Hacking SWITCH NOOB PARADISE - Ask questions here

[Draxzelex]

I have a couple questions that perplex me a bit, I just want to make sure I haven't made a horrific mistake.

I've done the backups of NAND, Keys, all fine.
I've created an Emunand, made sure Exosphere is installed, all that good stuff - Serials say zeroes and I can't connect to nintendo servers.

Is it normal for all of my save data and installed games to also be on the emunand? Is it fine to conclude that it literally copies everything, and doesn't just make a blank?

Also, I've made sure it's actually booted into emunand, it says AMS 1.4.0|E.

emuMMC is initially a copy of sysMMC, not a blank. If you want it to be blank, you will have to delete everything after making emuMMC. There is no way to create a black emuMMC from the start.

 

[G0R3Z]

emuMMC is initially a copy of sysMMC, not a blank. If you want it to be blank, you will have to delete everything after making emuMMC. There is no way to create a black emuMMC from the start.

Wonderful - Just making sure. Thank you very much. Switch stuff is just slightly more involved than the other consoles I've done before - So just checking with the pros

 

[chronica]

What OS needed to boot 15.0.1? Im a noob in these cases yet

 

[Hayato213]

What OS needed to boot 15.0.1? Im a noob in these cases yet

Atmosphere

 

[chronica]

Whats the diferences between those os'es? Thanks

 

[Jack_Bauer]

Hi everyone,
Sorry if I am off topic but I came accross an error message yesterday and couldn't figure it out.
The error code is 2618-0006. It occured when I tried to play Ultra street fighter 2 on local wireless with my brother. I have to mention that we both have a V1 switch with emunand and using the same version of the game. When I checked nintendo's support page, I found that this code is showed when we try to play with the same copy of the game on 2 different systems. I went on to "obtain" another copy as I have a US version so I downloaded a EU and JP version to try and isntall one of them as it should be detected as 2 different versions.
What happened is after deleting the current version and installing both other versions, it is still occuring. First telling me I can't join lobby, then error message popping up.
I was on firmware 14 so I updated Atmosphere and FW to the latest using All In One. Still the same issue. This is happening only with street fighter, with other games, everything works normally.
Any suggestions on what more should I do/try to be able to play again? Is this issue happeneing to you as well? Is it related to the game itself or to a setup on our systems? I should mention that ldn_mitm is of course deactivated when trying to play local wireless.

Thank you in advance for your help and again, sorry if off topic.

 

[manaconda]

Hey guys/gals n00b here in have a modded oled switch that I want to get a larger SD card for can anyone point me to a guide on doing that and keeping my game saves? Please thank you!

 

[G0R3Z]

Ahoy again. All working great - But I wondered if it was possible to divert my legally downloaded stuff (aka the nintendo folder) to the emunand so it will work there too? Atm it just tells me to download a game, which obviously i'm not going to do on an EMUnand.

 

[Hayato213]

Whats the diferences between those os'es? Thanks

Only Atmosphere work with firmware 15.0.1. The other two ReiNX and SX OS are dead

Post automatically merged: Nov 8, 2022

Hey guys/gals n00b here in have a modded oled switch that I want to get a larger SD card for can anyone point me to a guide on doing that and keeping my game saves? Please thank you!

Any emunand?

 

[Draxzelex]

Whats the diferences between those os'es? Thanks

The differences are irrelevant since SX OS has been discontinued unofficially by its developers so the only CFW everyone is and should be using is Atmosphere. The reason being was already explained in that SX OS doesn't work on firmware 15.0. The highest firmware it supports is 11.0 which makes the CFW useless because newer games require firmware versions higher than that and there is no way to bypass that.

Hey guys/gals n00b here in have a modded oled switch that I want to get a larger SD card for can anyone point me to a guide on doing that and keeping my game saves? Please thank you!

Saves are stored in the console's internal memory so moving to a larger SD card has no effect on save data. Other than that, you can just copy and paste the files from one SD card to another. The only thing you cannot copy and paste is a partition-based emuMMC. To move that, you must first dump it with Hekate then use Hekate again to restore it on the new SD card.

Ahoy again. All working great - But I wondered if it was possible to divert my legally downloaded stuff (aka the nintendo folder) to the emunand so it will work there too? Atm it just tells me to download a game, which obviously i'm not going to do on an EMUnand.

In your emummc.ini file, it also designates the Nintendo folder used by your emuMMC. Simply copy the contents of your original Nintendo folder to the one designated for your emuMMC.

 

[Hayato213]

Ahoy again. All working great - But I wondered if it was possible to divert my legally downloaded stuff (aka the nintendo folder) to the emunand so it will work there too? Atm it just tells me to download a game, which obviously i'm not going to do on an EMUnand.

Just use NSP for Emuannd stuffs, and keep your legally purchased stuffs on clean NAND.

 

[G0R3Z]

In your emummc.ini file, it also designates the Nintendo folder used by your emuMMC. Simply copy the contents of your original Nintendo folder to the one designated for your emuMMC.

Ah, okay, thanks. That'd take up a lot of space though. I'd probably have to migrate to a much larger SD card later on to do that.

Post automatically merged: Nov 8, 2022

Just use NSP for Emuannd stuffs, and keep your legally purchased stuffs on clean NAND.

That's probably a good idea, heh.

Been playing some awkward or normally import stuff through NSPs that I usually wouldn't be able to. Probably the most 'able' modded consolefor myself so far. It's got so much to do on it.

 

[Ritsuki]

Hi there,

So I want to update update my SysNAND and EmuNAND, but I'm not sure how to do it properly to avoid bricking or acess to CFW.
So if I'm correct, I can update SysNAND through official procedure, and to update EmuNAND, I have to update Atmosphere first and use Daybreak to update EmuNAND?

Thanks in advance!

 

[Draxzelex]

Hi there,

So I want to update update my SysNAND and EmuNAND, but I'm not sure how to do it properly to avoid bricking or acess to CFW.
So if I'm correct, I can update SysNAND through official procedure, and to update EmuNAND, I have to update Atmosphere first and use Daybreak to update EmuNAND?

Thanks in advance!

Yes. Also updating firmware won't ever change your access to CFW because the exploit used is tied to the hardware, not the software. It also would never cause a brick unless Nintendo wanted a lawsuit on their hands for their own firmware updates bricking people's devices.

 

[Ritsuki]

Yes. Also updating firmware won't ever change your access to CFW because the exploit used is tied to the hardware, not the software. It also would never cause a brick unless Nintendo wanted a lawsuit on their hands for their own firmware updates bricking people's devices.

Thanks a lot!

 

[G0R3Z]

I installed a particular game from an NSP, and it's still giving me the ol 'update is available' routine. I assume this is still down to firmware IDs and such?

 

[Hayato213]

I installed a particular game from an NSP, and it's still giving me the ol 'update is available' routine. I assume this is still down to firmware IDs and such?

It is because you didn't block communication with Nintendo server.

 

[Draxzelex]

I installed a particular game from an NSP, and it's still giving me the ol 'update is available' routine. I assume this is still down to firmware IDs and such?

Nintendo are tricky. Embedded within firmware updates are a list of all available updates for games so as you update your firmware, you also update this list. So even if you're offline, the Switch will know if there is an update available for your game.

 

[G0R3Z]

Nintendo are tricky. Embedded within firmware updates are a list of all available updates for games so as you update your firmware, you also update this list. So even if you're offline, the Switch will know if there is an update available for your game.

I did block ninty communications, there's just nothing I can do about that?

It is because you didn't block communication with Nintendo server.

I did. I'm using Exosphere, and have the blocked nintendo servers in the default.txt files. I've used DNS checkers, tried accessing the Eshop to make sure. Blanked IDs and such.

 

[fquadro]

Hi all, I have a Mariko edition, where I can start for modding?