 15, 2006
Messages
26
Trophies
1
XP
678
Country
If the switch boots and give error codes mostly its not bricked then.

Try to enter recovery mode

Power off the console

Press POWER button + volume up + volume down at the same time

Release all buttons when the Switch logo appears.

Welcome to the Recovery Mode

Format or update switch.
 
  • Like
Reactions: FXDX

brickedswitchelron

Member
OP
Newcomer
Joined
Oct 20, 2019
Messages
5
Trophies
0
Age
36
XP
60
Country
Netherlands
If the switch boots and give error codes mostly its not bricked then.

Try to enter recovery mode

Power off the console

Press POWER button + volume up + volume down at the same time

Release all buttons when the Switch logo appears.

Welcome to the Recovery Mode

Format or update switch.

I have updated the Switch that way. when I try to initialize to factory settings, I get the same error code
 
  • Like
Reactions: FXDX

crono999

Active Member
Newcomer
Joined
Nov 15, 2006
Messages
26
Trophies
1
XP
678
Country
Damm that sucks!!


Mostly a factory reset (without keeping save data) fixe a lot.


Can you still boot in CFW?



Is there a gamecard in your switch? (try to boot with and without)



So long you have RCM try to reflash nand (NxNandManager) keep trying, it took me 3 times with a switch last time to get it working again. (flashing/factory reset)


Hope you get it back to life!
 
  • Like
Reactions: FXDX

FXDX

Well-Known Member
Member
Joined
Sep 15, 2019
Messages
325
Trophies
0
XP
1,973
Country
Dominican Republic
I have updated the Switch that way. when I try to initialize to factory settings, I get the same error code
Hey there,
Try the method in the link below, if you fail to do otherwise. I had a switch that was bricked with a wrong update without having before a valid nand dump and that gave blue screen on startup and I managed to bring it back to life, with this tutorial. I do not know if it will help you in your case, but if you do not find another solution try. You see that it is not easy to do, read the steps carefully on the steps you have to follow. If you need help give me a PM. Good luck.
Upgrading/Downgrading Manually With a PC:
https://switch.homebrew.guide/usingcfw/manualchoiupgrade
 
Last edited by FXDX,

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    straferz @ straferz: Anybody know why this is happening to my ACWW town...