Hardware Components used on the Switch (mostly the motherboard and main console)

[heinrich_frei]

Hello! I need help to identify the missing capacitor near emmc. Switch Oled. Would somebody be so kind to measure the capacitor from their own switch if possible.

 

[de9ed]

Hello! I need help to identify the missing capacitor near emmc. Switch Oled. Would somebody be so kind to measure the capacitor from their own switch if possible.

I got 0.57nf in-circuit though. without taking out, how to get accurate measurement

 

[mvmiranda]

I got 0.57nf in-circuit though. without taking out, how to get accurate measurement

I'm afraid you cannot measure it accurately without removing it

 

[heinrich_frei]

I compared emmc switch 1-2V and switch oled. The number of capacitors is the same between revisions, and the arrangement according to the scheme is similar. Is it possible to replace the capacitor from the 1-2V?

 

[Ottoclav]

I compared emmc switch 1-2V and switch oled. The number of capacitors is the same between revisions, and the arrangement according to the scheme is similar. Is it possible to replace the capacitor from the 1-2V?

yyyyes? are you talking about the capacitor in the orange "circle" ? It's possible to replace most anything if you have the parts, tools and skills. the problem arises with pre-programmed chips, since they have to be programmed back at the factory, unless someone has found a software loading work-around.

 

[doom95]

Hello!
I received a Switch OLED someone tried to do the modchip install and removed the CMD resistor!

View attachment 286974
Does anyone happen to know this resistor value?

Thanks!

The missing one is 4k7 and the one next to it is 47k

 

[mvmiranda]

The missing one is 4k7 and the one next to it is 47k

Thx for the confirmation!

I had another OLED board I measured and found a value of 4.69 and harvested a 4.72 one from an old 3DS board.

Thx!

 

[kerelenko]

The missing one is 4k7 and the one next to it is 47k

I knocked the one beside the cmd resistor. Is it 47k? Do you happen to know where I can buy a replacement?

 

[studioai]

Does anyone knows this resistor's ohm? I have a wifi broken switch board.
I found out the resistor was missing due to cold joint.
I have another board but the resistor was located too narrow point.
So I desoldered the resistor from working board to measure its ohm.
and the resistor popped away when I try to measure it.
I have two wifi broken Switch and I hate 0201 components.

 

[doom95]

This side of the wifi ic is all about bluetooth. Does really not work anymore, or is bluetooth malfunctioning?
It's quite possible that wifi is not impacted by the absence of this resistor.

 

[studioai]

This side of the wifi ic is all about bluetooth. Does really not work anymore, or is bluetooth malfunctioning?
It's quite possible that wifi is not impacted by the absence of this resistor.

Is there any schematic or datasheet about this? Please let me know.
I also plan to replace BCM IC but I want to try the resistor before I do that.

 

[doom95]

They're well-hidden. I don't think we have access to reference schematics unfortunately. I will try to measure the value for you in the weekend.

 

[studioai]

They're well-hidden. I don't think we have access to reference schematics unfortunately. I will try to measure the value for you in the weekend.

Thank you for your kindless!

 

[doom95]

Does anyone knows this resistor's ohm? I have a wifi broken switch board.
I found out the resistor was missing due to cold joint.
I have another board but the resistor was located too narrow point.
So I desoldered the resistor from working board to measure its ohm.
and the resistor popped away when I try to measure it.
I have two wifi broken Switch and I hate 0201 components.

It's about 1-2 Ohms resistor. Possibly inductor.

It will be important that you have 1.2V at the marked capacitor. It is indeed a power supply line to BCM4356.

 

[Leoxama]

Anyone got an idea as to what this 3*3 BGA chip is?
Pulled from the site you see here on a HAD-CPU-01 board, and with the markings +ALJ 807
View attachment 215664

My switch has the component next to the BGA chip blown. Could you please help me identify it?

 

[doom95]

It's a 2uH inductor.

 

[WALK323]

Hello, can anyone help identify this resistor in oled switch? Thank you in advance

 

[doom95]

According to my notes it's a 4k7 resistor.

 

[Leoxama]

Anyone got an idea as to what this 3*3 BGA chip is?
Pulled from the site you see here on a HAD-CPU-01 board, and with the markings +ALJ 807
View attachment 215664

Has anyone found any info about this chip? thank you in advance

 

[studioai]

Does anyone know what this component is on HAC-CPU10 board?
Thank you in advance!