Hacking SWITCH NOOB PARADISE - Ask questions here

[binkinator]

Just spent a week updating from SXOS to atmosphere downloading a bunch of content. Everything was working fine and then powered off my switch one day and then my SD card got corrupted. Any reason why this happens or how to prevent this or how to fix it?

Buy name brand sd cards, format fat32 (exfat drivers on Switch are trash), make frequent backups/rotate your sd cards.

wish there was more but that’s it really.

 

[Chaldothug45]

Buy name brand sd cards, format fat32 (exfat drivers on Switch are trash), make frequent backups/rotate your sd cards.

wish there was more but that’s it really.

Just to be on the safe side when I used choidujour to update my firmware, I chose exfat for my installation because my SD card is formatted to exfat, Will that matter if I switch to fat32 on my SD card. And if I copy all my files to my desktop from my SD card format MySD card and move my files back to the formatted SD card. Will the games read or will I have to redownload them again because they are originally installed in my SD card?

 

[binkinator]

Just to be on the safe side when I used choidujour to update my firmware, I chose exfat for my installation because my SD card is formatted to exfat, Will that matter if I switch to fat32 on my SD card. And if I copy all my files to my desktop from my SD card format MySD card and move my files back to the formatted SD card. Will the games read or will I have to redownload them again because they are originally installed in my SD card?

Firmware has two options 1) FAT32 and 2) FAT32+exfat. There are no issues with having the second case with exfat drivers installed. It‘s The actual formatting of your SDCard to exfat that forces the firmware to use the drivers. When you format your SDCard with FAT32 w/ 32k blocks using something like rufus the bad exfat drivers will remain dormant. You will need to back up your data to PC, format, and restore your data to get off of exfat. As long as your backup is good yiu will not lose data but if you’re already having issues…we may have garbage going into the backup.

e: Daybreak.nro is the replacement for Choidujour as Choi has not been updated and will cause issues.

 

[Chaldothug45]

Firmware has two options 1) FAT32 and 2) FAT32+exfat. There are no issues with having the second case with exfat drivers installed. It‘s The actual formatting of your SDCard to exfat that forces the firmware to use the drivers. When you format your SDCard with FAT32 w/ 32k blocks using something like rufus the bad exfat drivers will remain dormant. You will need to back up your data to PC, format, and restore your data to get off of exfat. As long as your backup is good yiu will not lose data but if you’re already having issues…we may have garbage going into the backup.

e: Daybreak.nro is the replacement for Choidujour as Choi has not been updated and will cause issues.

Thank you

 

[hotshot25120]

Hi, I just buy a new oled switch and I order a hwfly v4 from aliexpress.

what is the max sd card size I can use ?

 

[Draxzelex]

Hi, I just buy a new oled switch and I order a hwfly v4 from aliexpress.

what is the max sd card size I can use ?

2 TB.

 

[Hayato213]

Hi, I just buy a new oled switch and I order a hwfly v4 from aliexpress.

what is the max sd card size I can use ?

2TB technically but there is only 1TB on the market out there at the moment.

 

[hotshot25120]

thanks

 

[Walo]

What's the easiest way to block Nintendo's servers from your internet connection?

Downloaded the hombebrew "switch-90dns-setter.nro". I'd imagine that'd take care of it once I boot it right? And I'd imagine it'll make no difference if it's wired connection or wifi.

I know there was a way to block them by inputting some manual DNS settings but I'm not sure which way is considered best.

 

[binkinator]

What's the easiest way to block Nintendo's servers from your internet connection?

Downloaded the hombebrew "switch-90dns-setter.nro". I'd imagine that'd take care of it once I boot it right? And I'd imagine it'll make no difference if it's wired connection or wifi.

I know there was a way to block them by inputting some manual DNS settings but I'm not sure which way is considered best.

This will do DNS blocking and Prodinfo zeroing:

https://rentry.org/ExosphereDNSMITM

You can also check out Incognito_RCM and/or 90DNS but I just use the tools built into Atmosphere above w/ no issues.

 

[shinyaku]

Hi everyone,

I have an unpatched switch and I had tried to follow the guide (https://rentry.org/SwitchHackingIsEasy)

So I had set-up emuNAND with Atmosphere on Erista + set-up Exosphere / DNS MITM.

Official Firmware Version: 4.1.0
Atmosphere Version: 1.3.2
Hekate Version: 5.7.2
Enabled: AutoRCM

When I was booting for the first time on Atmosphere via Hekate, there were no problem and I was able to go to Homebrew Apps and download RetroArch. After, when I go to album and tried to load Goldleaf, I got an error launch code 2345-0037, not sure why. After that I turned off my switch to take a break. Later, when I tried to boot with TegraRCM and then boot Hekate, I had tried to launch Atmosphere but got only a logo of Atmosphere and then a black screen. I had tried to redo it but same thing is happening.

Setup of hetake_ipl.ini on Bootloader:

Any suggestion how to solve Atmosphere issue and also let me know if you need more info. Thank you!

 

[Draxzelex]

Hi everyone,

I have an unpatched switch and I had tried to follow the guide (https://rentry.org/SwitchHackingIsEasy)

So I had set-up emuNAND with Atmosphere on Erista + set-up Exosphere / DNS MITM.

Official Firmware Version: 4.1.0
Atmosphere Version: 1.3.2
Hekate Version: 5.7.2
Enabled: AutoRCM

View attachment 315624
View attachment 315626

When I was booting for the first time on Atmosphere via Hekate, there were no problem and I was able to go to Homebrew Apps and download RetroArch. After, when I go to album and tried to load Goldleaf, I got an error launch code 2345-0037, not sure why. After that I turned off my switch to take a break. Later, when I tried to boot with TegraRCM and then boot Hekate, I had tried to launch Atmosphere but got only a logo of Atmosphere and then a black screen. I had tried to redo it but same thing is happening.

Setup of hetake_ipl.ini on Bootloader:

View attachment 315625


Any suggestion how to solve Atmosphere issue and also let me know if you need more info. Thank you!

I recommend starting from scratch and following a better guide that has also been around for longer. This is the first guide to ever have been released that has also been updated regularly so it is in my opinion, the best guide to Switch hacking.

 

[shinyaku]

Thanks Draxzelex, so do I need to re-format my micro SD card to Fat32 as I did set-up as partition-based Emunand?

 

[Draxzelex]

Thanks Draxzelex, so do I need to re-format my micro SD card to Fat32 as I did set-up as partition-based Emunand?

No, you can keep your emuMMC untouched but redo all of the other files on your SD card with the guide I linked.

 

[Walo]

This will do DNS blocking and Prodinfo zeroing:

https://rentry.org/ExosphereDNSMITM

You can also check out Incognito_RCM and/or 90DNS but I just use the tools built into Atmosphere above w/ no issues.

Cool. Will check it out. You’re so helpful!!

 

[shinyaku]

No, you can keep your emuMMC untouched but redo all of the other files on your SD card with the guide I linked.

Thanks Draxzelex, I will follow your suggest guide. There were a lot of different guide that I didn't know which one is the best simple one.

https://switch.homebrew.guide
https://nh-server.github.io/switch-guide/
https://rentry.org/SwitchHackingIsEasy
https://www.cfwaifu.com/switch-emunand/
https://switchway.net

 

[Draxzelex]

Thanks Draxzelex, I will follow your suggest guide. There were a lot of different guide that I didn't know which one is the best simple one.

https://switch.homebrew.guide
https://nh-server.github.io/switch-guide/
https://rentry.org/SwitchHackingIsEasy
https://www.cfwaifu.com/switch-emunand/
https://switchway.net

Its fine, that is why you ask for other's opinions on the best guide. I've been following the Switch scene before the Fusee Gelee exploit leaked so I've seen the scene start from next to nothing to grow to its maximum potential to teetering down to where it is today. And I can say with full confidence that the first link is the best Switch hacking guide.

 

[shinyaku]

Hi Draxzelex, so I had tried to follow the guide and when I had launch the emuMMC, it froze on the Nintendo Switch logo.

I think it might be that the SD card might be corrupted or something. So I might need to start up fresh from the beginning,
But since my SD card was in partition (gives me E: + F: ), how can I format it back all together?

SD card is Sandisk Ultra 400 GB
Using guiformat tool to format to FAT32.

Also, do you know the name of the program that let you verify if the SD card is fine or corrupt?

Thank you for your help!

 

[simsimsim]

Hi guys. I keep getting this error whenever I accidentally held R when going into album and it forces me to reboot. I only get this when doing the above and not doing any other scenario so far so if I avoid doing that it should be fine since I don't really need to check the album. But ideally I would still like to know why this is happening.
Thanks for your help!

 

[binkinator]

Hi guys. I keep getting this error whenever I accidentally held R when going into album and it forces me to reboot. I only get this when doing the above and not doing any other scenario so far so if I avoid doing that it should be fine since I don't really need to check the album. But ideally I would still like to know why this is happening.
Thanks for your help!

See if what this clown said helps any:

https://gbatemp.net/threads/override_config-not-working.612626/

e: if that doesn’t work please share the contents of your /atmosphere/config/override_config.ini