Gaming Wii has no sound?

nwh212

Member
OP
Newcomer
Joined
Mar 11, 2020
Messages
6
Trophies
0
XP
80
Country
United States
I recently bought a Wii that has no sound output, so I got to work on it. I opened it up and aside from dust, the board seems fine, nothing fried or abnormal. I tested the pins of the AV out port to make sure they were continuous, and they seemed fine. I tried changing the Wii's sound settings, nothing. I tried different cables, nothing. I tried powering it from the wall and not from a surge protector, nothing. I reset the Wii, nothing. When put loudly through my amplifier, the speakers him a very low noise, of which I know is coming from the system. What is it that could have gone wrong? Is there a component that could've fried that I'm unaware of? Could someone have screwed up on custom firmware or something? What could've caused this?
 
  • Like
Reactions: bonkmaykr

V10lator

Well-Known Member
Member
Joined
Apr 21, 2019
Messages
2,656
Trophies
1
Age
36
XP
5,580
Country
Germany
I recently bought a Wii that has no sound output, so I got to work on it. I opened it up and aside from dust, the board seems fine, nothing fried or abnormal.
Try to clean the board with isoprophyl alcohol none the less. I had weird things caused by dust on other systems, so that's the first thing I do when getting my hands on a dusted system showing weird symptoms.
 

nwh212

Member
OP
Newcomer
Joined
Mar 11, 2020
Messages
6
Trophies
0
XP
80
Country
United States
Try to clean the board with isoprophyl alcohol none the less. I had weird things caused by dust on other systems, so that's the first thing I do when getting my hands on a dusted system showing weird symptoms.
I tried that, it unfortunately hasn't solved the issue. I may try it again but I doubt it'll change if it didn't work the first time.
Did you try compressed air in the RGB connections?
Yup. The port seems to be fine. In fact, there is sound coming from the Wii - cranking my amp to max volume reveals a low electrical hum that I have confirmed comes from the wii. Is it possible that something on the board blown, or the firmware is janked?
 
  • Like
Reactions: bonkmaykr

Edmonds

Member
Newcomer
Joined
Sep 28, 2020
Messages
19
Trophies
0
Age
23
XP
98
Country
United States
I tried that, it unfortunately hasn't solved the issue. I may try it again but I doubt it'll change if it didn't work the first time.

Yup. The port seems to be fine. In fact, there is sound coming from the Wii - cranking my amp to max volume reveals a low electrical hum that I have confirmed comes from the wii. Is it possible that something on the board blown, or the firmware is janked?
I imagine it would be something hardware, not software. I don't know if you can, but look into buying a new audio card
 
  • Like
Reactions: bonkmaykr

nwh212

Member
OP
Newcomer
Joined
Mar 11, 2020
Messages
6
Trophies
0
XP
80
Country
United States
It seems the suspect could be a preamp chip on the board located nearest to the AV output on the bottom side of the board. The chip reads 932 AMPAM. Anyone know where to find a replacement for this?
 
  • Like
Reactions: bonkmaykr

nwh212

Member
OP
Newcomer
Joined
Mar 11, 2020
Messages
6
Trophies
0
XP
80
Country
United States
SOLUTION HERE
I hate when threads end with no resolution, poor saps who come in later that have no idea what they're doing, have this same issue, only to turn up empty. I've fixed the Wii, it was an issue that seems far from common, and I hope nobody else ever has it.

If your sound isn't working, several things you can try before doing this are:
  • Changing sound settings between mono, stereo and surround
  • Testing the Wii on different TVs and through different AV cables
  • Testing continuity for the LR pads on the AV out port (there are Wii pinouts online that show you which ones are for audio)
If those fall short, you likely have my issue, an issue that nobody else seems to have had or documented yet. Anyways, you're going to want to test the audio preamp chip on the motherboard. It's a small 8-pin chip on the bottom side of the board. It's close to the IC audio-video chip and sits right next to the AV port. It has a unique manufacturing symbol that looks like an A or an M, and should say AMPAM on it. This image I snatched from bitbuilt shows it off better.
av_port.png

You're going to want to test the two pins of the chip above indicated in red, then the two indicated in white. If your chip is bad, you won't get any continuity or read of any kind between the pins. I found a good chip gives me ~770 on my multimeter in just plain old continuity mode. If it's bad, here's the kicker - you gotta salvage one from a donor board. I've looked extensively for replacements, I have no idea where to find any. The company, the markings, they don't lead anywhere. Ampam didn't give me any lead as to who the manufacturer is, or any similar replacement components. You're likely better off just paying the 10 bucks for a donor board, sadly. Though, if anyone finds a replacement chip, do let me know.
 

hotparm

New Member
Newbie
Joined
Aug 7, 2021
Messages
1
Trophies
0
Age
44
XP
39
Country
United States
Ampam didn't give me any lead as to who the manufacturer is, or any similar replacement components.

The logo is Microchip Technology. Also it appears different Wii revisions use different chips.
I have a Rev 01 board, the chip markings are 727 AMPAM

I checked Mouser and found part "584-OP727ARZ"
It's a 12v opamp, pinout looks like it might be right.
 
Last edited by hotparm,

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
  • SylverReZ @ SylverReZ:
    @Materia_tofu, We do learn a lot from plenty of talented individuals.
  • Materia_tofu @ Materia_tofu:
    this is true! i learned how to make soundfont remixes from a friend back in 2021
    +1
  • BakerMan @ BakerMan:
    Update on my brother: He's home now, tired and hungry, obviously, but other than that, seems to be doing fine.
    +2
  • Veho @ Veho:
    That's a relief to hear. Do you know what happened?
  • SylverReZ @ SylverReZ:
    @BakerMan, Any idea what happened? I hope that your brother's doing good.
  • BakerMan @ BakerMan:
    Well, from what I've heard from my parents, he had a seizure last night, perhaps an epileptic episode, fucking died, had a near death experience, my dad called the paramedics, they showed up, took him to the hospital, and he woke up covered in tubes, and started complaining.
  • BakerMan @ BakerMan:
    He couldn't eat until after his MRI, when he had a bomb pop.
  • BakerMan @ BakerMan:
    What matters now is that he's doing alright.
  • Veho @ Veho:
    But you still don't know what it was?
  • Veho @ Veho:
    Has he had seizures before?
  • The Real Jdbye @ The Real Jdbye:
    apparently stress can cause seizures, my brother had one during a test once
  • The Real Jdbye @ The Real Jdbye:
    never had one before that, and never had one since
  • Redleviboy123 @ Redleviboy123:
    Question about game texture chanching Do i need an own game id?
  • The Real Jdbye @ The Real Jdbye:
    @Veho for those that want to
    experience being sonic the hedgehog
  • Veho @ Veho:
    Ah, you mean
    furries.
    +1
  • The Real Jdbye @ The Real Jdbye:
    well, sonic fans are a whole separate thing from furries
  • The Real Jdbye @ The Real Jdbye:
    like bronys
  • The Real Jdbye @ The Real Jdbye:
    sonic porn is too weird even for me
  • Dumpflam @ Dumpflam:
    bruh
  • Dumpflam @ Dumpflam:
    guys how do i delete a post
  • The Real Jdbye @ The Real Jdbye:
    you don't
  • The Real Jdbye @ The Real Jdbye:
    you can report it and request deletion
  • BakerMan @ BakerMan:
    Also, no, that was his first time having a seizure, and hopefully the last
    +1
    BakerMan @ BakerMan: Also, no, that was his first time having a seizure, and hopefully the last +1