Hacking SWITCH NOOB PARADISE - Ask questions here

[Hayato213]

Thank you very much for your helpful reply. Does that mean that I would be able to restore the sysnand back to 10.4 from my original backup if I wanted to ?

Good chance it won't boot if you burn your fuse count to 16, 10.0.4 fuse count is 13, and 14.1.2 is 16, you have to use a custom bootloader to preserve your fuse.

 

[binkinator]

Thank you very much for your helpful reply. Does that mean that I would be able to restore the sysnand back to 10.4 from my original backup if I wanted to ?

You will want to create a new backup after you upgrade firmware because if you slip up and burn fuses (and you will slip up) you won’t be able to boot. There is nothing special about 10.4 and on the off chance you want to go to 10.4 or earlier, you can always do it in Emunand. There’s nothing to be gained by rolling back to 10.4 on Sysnand.

 

[Tinkerbell]

Thank you both very much for clearing that up for me. Is there a program I can use to check the fuse count?

 

[binkinator]

Thank you both very much for clearing that up for me. Is there a program I can use to check the fuse count?

Hekate will show fuse count. (see Burnt Fuses in orange…4th line down on the left)

Here’s the FW:Fuse chart for reference: https://switchbrew.org/wiki/Fuses#Anti-downgrade

 

[TudorBlue]

Need help please. Ive been trying to transfer nsp files to and from the micro sd card out of a softmodded switch. I keep on getting errors. I cannot copy and paste to the card, I cannot copy and paste from the card. Any help or advice with this will be very much apreciated so thanks in advance guys. Stop the transfer almost right away and tells me to format my micro sd card. Help

 

[binkinator]

Need help please. Ive been trying to transfer nsp files to and from the micro sd card out of a softmodded switch. I keep on getting errors. I cannot copy and paste to the card, I cannot copy and paste from the card. Any help or advice with this will be very much apreciated so thanks in advance guys. Stop the transfer almost right away and tells me to format my micro sd card. Help View attachment 329905View attachment 329906

https://support.microsoft.com/en-us...o-a-file-343394a6-1d65-802f-6e9e-91d94c661185

What type of SDCard are you using? Make, model, size, purchase location

How is your SDCard formatted? (Exfat or FAT32)

Is your SDCard sitting in your PC or is it in your Switch and mounted over a USB cable?

 

[TudorBlue]

https://support.microsoft.com/en-us...o-a-file-343394a6-1d65-802f-6e9e-91d94c661185

What type of SDCard are you using? Make, model, size, purchase location

How is your SDCard formatted? (Exfat or FAT32)

Is your SDCard sitting in your PC or is it in your Switch and mounted over a USB cable?

The card is a 128 GB. It's formatted to exfat. I can't copy the files off the card, every time I try and copy all the files it gets to around 30% then stops. It's not my reader or pc as it picks up other cards right away.

Sent from my CPH2211 using Tapatalk

 

[binkinator]

The card is a 128 GB. It's formatted to exfat. I can't copy the files off the card, every time I try and copy all the files it gets to around 30% then stops. It's not my reader or pc as it picks up other cards right away.

Sent from my CPH2211 using Tapatalk

That card looks sketchy af my friend plus exfat is easy to corrupt on a switch.

Probably want to check it with: h2testw
Provided it passes you should reformat it to FAT32 using: Rufus

 

[Hayato213]

That card looks sketchy af my friend plus exfat is easy to corrupt on a switch.

Probably want to check it with: h2testw
Provided it passes you should reformat it to FAT32 using: Rufus

https://www.amazon.co.uk/dp/B09X1VK...-be82-b8ff24ca1d12&tag=integralmemory_csuk-21

Looks like he has this.

 

[binkinator]

View attachment 329933

https://www.amazon.co.uk/dp/B09X1VK...-be82-b8ff24ca1d12&tag=integralmemory_csuk-21

Looks like he has this.

Fair enough. Would still like to see the results of h2testw to make sure.

 

[Revv23]

I figured out my launching issue - a little bit at least, anything installed from my older version of atmosphere was crashing, so I put in a game cart and was able to launch into HBmenu.

From there I tried installing off game card but I couldn't get that to work.

So I decided to update OFW to 14.0 with daybreak - and try again.

Now I'm getting an error that my game cart cant be read...

Anyone have an idea what I might have screw up this time?

Update - game cart runs fine in OFW. CFW can't read though. So I can't launch into HB menu as I don't have anything installed that will run.

 

[binkinator]

I figured out my launching issue - a little bit at least, anything installed from my older version of atmosphere was crashing, so I put in a game cart and was able to launch into HBmenu.

From there I tried installing off game card but I couldn't get that to work.

So I decided to update OFW to 14.0 with daybreak - and try again.

Now I'm getting an error that my game cart cant be read...

Anyone have an idea what I might have screw up this time?

Update - game cart runs fine in OFW. CFW can't read though. So I can't launch into HB menu as I don't have anything installed that will run.

There are settings that disable your GC in /atmosphere/config/stratosphere.ini and also /bootloader/hekate_ipl.ini. Most people don’t need their GC in pirate mode and it’s potential hassle, but if youre sure, there are settings available to make the change to enable it.

autonogc is documented here:
https://github.com/CTCaer/hekate

nogc is documented here:
https://github.com/Atmosphere-NX/Atmosphere/blob/master/config_templates/stratosphere.ini

an easy workaround for your dilemma is to “find“ a copy of Othello.nsp and install it with Tinwoo…then you have a game tile you can use to launch HBL using title override.

https://github.com/mrdude2478/TinWoo

 

[Ghostplane64]

quick question, but on the rentry guide for CFW, do I have to enable autoRCM or is it optional? Also, when it says to move back any previoulsy deleted files, Does that mean I extract and replace the files in the hakate, atmosphere, and sigpatches to my sd card?

 

[Hayato213]

quick question, but on the rentry guide for CFW, do I have to enable autoRCM or is it optional?

If you want preserve your fuse count on higher firmware, then use autoRCM. AutoRCM get rid of the need of a jig.

 

[Ghostplane64]

If you want preserve your fuse count on higher firmware, then use autoRCM. AutoRCM get rid of the need of a jig.

So does that mean always enter RCM mode when I turn on my switch and does that also mean I can boot into my clean sysnand using CFW won't get banned playing online?

 

[Hayato213]

So does that mean always enter RCM mode when I turn on my switch and does that also mean I can boot into my clean sysnand using CFW won't get banned playing online?

It will enter RCM mode at boot, if you have something like a trinket m0 if you set something to autoRCM and autoboot a payload it will boot into CFW. As for stock OS, there is a hekate option to boot into Stock OS, but do keep in mind stock OFW, and Sysnand CFW share the same NAND.

 

[Ghostplane64]

It will enter RCM mode at boot, if you have something like a trinket m0 if you set something to autoRCM and autoboot a payload it will boot into CFW. As for stock OS, there is a hekate option to boot into Stock OS, but do keep in mind stock OFW, and Sysnand CFW share the same NAND.

Ok so does this mean that my clean sysnand can be opened through hakate using the stock option and this will boot up the switch like it would without RCM?

 

[Hayato213]

Ok so does this mean that my clean sysnand can be opened through hakate using the stock option and this will boot up the switch like it would without RCM?

[Stock (SYSNAND)]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1

Yes as long your sysnand is clean you can boot and play online even booting via Hekate.

 

[Ghostplane64]

[Stock (SYSNAND)]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1

Yes as long your sysnand is clean you can boot and play online even booting via Hekate.

Thanks for the clarification. I wasn't sure if it'd be safe for the sysnand.

 

[Ghostplane64]

Sorry just one more question. When the rentry guide says to put you SD card back into your PC and move back any previously deleted files into your SD card, does that mean I should extract and replace the Amostphere, sigpatches, and hakate zips into my SD card?