Hacking Sx Core and Sx Lite , test Units Received

[izy]

yeah modder is good

 

[shinwg]

Yeah I offer installs

https://gbatemp.net/threads/nintend...tx-sx-core-lite-trinket-m0-usa-canada.544860/

Thanks I wrote you

 

[elm]

Anyone posting video's of their "success" or "attempts" at soldering ?

 

[aymlam]

I would offer installs "UK" but im waiting me to do another sxcore install before even considering

Would you consider SX Lite? Or know anyone that does them?

 

[semzorro]

yeah playing games and homebrew works fine,nx themes works fine for what i used , tesla loaded sys info overlay module.
games loaded fine, copied saves etc

Dont delete serial in tinfoil or emunand wont boot

What else we can do now ? As I know atmosphere and other things do not work....

 

[izy]

Would you consider SX Lite? Or know anyone that does them?

not gonna lie the switch lite doesnt look hard to solder compared to the v2 mariko, its just extra solder points on board that are way easier to solder than the cpu smds literally just pads.
if was installing I would do the lite also as the difference is minimal

My current solder is 60/40 rosin but looks cold for some reason no matter what I try it's a solid connection tho heres an example.
Looks a little unclean cause I've been practicing alot on this pad but otherwise its perfect contacts


Its defo my solder though as my other solder is coming up shiny even on lower temps.

What else we can do now ? As I know atmosphere and other things do not work....

Atmosphere and payloads dont work due to needing updates. Ppsspp didnt work for me but could be my rom.

Tesla and overlays and sysmodukes worked for me fine.
Homebrew and installing nsps worked. Tinfoil works
Installing a theme with nx installer worked

 

[ChronoTrig]

Dont delete serial in tinfoil or emunand wont boot

What about incognito? Can that be used to remove serial if on V1 Patched Switch?

Atmosphere and payloads dont work due to needing updates. Ppsspp didnt work for me but could be my rom.

Can Atmosphere work with V1 Patched Switches?

Thanks.

 

[izy]

What about incognito? Can that be used to remove serial if on V1 Patched Switch?

Can Atmosphere work with V1 Patched Switches?

Thanks.

I will assume yes on both because payloads still work etc, its just v2 switches that have these issues atm

 

[aymlam]

not gonna lie the switch lite doesnt look hard to solder compared to the v2 mariko, its just extra solder points on board that are way easier to solder than the cpu smds literally just pads.
if was installing I would do the lite also as the difference

I see, thanks for the info.

 

[Astur_torque]

not gonna lie the switch lite doesnt look hard to solder compared to the v2 mariko, its just extra solder points on board that are way easier to solder than the cpu smds literally just pads.
if was installing I would do the lite also as the difference is minimal

My current solder is 60/40 rosin but looks cold for some reason no matter what I try it's a solid connection tho heres an example.
Looks a little unclean cause I've been practicing alot on this pad but otherwise its perfect contacts
View attachment 214333

Its defo my solder though as my other solder is coming up shiny even on lower temps.



Atmosphere and payloads dont work due to needing updates. Ppsspp didnt work for me but could be my rom.

Tesla and overlays and sysmodukes worked for me fine.
Homebrew and installing nsps worked. Tinfoil works
Installing a theme with nx installer worked

I'm not familiarize with this terms, sorry

First time with "suich" patched

 

[lipanz]

anybody has success only with their eyes without magnification ?

 

[Deleted User]

anybody has success only with their eyes without magnification ?

Yeah it's possible and have done one but its much easier with.

 

[Nerdtendo]

anybody has success only with their eyes without magnification ?

Just squint real hard you'll be good

 

[lipanz]

Yeah it's possible and have done one but its much easier with.

thanks.. i'm not sure how small smd size in switch. but looking at other smd's in GPU, motherboards, looks like can be done without magnification. it looks like i need to find a magnifying glass if you say much easier with it.

 

[caldeio]

Switched retailers, reason, big delay plus more money.
Ali Shipped, should be here by the estimated 7/06

I'm watching stocks for Mariko. If I can get one, I'll sell my v1 patched. Really would like the almost double battery life

 

[Juniper]

Do you guys think it would be ok to break apart the backplate? I’ve managed to remove only some of the screws. I can already half-open the backplate so im wondering if i could just tear it off when some of the screws are still in place:

the centre screw on both joycon rails
Bottom right tri wing
2 screws adjacent to the charger

halp

 

[Patison]

still not got money from xecuter-sx. sent 4 emails without reply and received no confirmation that I will be refunded. I've never had to do chargeback at the bank before. anyone who did this and managed to get money back?

Same here, still no refund. I've already contacted my bank but they are taking their time

 

[The8Darkness]

Fun fact: if you dont connect the solder points and just put on the chip you get a red light and the console just boots into ofw as usual.

Had a buddy prepare his switch before coming to me for soldering and he apparently was curios what would happen.

 

[izy]

Do you guys think it would be ok to break apart the backplate? I’ve managed to remove only some of the screws. I can already half-open the backplate so im wondering if i could just tear it off when some of the screws are still in place:

the centre screw on both joycon rails
Bottom right tri wing
2 screws adjacent to the charger

halp

you could try soldering your small screwdriver to the rail scres and centre because if your rip off your backplate the that spread of plastic its gonna be harder to remove the bits

 

[S_Sustain]

Do you guys think it would be ok to break apart the backplate? I’ve managed to remove only some of the screws. I can already half-open the backplate so im wondering if i could just tear it off when some of the screws are still in place:

the centre screw on both joycon rails
Bottom right tri wing
2 screws adjacent to the charger

halp

Have you considered trying an 'easy out/screw extractor? There's a 1.3mm one in a kit on Amazon, but you might be able to buy them separately.