Hacking [Guide] Kafluke's HardMod CBHC Unbrick guide

[SundayWarrior]

Do you have a backup of your system NAND? If not your Wii U cannot be fixed by this.

Only otp.bin needed. Without - rip wiiu

 

[Carlos_DobleC]

Do you have a backup of your system NAND? If not your Wii U cannot be fixed by this.

I have the otp.bin, just need the microsoldering work to extract the nand and inject it repaired

 

[BaamAlex]

I have the otp.bin, just need the microsoldering work to extract the nand and inject it repaired

You create a nand backup before you mod your console...

 

[SundayWarrior]

If you have otp.bin but no slc.bin = fixable. Teensy2.0++->dump bad slc.bin->cbhc remover->get back fixed nand-> profit
If cbhc remover cant find backup system.xml try my mod prog (on previos pages with manual)

 

[Carlos_DobleC]

You create a nand backup before you mod your console...

Bro, even if I had a fucking backup of the nand it wouldn't help me if I can't inject it, and for that I need soldering.
Stop commenting on when or how backups should be made, I have everything I need except microsoldering ability.

If you have otp.bin but no slc.bin = fixable. Teensy2.0++->dump bad slc.bin->cbhc remover->get back fixed nand-> profit
If cbhc remover cant find backup system.xml try my mod prog (on previos pages with manual)

I know that it can be repaired, I know how it is done and I also know your mod, but I dont know how to solder and where I live (Spain) the Wii U didnt have any success in sales to find someone to repair them.

 

[SundayWarrior]

I know that it can be repaired, I know how it is done and I also know your mod, but I dont know how to solder and where I live (Spain) the Wii U didnt have any success in sales to find someone to repair them.

Buy flux, tiny wires, teensy2.0++, soldering iron and solder.
Solder point is big, if you be careful - you can done all work yourself

 

[Leeful]

@Carlos_DobleC I completly understand what you mean. If you have no soldering experience, soldering the points on the wiiU can be very difficult.

This is what I suggest:
If you cant find anyone who specifically does WiiU repairs, try and find a local shop in your area that repairs other electronic equiptment like TV's e.t.c

Remove the WiiU board yourself, get the teensy yourself and take in some detailed pictures and detailed info of the wiring that needs to be done.
If you explain your situation to them and they understand exactly what need to be done they might do the job for you.
They might not want to do it but there is no harm in asking around. It's worth a shot if you don't want to try it yourself.

If you do want to try it yourself, here are some tips:

Make sure you use single core KYNAR wire. just search on ebay for "360 mod wire" and you will easily find some.
If you try and use regular muliti core wire you will find it more difficult.
Make sure you use some flux on the board when you are soldering, this will also make it a lot easier.
Get the finest needle tip soldering iron you can find the smaller the better and also use fine gauge solder.
Use a good magnifying glass or magnifying glasses.
Use a multimeter to test the connections.

When it comes down to the soldering itself, look online for soldering tutorials.
Before you attempt to solder to the WiiU practice first on some old electronics circuit boards first.
It can be anything. If you dont have anything around you want to sacrifice just look online for an old broken phone or something electronic thats cheap.

Good Luck.

 

[ten2029]

.

 

[SundayWarrior]

If slc in working condition - just solder teensy and restore slc.bin

 

[ten2029]

What's the difference ?
I'm looking for a way to fix bricks with Teensy ++ 2.0 but I found 2 types of soldering and I don't know which type to choose.

 

[SundayWarrior]

View attachment 182989



What's the difference ?
What methods should be used to fix bricks?

Slc.bin = wiiu

 

[ten2029]

What kind of debugging should be done?
Type 1 or Type 2

 

[SundayWarrior]

Hmm, to hard? On image all wrote - "RB2 & CE2 Used for the WiiU part of the nand"

--------------------- MERGED ---------------------------

Type 1 - naked teensy2.0++
Type 2 - used points

--------------------- MERGED ---------------------------

Lol

 

[ten2029]

Hmm, to hard? On image all wrote - "RB2 & CE2 Used for the WiiU part of the nand"

--------------------- MERGED ---------------------------

Type 1 - naked teensy2.0++
Type 2 - used points

--------------------- MERGED ---------------------------

Lol

I want to fix the cbhc brick. (error:160-0101) Should I choose Type 1 or Type 2?

I'm looking for a way to fix bricks with Teensy ++ 2.0 but I found 2 types of soldering and I don't know which type to choose.

 

[BaamAlex]

Is someone from Germany doing such a hardmod? My Wii U is not bricked. But then having such a hardmod already installed is nice. Or can you not use the Wii U if the Hardmod is installed?

 

[Palumbo90]

Hello first of all i want to thank you for your Guide, second i need to know if a Teensy 3.2 or 3.4 will also work ? I cant find the teensy++ in my Country.

 

[lucas millington]

in like 20 years if wii us are worth something ill try this thanks

 

[gorgyrip]

Hello first of all i want to thank you for your Guide, second i need to know if a Teensy 3.2 or 3.4 will also work ? I cant find the teensy++ in my Country.

you can get it from ali (it's cheaper now than a 2 years ago):
https://www.aliexpress.com/item/329...earchweb0_0,searchweb201602_,searchweb201603_

 

[WorfRB]

Hi friends.

I have here WiiU in working condition with a soft-brick (internet browser is bricked, error 155-0206). Is this the correct tutorial to fix it? The internet explorer applet where is strored? slc nand or emmc nand?

BTW, i have otp.bin

 

[BaamAlex]

Is this the correct tutorial to fix it?

Reading the title or the OP should answer your question yourself.