Toggle sidebar

Hacking SWITCH NOOB PARADISE - Ask questions here

  • Thread starter Thread starter APartOfMe
  • Start date Start date
  • Views Views 5,977,949
  • Replies Replies 47,906
  • Likes Likes 66
fusee.bin doesnt load, brings up a fatal errror - is fusee bin the best option to load a switch?

using hekate/atmosphere i then have to go to hekate/launch and syscfw


nintendo switch fw
 
Where do I actually put roms once Ive set everything up and do they need to be installed once they are moved in this location? Also can I use tinfoil to install them? Thanks!
 
Deko said:
Where do I actually put roms once Ive set everything up and do they need to be installed once they are moved in this location? Also can I use tinfoil to install them? Thanks!
Click to expand...
Yes, you can use tinfoil to install them, that's what I used to install mine, I just put them in the root of my SD and told tinfoil where they were.
 
steve_fox said:
Thank you, your answer confirmed my suspicion that it wasn't necessary and i dont think I will bother updating it then unless I come across a game that needs it but its good news that it can be updated that way!

I see the option In hekate to create an Android partition but will that break my Emunand Install meaning I need to re do that or can hekate adjust partition sizes without breaking things?
Click to expand...
It shouldn't.
itaital said:
Hi,
I use switched with atmosphere and I want to have emunand for using my original game and the internet
The problem is that I don't have enough space in my sd card can I use 1 sd card for atmosphere and another one for another emunand?
Click to expand...
That's not an issue as long as you can juggle between using 2 SD cards although you should be aware that the SD card slot on the Switch is prone to breaking very easily.
kyrusdemnati said:
fusee.bin doesnt load, brings up a fatal errror - is fusee bin the best option to load a switch?

using hekate/atmosphere i then have to go to hekate/launch and syscfw


nintendo switch fw
Click to expand...
Hekate is superior to fusee. You'd only use fusee if you're an Atmosphere purist.
kyrusdemnati said:
i am on 13.2 can i update?
Click to expand...
I only recommend updating if there is a game or other content that requires 14.X and as far as I'm aware, no such game exists as of yet. Remember that most issues happen when updating so always save updating as a last resort.
Deko said:
Where do I actually put roms once Ive set everything up and do they need to be installed once they are moved in this location? Also can I use tinfoil to install them? Thanks!
Click to expand...
They can go anywhere on the SD card since most title installers have you browse your SD card to install games. I also highly recommend using TinWoo Installer to install all of your games instead. Its what I personally use and I never have any issues while using it.
 
Hey new to modding I was wondering if there is a good way to install something like retroarch so that I can access it from the main menu I read about changing it to an nsp or using something called ulaunch or something called forwarder and I am not sure what the drawbacks/problems of these things are
 
Hello I'm a noobie in the modding switch. I have a issue with my switch. I accdentally downgraded my software from version 14.1.1 to 11.0.1. After I downgraded I launch atmosphere but it only showed the atmosphere logo and then show a black screen. Do you know an solution to this problem? Your help will be greatly appreciated.(also I'm using a modded chip Nintendo switch OLED RCM patch device)

This is my Hekateipl file
[config]
autoboot=0
autoboot_list=0
bootwait=5
backlight=100
autohosoff=2
autonogc=1
bootprotect=1
updater2p=0
debugmode=1
{ }



[Custom Firmware]
fss0=atmosphere/package3
cal0blank=1
atmosphere=1
kip1=atmosphere/*
kip1patch=nosigchk
logopath=bootloader/Chuong Anh Store.bmp
icon=bootloader/res/icon_payload.bmp
{ }

[Original Firmware]
fss0=atmosphere/package3
emummc_force_disable=1
stock=1
cal0blank=0
logopath=bootloader/Original.bmp
icon=bootloader/res/icon_switch.bmp

[config]
updater2p=1
{------ Atmosphere ------}
[Atmosphere FSS0 EmuMMC]
fss0=atmosphere/package3
kip1=atmosphere/kips/*
emummcforce=1
icon=bootloader/res/emu_boot.bmp
{}
[Atmosphere FSS0 SYS]
fss0=atmosphere/package3
kip1=atmosphere/kips/*
emummc_force_disable=1
icon=bootloader/res/sys_cfw_boot.bmp
{}
{-------- Stock ---------}
[Stock SYS]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/stock_boot.bmp
 

Attachments

  • 20220501_004543.mp4
    33.7 MB
  • 20220504_172353.jpg
    20220504_172353.jpg
    1.8 MB · Views: 89
Last edited by poketop21,
Well that was fun, my advice to anyone who even remotely thinks they might want to run Android at some point is to make your Partition at the time of creating Switch CFW, even if you dont actually install Android at that point.

Ive just had to export 150gb of data from my SD card to then be able to create an Android Partition and then import that 150gb back to my SD!
 
  • Like
Reactions: binkinator
poketop21 said:
Hello I'm a noobie in the modding switch. I have a issue with my switch. I accdentally downgraded my software from version 14.1.1 to 11.0.1. After I downgraded I launch atmosphere but it only showed the atmosphere logo and then show a black screen. Do you know an solution to this problem? Your help will be greatly appreciated.(also I'm using a modded chip Nintendo switch OLED RCM patch device)
Click to expand...
how did you "Accidentally" downgrade to 11.0.1? its a fairly lengthy process, not a simple task one could accidentally do.
 
  • Like
Reactions: poketop21 and Takokeshi
Chaosta said:
how did you "Accidentally" downgrade to 11.0.1? its a fairly lengthy process, not a simple task one could accidentally do.
Click to expand...
Also the reason why I downgraded my firmware is because I couldn't launch or install tinfoil. When I tried to install tinfoil it was keep on getting error code 2016-0060. I check on google how to fix this issue people said that if I downgrade my firmware to 11.0.1 it should fix the issue. Unfortunately it didn't resolve my issue.
 
Last edited by poketop21,
poketop21 said:
Also the reason why I downgraded my firmware is because I couldn't launch or install tinfoil. When I tried to install tinfoil it was keep on getting error code 2016-0060. I check on google how to fix this issue people said that if I downgrade my firmware to 11.0.1 it should fix the issue. Unfortunately it didn't resolve my issue.
Click to expand...
Accidentally on purpose? ;p

Restore your backup that you made when you first got/modded your switch.
 
  • Like
Reactions: Chaosta and poketop21
poketop21 said:
Hello I'm a noobie in the modding switch. I have a issue with my switch. I accdentally downgraded my software from version 14.1.1 to 11.0.1. After I downgraded I launch atmosphere but it only showed the atmosphere logo and then show a black screen. Do you know an solution to this problem? Your help will be greatly appreciated.(also I'm using a modded chip Nintendo switch OLED RCM patch device)

This is my Hekateipl file
[config]
autoboot=0
autoboot_list=0
bootwait=5
backlight=100
autohosoff=2
autonogc=1
bootprotect=1
updater2p=0
debugmode=1
{ }



[Custom Firmware]
fss0=atmosphere/package3
cal0blank=1
atmosphere=1
kip1=atmosphere/*
kip1patch=nosigchk
logopath=bootloader/Chuong Anh Store.bmp
icon=bootloader/res/icon_payload.bmp
{ }

[Original Firmware]
fss0=atmosphere/package3
emummc_force_disable=1
stock=1
cal0blank=0
logopath=bootloader/Original.bmp
icon=bootloader/res/icon_switch.bmp

[config]
updater2p=1
{------ Atmosphere ------}
[Atmosphere FSS0 EmuMMC]
fss0=atmosphere/package3
kip1=atmosphere/kips/*
emummcforce=1
icon=bootloader/res/emu_boot.bmp
{}
[Atmosphere FSS0 SYS]
fss0=atmosphere/package3
kip1=atmosphere/kips/*
emummc_force_disable=1
icon=bootloader/res/sys_cfw_boot.bmp
{}
{-------- Stock ---------}
[Stock SYS]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/stock_boot.bmp
Click to expand...
I have rebuild the structure nintendo switch files by using EmmcHaccGen. But there's a problem i cant launch tegraexplore payload on my oled switch. When i try to launch the payload tegraexplore it just turns the screen to black. If anyone have any advice on how to fix this issue please reply. Your help will be gratefully appreciated.
20220506_223804.jpg
 

Attachments

  • 20220506_223618.mp4
    26.8 MB
Last edited by poketop21,
  • Like
Reactions: binkinator

Site & Scene News

Go to forum More news

Popular threads in this forum

Homebrew  Full List of N64 Recompilation Switch ports

Feedback Homebrew  Essential Homebrew

Homebrew Tutorial Translation Project  CS2SX — Write Nintendo Switch Homebrew in C#

Homebrew Homebrew game Project  So... Dan didn't want to reveal his Vulkan, so I made mine.

Homebrew  Sonic Unleashed Recompiled (Homebrew Port)

running 20.5 Is it worth upgrading my firmware...?

Homebrew Homebrew game  GTA: Chinatown Wars - Switch port

Is it fixable