Hacking Fusee-primary/SX Core chip

[britain4]

Hey all, running a patched V1 Switch with SX Core chip, so far have only been able to run Atmosphere on it from fusee-secondary through Hekate - fusee-primary has never worked either using the SX Gear boot.dat, through the SX Bootloader or from Hekate. Black screen every time before Nintendo logo.

Has anyone else managed to get AMS working with fusee-primary using an SX Core chip? Or if not has anyone had any luck loading it that way with the Spacecraft-NX firmware on a patched V1?

 

[GCS]

Hey all, running a patched V1 Switch with SX Core chip, so far have only been able to run Atmosphere on it from fusee-secondary through Hekate - fusee-primary has never worked either using the SX Gear boot.dat, through the SX Bootloader or from Hekate. Black screen every time before Nintendo logo.

Has anyone else managed to get AMS working with fusee-primary using an SX Core chip? Or if not has anyone had any luck loading it that way with the Spacecraft-NX firmware on a patched V1?

Afaik SX OS blocks usage of fusee-primary and only way to boot Atmosphere is using a bootloader like Hekate. Haven't tried Spacecraft-NX because it is still in 0.1.0

 

[MaxiBus]

Afaik SX OS blocks usage of fusee-primary and only way to boot Atmosphere is using a bootloader like Hekate. Haven't tried Spacecraft-NX because it is still in 0.1.0

Spacecraft-NX is working great
Since SX OS seems to be dead, its the way to go for Erista Models

 

[britain4]

I’ve just tried out Spacecraft on mine, it actually seems really solid, much faster boot than the SX firmware for me once the initial “training” process was done

Just make sure to keep your bootloader backup and FW file from the TX site in case you want to flash the original firmware back again

Now to try fusee-primary again but works great with Spacecraft + FSS0

 

[GCS]

Spacecraft-NX is working great
Since SX OS seems to be dead, its the way to go for Erista Models

If SX OS was dead then the 3.1 wouldn't be released in the first place. I still would not recommend trying the first release of Spacecraft which can have bugs. So in the end just wait for a few days for SX to get updated if you want a more stable experience.

 

[britain4]

If SX OS was dead then the 3.1 wouldn't be released in the first place. I still would not recommend trying the first release of Spacecraft which can have bugs. So in the end just wait for a few days for SX to get updated if you want a more stable experience.

If they are planning on updating SX for 11.0.1 then it's taking them a lot longer than it took to update for 11.0 which was a more major SXOS update

Still can't get fusee-primary to work even with Spacecraft-NX, either directly or through Hekate, FSS0 is still working fine though

Still everything seems to be working fine as is (inc Tinfoil and Retroarch etc). You can even still boot SXOS using the SX Loader payload with Spacecraft-NX on there and for me it’s now much faster and more reliable booting up

 

[DPyro]

Follow this to get it working.

 

[britain4]

Thanks for all the replies on here - just as an update - as promised by SciresM fusee-primary now works fine for me with Atmosphere 0.17

 

[Don Killah]

Damn, i wish i had not updated to the latest fw to install Christmas' games off the store
Now stuck to an sxos update to install my sxcore.
Hope they'll update soon.

Edit : talking about mariko.

 

[HollowGrams]

Thanks for all the replies on here - just as an update - as promised by SciresM fusee-primary now works fine for me with Atmosphere 0.17

Yeah working here Emunand. Exosphere not working. Not working when loaded from Hekate.

 

[HollowGrams]

Damn, i wish i had not updated to the latest fw to install Christmas' games off the store
Now stuck to an sxos update to install my sxcore.
Hope they'll update soon.

I just loaded atmos 17

Downgraded sysnand to 11.0 with daybreak

All good

 

[mattyxarope]

Has anyone gotten it working with SX Lite?

I get an error every time saying there isn't enough space in boot0

 

[britain4]

I’m on Erista, SX Core with Spacecraft-NX firmware, so can’t help with Mariko/Lite.

Have gone between 11.0 and 11.0.1 several times on emuNAND with Daybreak with no issues and been able to boot SX still on 11.0 either with the original chip firmware or using the SX Loader payload with Spacecraft.

Fusee-primary now works for me regardless of whether I load it directly through Spacecraft or chainload through Hekate - I believe the original SX firmware blocks fuse-primary.

Damn, i wish i had not updated to the latest fw to install Christmas' games off the store
Now stuck to an sxos update to install my sxcore.
Hope they'll update soon.

Not 100% sure this would work but you should be able to create an 11.0.1 emuNAND - boot AMS and downgrade it to 11.0 with Daybreak for use with SX. Use genuine boot from SX bootloader to get to sysNAND (will burn your fuses though).

Or just flash Spacecraft-NX and forget about SXOS

 

[HollowGrams]

I’m on Erista, SX Core with Spacecraft-NX firmware, so can’t help with Mariko/Lite.

Have gone between 11.0 and 11.0.1 several times on emuNAND with Daybreak with no issues and been able to boot SX still on 11.0 either with the original chip firmware or using the SX Loader payload with Spacecraft.

Fusee-primary now works for me regardless of whether I load it directly through Spacecraft or chainload through Hekate - I believe the original SX firmware blocks fuse-primary.



Not 100% sure this would work but you should be able to create an 11.0.1 emuNAND - boot AMS and downgrade it to 11.0 with Daybreak for use with SX. Use genuine boot from SX bootloader to get to sysNAND (will burn your fuses though).

Or just flash Spacecraft-NX and forget about SXOS

Can downgrade with atmos 17.0 sysnand. Dont need spacecraft. Just did a V2. Used SXgear and edited boot.ini to reflect fusee-primary.bin.

 

[Don Killah]

@Hologram and @britain4 :
I'm on mariko, i don't think that it's working. You guys are talking about erista switchs, right ?

 

[HollowGrams]

@Hologram and @britain4 :
I'm on mariko, i don't think that it's working. You guys are talking about erista switchs, right ?

V2 Mariko here. After sysnand downgrade chip took longer than normal to boot. After 1 boot all normal again.

 

[Don Killah]

Wow, that's impressive.

 

[GCS]

V2 Mariko here. After sysnand downgrade chip took longer than normal to boot. After 1 boot all normal again.

Downgrading SysNAND is not recommmended. You won't be able to use Genuine Boot most probably.

 

[HollowGrams]

Downgrading SysNAND is not recommmended. You won't be able to use Genuine Boot most probably.

Don't use that but everything is working. I can load ofw from tx boot menu.

 

[Don Killah]

Hold on, you mean i won't be able to boot my original games ?