Hacking Sigpatches for Atmosphere (Hekate, fss0, fusee & package3)

[Ormis10]

Sorry if I’m being thick but how would I do that?

 

[Trentito89]

Remember to always disable overlays and other sysmodules after an update, guys.

How do i do that?

 

[ShadowOne333]

How do i do that?

I don't recall the exact button combo, but I think it's L+R+Dpad Down+B and you should get the overlay menu. Then, go to sysmodules, and set all of them to Off

 

[Picalo]

Hello all, just wondering if I am doing something wrong. I just updated my switch to latest firmware 11.0.1 and installed Deepsea 2.0.4 full. After booting everything seams working. I was able to install one of my nsp backup with ns-usbloader v5.0 and Tinwood. When I try to play it, I receive the "checking if the software can be played" and then I receive an error code 2137-8007. Could this be due to the sigpatshes?

I tried it with the sigpatches from Deepsea 2.0.4 - Same "checking if the software can be played"
I tried it with the main page sigpaches - "checking if the software can be played"

Any suggestions?
Thank you

 

[shim80]

Hello all, just wondering if I am doing something wrong. I just updated my switch to latest firmware 11.0.1 and installed Deepsea 2.0.4 full. After booting everything seams working. I was able to install one of my nsp backup with ns-usbloader v5.0 and Tinwood. When I try to play it, I receive the "checking if the software can be played" and then I receive an error code 2137-8007. Could this be due to the sigpatshes?

I tried it with the sigpatches from Deepsea 2.0.4 - Same "checking if the software can be played"
I tried it with the main page sigpaches - "checking if the software can be played"

Any suggestions?
Thank you

Same here. After updated to the last beta sigpatches (Atmosphere 0.18, HOS 11.0.1), I still can't lauch Mario 3D World Bowser Fury...

 

[naddel81]

Same here. After updated to the last beta sigpatches (Atmosphere 0.18, HOS 11.0.1), I still can't lauch Mario 3D World Bowser Fury...

Works Like a charm Here. Check your files or start fresh.

 

[Picalo]

Same here. After updated to the last beta sigpatches (Atmosphere 0.18, HOS 11.0.1), I still can't lauch Mario 3D World Bowser Fury...

Yeah I notice that the sigpatches only works for non Nint games (I can play Hollow knight, Ori, but not Zelda, Mario 3d or any other big Nint game).

Edit - Did not work on Street of Range 4

Works Like a charm Here. Check your files or start fresh.

Hey I did, I formatted the sd card, Installed Deepsea and nothing, then I use these files here and noting.

Can you please explain what you did to get it to work?
Thank you

 

[kubeqdf]

Hello, is this sigpatch will work with mariko sx core? I try everything, i have atmo 18, HOS 11.0.1 and its not working. I try to run Tinofil and i have error "Could not start the software". I copy all the files to sdcard, is i do something wrong? This is clean install, sd card is formatted as fat32

 

[naddel81]

Wrong patches

 

[killoblocks]

Yeah I notice that the sigpatches only works for non Nint games (I can play Hollow knight, Ori, but not Zelda, Mario 3d or any other big Nint game).

Edit - Did not work on Street of Range 4


Hey I did, I formatted the sd card, Installed Deepsea and nothing, then I use these files here and noting.

Can you please explain what you did to get it to work?
Thank you

Had the same issue. Zelda not working, and Mario 3d world. Was able to fix it by using the sigpatches in the first post, PLUS, the sigpatches from iTotalJustice (there seems to be 1 patch missing in the first post? that's what i saw when i compared the files anyway).

I'm a noob so can't post links but you can google "itotaljustice sigpatches". I downloaded the latest release (11.0.1, atm 0.18.0)

 

[Picalo]

Had the same issue. Zelda not working, and Mario 3d world. Was able to fix it by using the sigpatches in the first post, PLUS, the sigpatches from iTotalJustice (there seems to be 1 patch missing in the first post? that's what i saw when i compared the files anyway).

I'm a noob so can't post links but you can google "itotaljustice sigpatches". I downloaded the latest release (11.0.1, atm 0.18.0)

I will take a look when I get back from work on Wednesday.

 

[LyuboA]

just a suggestion seeing how lots of ppl starting to use Atmosphere coming ftom SXOS maybe you should read what sigpatches are what they are used for and how easily now you can even make them yourself

New Atmosphere version = New Loader patch 1 ips file
New Firmware version = New FS and ES patches 2 FS patches one for Fat32 and one for ExFat + 1 ES patch
those are all the files you need to run 1 Atmosphere version on 1 firmware version all other ips files are the older patches for compatibility sake for ppl using older firmware and Atmosphere versions
and since theres No other thread i will say it here for All noobs
Dont use Hekate FSS0 ie fusee-secondary
to boot use fusee-primary

 

[naddel81]

I always boot into hekate and then select "other payloads --- fusee primary". Why not?

 

[LyuboA]

I always boot into hekate and then select "other payloads --- fusee primary". Why not?

yep this is the way to go chainload fusee-primary with hekate or just boot fusee-primary what ever you want but hekate can bypass fusee-primary since you dont know about that you dont need to worry about it

 

[Picalo]

just a suggestion seeing how lots of ppl starting to use Atmosphere coming ftom SXOS maybe you should read what sigpatches are what they are used for and how easily now you can even make them yourself

New Atmosphere version = New Loader patch 1 ips file
New Firmware version = New FS and ES patches 2 FS patches one for Fat32 and one for ExFat + 1 ES patch
those are all the files you need to run 1 Atmosphere version on 1 firmware version all other ips files are the older patches for compatibility sake for ppl using older firmware and Atmosphere versions
and since theres No other thread i will say it here for All noobs
Dont use Hekate FSS0 ie fusee-secondary
to boot use fusee-primary

I have been out of the loop for some times. The last time I updated my firmware on the switch was to install Atmosphere 0.7.5 + Kosmos sigpatches. This weekend I had some time off and I updated from 6.1.0 to 11.0.1 + Deepsea since Kosmos seams to be dead.

You mentioned
1. Dont use Hekate FSS0 ie fusee-secondary to boot use fusee-primary.
-----In the Hekate_ipl.ini the line reads
"fss0=atmosphere/fusee-secondary.bin" should I change this to fusee-primary?
2. I used the sigpatches from this thread, deepsea, iTotalJustice, and used the sigpatch update app from deepsea, but some games still don't work, am I missing something?
Atmosphere folder I have
Exefs folder
-es_patches (17 .ips)
-bootlogo (14 .ips)
-bluetooth_patches (13 .ips)

kip patches
default nogc (26 ips)
fs patches (36 ips)
loader patches (18 ips)

 

[Anxiety_timmy]

for me these dont work ever since i updated atmosphere

 

[LyuboA]

I have been out of the loop for some times. The last time I updated my firmware on the switch was to install Atmosphere 0.7.5 + Kosmos sigpatches. This weekend I had some time off and I updated from 6.1.0 to 11.0.1 + Deepsea since Kosmos seams to be dead.

You mentioned
1. Dont use Hekate FSS0 ie fusee-secondary to boot use fusee-primary.
-----In the Hekate_ipl.ini the line reads
"fss0=atmosphere/fusee-secondary.bin" should I change this to fusee-primary?
2. I used the sigpatches from this thread, deepsea, iTotalJustice, and used the sigpatch update app from deepsea, but some games still don't work, am I missing something?
Atmosphere folder I have
Exefs folder
-es_patches (17 .ips)
-bootlogo (14 .ips)
-bluetooth_patches (13 .ips)

kip patches
default nogc (26 ips)
fs patches (36 ips)
loader patches (18 ips)

yes change

fss0=atmosphere/fusee-secondary.bin

to

payload=bootloader/payloads/fusee-primary.bin

and put fusee-primary.bin
into bootloader/payloads folder you need to update fusee payload every time you update Atmosphere
and if you have patches.ini file in bootloader folder delete it you dont need it and Tinfoil wont work with it there

for me these dont work ever since i updated atmosphere

like i said read on what patches are and what they are used for and if you use fusee-primary.bin better download the fusee.zip from "iTotalJustice github" repo

https://github.com/ITotalJustice/patches/releases

or just make the patches yourself

https://gbatemp.net/threads/info-on-sha-256-hashes-on-fs-patches.581550/page-7

Atmosphere 0.18.0 had 3 releases two silent updates every AMS update even for the same version needs new Loader patch better make them yourself or download the Always updated from iTotalJustice repo

 

[ShadowOne333]

Sorry, guys.
I didn't realize that Atmosphere 0.18.0 got a silent update.

That might be why some people were having issues with certain games.
I just updated the patches with the hotfix for Atmosphere 18.0, for both fusee and Hekate, try redownloading your patches and test your games again!

New patch is 81d1... ips

 

[Draxzelex]

@LyuboA Stop telling people to just switch from fss0 to fusee_primary. Its not addressing the actual problem.

I have been out of the loop for some times. The last time I updated my firmware on the switch was to install Atmosphere 0.7.5 + Kosmos sigpatches. This weekend I had some time off and I updated from 6.1.0 to 11.0.1 + Deepsea since Kosmos seams to be dead.

You mentioned
1. Dont use Hekate FSS0 ie fusee-secondary to boot use fusee-primary.
-----In the Hekate_ipl.ini the line reads
"fss0=atmosphere/fusee-secondary.bin" should I change this to fusee-primary?
2. I used the sigpatches from this thread, deepsea, iTotalJustice, and used the sigpatch update app from deepsea, but some games still don't work, am I missing something?
Atmosphere folder I have
Exefs folder
-es_patches (17 .ips)
-bootlogo (14 .ips)
-bluetooth_patches (13 .ips)

kip patches
default nogc (26 ips)
fs patches (36 ips)
loader patches (18 ips)

Ignore what the troll said. Just redownload the latest patches and you do NOT need to change fss0 to fusee_primary. They work completely fine on my machine.

 

[ShadowOne333]

@LyuboA Stop telling people to just switch from fss0 to fusee_primary. Its not addressing the actual problem.
Ignore what the troll said. Just redownload the latest patches and you do NOT need to change fss0 to fusee_primary. They work completely fine on my machine.

I forgot to reply to the whole primary/secondary thing lol.

It doesn't matter if you use primary or secondary, the patches should work for BOTH.
I use secondary myself, and I don't have any issues with any of my games.
Make sure you guys update to the latest sigpatches pack, primary and secondary should be interchangeable by now.