Hacking Atmosphere-NX - Custom Firmware in development by SciresM

[ShadowOne333]

So I accidentally updated my swtich to the latest firmware, and now anytime I boot My switch it just goes black screen after the initial splash screen, I updated to latest atmosphere from here https://www.sdsetup.com/ but still black screen after boot.

Does anyone know hot could I fix it?

Update from the official Release page on Github.
Delete your Atmosphere folder and drop a fresh one from the 0.19.1 release from Github.

 

[milotic]

Running the latest atmosphere on latest fw, and the first time I try and load hbmenu in high memory, it says 'software closed because an error occurred'. Only seems to happen on first launch of hbmenu. Anyone else have this issue?

I have the same issue with any game I launch first after a reboot.

 

[Superbossboo]

Yoo, booted up atmosphere on sysnand (latest firmware) to backup some saves and had this happens. Powered off and same thing in ofw. Charging it currently to see if any change occurs.

Edit: Seems like charging it fixed it. Weird bug though

Edit 2: Nope, my switch dropped from 100% to 10% within half an hour. Draining the battery to zero currently but it's lasting an awful long time while at 1%...

 

[popy]

Yoo, booted up atmosphere on sysnand (latest firmware) to backup some saves and had this happens. Powered off and same thing in ofw. Charging it currently to see if any change occurs.
View attachment 259709

Edit: Seems like charging it fixed it. Weird bug though

Edit 2: Nope, my switch dropped from 100% to 10% within half an hour. Draining the battery to zero currently but it's lasting an awful long time while at 1%...

Had the same issue twice since i have my switch.
Do you have a trinket with fusee suite installed?
If yes, run the first 3x battery fix options from the trinket heklate mod.
(the last one is "fix fuel gauge" or simmilar).
This fixed the issue for me.

Good luck

 

[Superbossboo]

Had the same issue twice since i have my switch.
Do you have a trinket with fusee suite installed?
If yes, run the first 3x battery fix options from the trinket heklate mod.
(the last one is "fix fuel gauge" or simmilar).
This fixed the issue for me.

Good luck

Nope, I don't have a trinket. I do remember people having battery issues early on though with the solution of draining the battery to zero. Thanks though.

 

[impeeza]

Yes you can read and avoid «accidents» please read the past post, they explain what to do, you must to upgrade your atmosphère, Hekate and sysmodules, I did recomend you use the oficial githubs repositories, because sdsetup could no be updated to the last.

 

[impeeza]

So I accidentally updated my swtich to the latest firmware, and now anytime I boot My switch it just goes black screen after the initial splash screen, I updated to latest atmosphere from here https://www.sdsetup.com/ but still black screen after boot.

Does anyone know hot could I fix it?

Yes you can read and avoid «accidents» please read the past post, they explain what to do, you must to upgrade your atmosphère, Hekate and sysmodules, I did recomend you use the oficial githubs repositories, because sdsetup could no be updated to the last.

--------------------- MERGED ---------------------------

Yoo, booted up atmosphere on sysnand (latest firmware) to backup some saves and had this happens. Powered off and same thing in ofw. Charging it currently to see if any change occurs.
View attachment 259709

Edit: Seems like charging it fixed it. Weird bug though

Edit 2: Nope, my switch dropped from 100% to 10% within half an hour. Draining the battery to zero currently but it's lasting an awful long time while at 1%...

You get the battery calibration data damaged, make a full charge - discharge cycles 3 o 5 times and the battery meter will be established.

 

[popy]

Nope, I don't have a trinket. I do remember people having battery issues early on though with the solution of draining the battery to zero. Thanks though.

Ok. You can avoid the time consuming recharge cycles with reprogramming the battery calibration data like I mentioned.

Sadly, I don't know if there is an stand alone payload for this.

Gesendet von meinem ONEPLUS A6013 mit Tapatalk

 

[fille]

I don't know what the problem is,but i updated from 11.0.1 to 12.0.0,updated sigpatches,and all my games doesn't start anymore,then i updated to 12.0.1,and same problem,did also a fresh sdcard setup,no emunand in use.
If you always have to reinstall all your games with an atmosphere update,then the pleasure is of.
Mario odeysee says the software was closed because an error occured.
Some games work,other not,its so strange.
I used awoo-tinwoo-goldleaf,no matter what i use,odeysee keeps getting this fucking error.
I use no cheats or whatever,just a new 512 gb sdcard formatted as exfat with sdcard formatter.
Updated sigpatches also.
I now used deepsea setup,updated sigpatches from within that program,no dice,not working.

 

[Adran_Marit]

I don't know what the problem is,but i updated from 11.0.1 to 12.0.0,updated sigpatches,and all my games doesn't start anymore,then i updated to 12.0.1,and same problem,did also a fresh sdcard setup,no emunand in use.
If you always have to reinstall all your games with an atmosphere update,then the pleasure is of.
Mario odeysee says the software was closed because an error occured.
Some games work,other not,its so strange.
I used awoo-tinwoo-goldleaf,no matter what i use,odeysee keeps getting this fucking error.
I use no cheats or whatever,just a new 512 gb sdcard formatted as exfat with sdcard formatter.
Updated sigpatches also.
I now used deepsea setup,updated sigpatches from within that program,no dice,not working.

did you update the right patches?

 

[fille]

did you update the right patches?

Right patches,how i'm supposed to now what are the right sigpatches?,to many make patches that seems to be not working,thats clear.
I tryed maybe 4 or 5 different,not working.
Formatted sdcard now,new atmosphere on it,awoo installer and total justice sigpatches.
Gona try with that.

 

[Adran_Marit]

Right patches,how i'm supposed to now what are the right sigpatches?,to many make patches that seems to be not working,thats clear.
I tryed maybe 4 or 5 different,not working.
Formatted sdcard now,new atmosphere on it,awoo installer and total justice sigpatches.
Gona try with that.

there are two different sets of patches one for fusee-primary and the other for Hekate

 

[fille]

yes,that i know,i use the 1 for fusee,now i just set up again up the sdcard,this time i used fat32,i open the localjustice sigptach updater,and its erros out,THIS is ridicilous,god,what was sxos a god gift in some situations.

 

[Adran_Marit]

yes,that i know,i use the 1 for fusee,now i just set up again up the sdcard,this time i used fat32,i open the localjustice sigptach updater,and its erros out,THIS is ridicilous,god,what was sxos a god gift in some situations.

I think the updater is broken, try these from the github instead and manually copy them over

 

[fille]

ok,thx,now i gona try to install over lan with tinwoo.
First tryed mario odeysee splitting with sak cause the filesize limit.
Copied over to sdcard,then try to install with tinwoo,nca magic error,so it stops here,no atmosphere for me.
Gona put that switch in the locker for awile,can't see it anymore.

 

[Adran_Marit]

ok,thx,now i gona try to install over lan with tinwoo.
First tryed mario odeysee splitting with sak cause the filesize limit.
Copied over to sdcard,then try to install with tinwoo,nca magic error,so it stops here,no atmosphere for me.
Gona put that switch in the locker for awile,can't see it anymore.

Did you run lockpick_rcm at all? IIRC some installers don't work properly unless it detects the prod.keys file

 

[fille]

it worked perfekt in 11.0.1,updated to 12.0.0,and the shit began.
So my point here is,update atmosphere,and the shit began,i totally don't get what could messup a full working setup by just replace or overwrite amtosphere folder and copy new sigpatches in.

 

[fille]

ok,have them,where do i put them on the sdcard?

 

[Adran_Marit]

ok,have them,where do i put them on the sdcard?

the prod.keys should be in the /switch folder on your microSD card, then try the installer again.

If that doesn't work have you tried a different installer?

 

[fille]

i gona try with awoo and tinwoo,have goldleaf also.