Toggle sidebar

Hacking SWITCH NOOB PARADISE - Ask questions here

  • Thread starter Thread starter APartOfMe
  • Start date Start date
  • Views Views 6,208,844
  • Replies Replies 48,055
  • Likes Likes 66
thekarter104 said:
Thanks.

Im not really feeling about buying a new SD card. According to the guide you need a 128GB for emuMMC...
Not sure if 64GB can, 32GB will be occupied of NAND?
Click to expand...
128GB would be bare minimum, on principle I don't recommend under 512gb. Maybe you're cool with constantly moving stuff around, doesn't work for me.
 
  • Like
Reactions: Blythe93
It's started taking a really long time to install games—does anyone know what the problem might be?
It takes about 40 minutes to install a 15 GB game on DBI.
 
I am new to the switch modding community, I have a patched v1 picofly running Hats. Are there any discord groups I could join to keep learning the hobby?
 
Bajdo said:
Ok, it's time to update again. Which is the current guide to update CFW to 22.5.0?
Thanks in advance 🙏
Click to expand...
impeeza

Homebrew Tutorial  Thread 'Ultimate guide to upgrade your firmware/Atmosphère'

ONLY UPDATE YOUR CONSOLE TO 2x.x.x IF ALL THE HOMEBREW YOU USE IS UPGRADED




Sometimes you need to upgrade your console, upgrade the firmware or upgrade Atmosphère, using the @l7777 's guide (https://gbatemp.net/threads/updating-hekate-atmosphere-and-hos.631739/) as base I hope to create a list of necessary steps to successful upgrade your console.

This guide uses Hekate, if you don't want to use Hekate skip the steps about it. You may loose some features.




Make a backup.​

Always make a full backup of your console, so if...​

  • Like
  • Love
  • Wow
 
  • Like
Reactions: Blythe93 and Bajdo
jkm81 said:
impeeza

Homebrew Tutorial  Thread 'Ultimate guide to upgrade your firmware/Atmosphère'

ONLY UPDATE YOUR CONSOLE TO 2x.x.x IF ALL THE HOMEBREW YOU USE IS UPGRADED




Sometimes you need to upgrade your console, upgrade the firmware or upgrade Atmosphère, using the @l7777 's guide (https://gbatemp.net/threads/updating-hekate-atmosphere-and-hos.631739/) as base I hope to create a list of necessary steps to successful upgrade your console.

This guide uses Hekate, if you don't want to use Hekate skip the steps about it. You may loose some features.




Make a backup.​

Always make a full backup of your console, so if...​

  • Like
  • Love
  • Wow
Click to expand...
Yikes, so it's now more risky/complicated than it was before? 😬
 
  • Like
Reactions: Blythe93
Bajdo said:
Yikes, so it's now more risky/complicated than it was before? 😬
Click to expand...
it's simple
update cfw files so cfw works when you update
backup your files in case something goes south
download desire fw file update
update emunand with daybreak
update sysnand if you want
read and make sure you dont have any conflicting configuration like blank prodinfo
 
Last edited by jkm81,
  • Like
Reactions: Blythe93 and Bajdo
Not sure if this the right place to post this but I am trying to run The Last Remnant on Ryujinx. I am trying to use the Undub patch but nothing is working. The voices remain in English. Does anyone know what I can do?
 
Just got myself a Switch, with FW 22.5.0 installed and I have separate sys and emunands. It seems to be possible to downgrade the emunand to earlier HOS version, but are there expected or unexpacted pitfalls if I want to revert to 19-ish?

Also, if I do revert, are the already installed tings kept, or do I need to reinstall everything from scratch?
Post automatically merged:

Aaaaand to answer myself - the information was spread thin on the internets, but using old tuts etc. I did the following:
  • Installed 19.0.1 to the EmuMMC using Daybreak and in my case using the FAT32 only option and doing a clean slate install.
  • After the installation, before first boot into HOS I used the downgrade fixer tool (better be safe than sorry I guess).
  • On the first boot into HOS, I deleted the "user content" from SD - losing my saves and installed stuff. No biggie, reinstall won't take long and I had JKSV available just in case anyways.
Pros:
  • Lighter HOS (I personally don't need the more recent FW's for either S2 or game compatibility).
  • No need to either live with game update nags baked in the system or go through several hoops in order to remove them.
  • No user experience enhancements!
Cons:
  • Doing the downgrade loses all installed content, so better have backups (and JKSV) handy.
Apparently from now on, I can keep the Emu and SYS at separate versions, but have to track SYS version with Atmos, Hekate etc. Suits me, but probably not everyones cup of tea.
 
Last edited by lwiz,
Got a few games that fail to start. I get a black screen with an exclamation mark in a square box and underneath that the text:
Could not start the software.
Please try again from the HOME Menu.

In this case it's The Legend of Heroes: Trails from Zero and The Legend of Heroes: Trails to Azure that do so for me. I updated them to the latest versions, which should require firmware 22.5.0. My Switch runs firmware 22.5.0 along with the corresponding Atmosphere version, sigpatches, etc. As far as I can tell, the files are not corrupt at all; NxFileViewer reports their state is original.

Why does this error show up? And how can I fix it? Not just for these games, but in general if this shows up for any game.
 
Last edited by Nynrah,
So I decided starting on the Switch, but I have a couple of important questions.
The guide tells you that you have to be a primary Pass Enabled console. However, the console has 8 profiles that are used for Animal Crossing. 2 profiles are linked to a Nintendo account. 1 account belongs to me, but since I use my OLED and Switch 2 as primary, I'm not feeling like enabling this old Switch as primary... The other account is only linked to this Switch, is it still possible to hack it in the EmuMMC?

The other question is, since 23.0.0 is not supported, I don't want to connect to the internet, but I need to disable the cloud saves on this old Switch, since my account has online. What to do?

Thanks.

Edit - as extra information, I have this:
images


I decided to get this as I have a severe motor skill issue, so I'm actually still super scared of using that jig... It's a pink-ish red one, is that good?
 
Last edited by thekarter104,
thekarter104 said:
The guide tells you that you have to be a primary Pass Enabled console.
Click to expand...
Which guide?

thekarter104 said:
However, the console has 8 profiles that are used for Animal Crossing. 2 profiles are linked to a Nintendo account. 1 account belongs to me, but since I use my OLED and Switch 2 as primary, I'm not feeling like enabling this old Switch as primary... The other account is only linked to this Switch, is it still possible to hack it in the EmuMMC?
Click to expand...
I've never seen that as a requirement. I have a modded Switch that I've set up emuNAND on and all the accounts I have there have fake IDs added by linkalho. Not sure what you're trying to accomplish here. :D

thekarter104 said:
Edit - as extra information, I have this:
images


I decided to get this as I have a severe motor skill issue, so I'm actually still super scared of using that jig... It's a pink-ish red one, is that good?
Click to expand...
Most likely a clone of the original one if you've acquired it recently but it still can be useful as it sends the hekate payload that first checks if there's a update.bin on your SD card which it'll load if newer instead of the one onboard.
 
Blythe93 said:
Which guide?
Click to expand...
Probably this one - the same I followed. I guess the "requirement" is geared towards easier title takeoversl and is more a soft rather than hard one.

Actually the reason from the guide:
  • Q: Why do I need to set my console as primary before starting this guide?

    A: The Switch will otherwise try to connect to Nintendo servers before starting apps, which can lead to unexpected delays and make emuMMCs completely unusable.
 
lwiz said:
Probably this one - the same I followed. I guess the "requirement" is geared towards easier title takeoversl and is more a soft rather than hard one.

Actually the reason from the guide:
  • Q: Why do I need to set my console as primary before starting this guide?

    A: The Switch will otherwise try to connect to Nintendo servers before starting apps, which can lead to unexpected delays and make emuMMCs completely unusable.
Click to expand...
Is it ok if the other account just can be used? Since that other account is linked to that Switch and no other Switch is using that account. Will it still try to connect to Nintendo then? And yes, it's the Switch guide website I try to follow yes.

Blythe93 said:
Which guide?


I've never seen that as a requirement. I have a modded Switch that I've set up emuNAND on and all the accounts I have there have fake IDs added by linkalho. Not sure what you're trying to accomplish here. :D
Click to expand...
This guide: https://switch.hacks.guide/

There's 1 Nintendo account as the only Switch, so I hope I don't need to do anything.
So account setup on this old Switch I'm trying to mod is as follows from left to right before starting apps/games:

Account 1: My own account, linked to 3 Switches, Pass enabled on Switch 2.
Account 2: My brother that used the account on the old Switch, the only Switch that has been linked too.
6 other profiles without Nintendo accounts. They're for Animal Crossing to build extra houses.

So account 2 has probably the Pass Enabled console? So is it pass enabled so I can continue the guide, otherwise I'm doomed.

From the guide:
"If you choose the emuMMC path introduced later in the guide, you will also need a microSD card that is at least 128 gigabytes. In this path, it'll be important to disable the Automatic Save Data Cloud function beforehand, as well as making sure the Switch is set as the primary Pass-Enabled console."

^So there's that, unfortunately.
 

Site & Scene News

Go to forum More news

Popular threads in this forum

GTA V port?

Emulation  Vita3K - PlayStation Vita

Homebrew game Project  [Release] The Minish Cap – Alek's Ultimate NX Edition | Dual Screen, FLIP GRIP SUPPORT, Touch, RetroAchievements

Homebrew Homebrew game  PES 2021 - Switch Port

Homebrew Homebrew game Project  The Legend of Zelda: A Link to the Past - ALEK'S Ultimate NX

Homebrew  sys-HDR: HDR tonemapping sysmodule for Switch, works in all games/apps!

Hacking Gaming  CAPTAIN TSUBASA 2: WORLD FIGHTERS Save Modded

Homebrew Homebrew game  PvZ Ultimate - Switch Port