Homebrew Official HID to VPAD

[ACCA919]

What is the name of the menu song?

 

[PeeJay Bonobo]

What is the name of the menu song?

I still have the mp3 that I downloaded somewhere off the Internet. Thanks, @Maschell

 

[Uptightmario555]

Currently trying to use my Switch Pro Controller, and the left stick is moving on it's own. I thought it was my controller, but I tested it out on the Switch and it works perfectly fine. Any way to fix this?

Edit: Nvm, managed to fix it.

 

[ultrazonerc]

You have to put "pressed value" - "unpressed value" into the .ini
So when the byte is 0x40 without pressing anything, but turns to 0x48 when you press A, you write 0x08 into the config

I realise how long ago this comment was but it helped me heaps so just wanted to say thank you!

 

[Regend]

Does anyone knows if i could navigate through the vpadtohid menu with the D-Pad of the pro controller or Wii mote? my gamepad broke so that's not an option

 

[Deleted User]

Does anyone knows if i could navigate through the vpadtohid menu with the D-Pad of the pro controller or Wii mote? my gamepad broke so that's not an option

i think you can. with a wiimote you can use the pointe ri believe. let me try and i will tell you

 

[Regend]

i think you can. with a wiimote you can use the pointe ri believe. let me try and i will tell you

Did you managed to do it?

 

[Deleted User]

Did you managed to do it?

im about to try it

 

[MetoMeto]

i use Dualshock 2 controller. i need to fix deadzone to 30% how do i do this?

 

[Deleted User]

i use Dualshock 2 controller. i need to fix deadzone to 30% how do i do this?

--------------------- MERGED ---------------------------

yes

--------------------- MERGED ---------------------------

i use Dualshock 2 controller. i need to fix deadzone to 30% how do i do this?

what adapter are you using?

 

[emcintosh]

Currently trying to use my Switch Pro Controller, and the left stick is moving on it's own. I thought it was my controller, but I tested it out on the Switch and it works perfectly fine. Any way to fix this?

Edit: Nvm, managed to fix it.

What was the solution? I’ve had a similar problem with any adapter that spoofs a Switch controller and assumed it was a problem with the console not sending the ‘connected’ signal to the controller to start registering inputs and interpreting the controller’s initial signal as stick movement.

 

[MetoMeto]

what adapter are you using?

This one: https://i.imgur.com/tlKsTtM.jpg

I connect PlayStation 2 (DualShock2) controller to it.

On my PC, and in HID to VPAD on WiiU controller is seen as PlayStation 3 controller.

 

[MetoMeto]

I dont understand why do i have so much of these... not sure what to look:


//Thumbsticks
VPad_L_Stick_X=0x03,0x80
VPad_L_Stick_X_MinMax=0x00,0xFF
VPad_L_Stick_X_Deadzone=0x0A
//VPad_L_Stick_X_Deadzone=0x33
VPad_L_Stick_X_Invert=False
VPad_L_Stick_Y=0x04,0x80
VPad_L_Stick_Y_MinMax=0x00,0xFF
VPad_L_Stick_Y_Deadzone=0x0A
//VPad_L_Stick_Y_Deadzone=0x24
VPad_L_Stick_Y_Invert=True
VPad_R_Stick_X=0x02,0x80
VPad_R_Stick_X_MinMax=0x00,0xFF
VPad_R_Stick_X_Deadzone=0x0A
//VPad_R_Stick_X_Deadzone=0x24
VPad_R_Stick_X_Invert=False
VPad_R_Stick_Y=0x01,0x80
VPad_R_Stick_Y_MinMax=0x00,0xFF
VPad_R_Stick_Y_Deadzone=0x0A
//VPad_R_Stick_Y_Deadzone=0x26
VPad_R_Stick_Y_Invert=True
PAD_COUNT=2

Sorry, i thought post will be merged.

 

[Deleted User]

I dont understand why do i have so much of these... not sure what to look:


//Thumbsticks
VPad_L_Stick_X=0x03,0x80
VPad_L_Stick_X_MinMax=0x00,0xFF
VPad_L_Stick_X_Deadzone=0x0A
//VPad_L_Stick_X_Deadzone=0x33
VPad_L_Stick_X_Invert=False
VPad_L_Stick_Y=0x04,0x80
VPad_L_Stick_Y_MinMax=0x00,0xFF
VPad_L_Stick_Y_Deadzone=0x0A
//VPad_L_Stick_Y_Deadzone=0x24
VPad_L_Stick_Y_Invert=True
VPad_R_Stick_X=0x02,0x80
VPad_R_Stick_X_MinMax=0x00,0xFF
VPad_R_Stick_X_Deadzone=0x0A
//VPad_R_Stick_X_Deadzone=0x24
VPad_R_Stick_X_Invert=False
VPad_R_Stick_Y=0x01,0x80
VPad_R_Stick_Y_MinMax=0x00,0xFF
VPad_R_Stick_Y_Deadzone=0x0A
//VPad_R_Stick_Y_Deadzone=0x26
VPad_R_Stick_Y_Invert=True
PAD_COUNT=2

Sorry, i thought post will be merged.

What is the stick you are trying to set the dead zone to?

 

[MetoMeto]

What is the stick you are trying to set the dead zone to?

Both actually haha.

If it means anything,
On my pc in x360ce, on dolphin and other, i set up deadzone to 30% and it works great!

Also in hid test i xant see anything but hid to vpad see it and it works, but deadzone is not good....to sensitive..30% would be nice though..

 

[Deleted User]

Both actually haha.

If it means anything,
On my pc in x360ce, on dolphin and other, i set up deadzone to 30% and it works great!

Also in hid test i xant see anything but hid to vpad see it and it works, but deadzone is not good....to sensitive..30% would be nice though..

in which directions are the sticks drifting towards?

 

[MetoMeto]

in which directions are the sticks drifting towards?

ah now...well...all 4 i think...

 

[Deleted User]

ah now...well...all 4 i think...

how are they drifting in all 4 directions? could you show me a video of hidtovpad in which you connect the ds2 and the sticks drift on the profile?

 

[Narann]

Hi and first: Thanks for the hard work !

I reversed engineering the HID values of the cheap MIMD Controller Adapter for N-Switch/WII/PC USB (reference: mimd-422-1) and wanted to share:

//MIMD Controller Adapter for N-Switch/WII/PC USB (mimd-422-1)
[vid=0x0079,pid=0x1846]

PAD1_FILTER=0x00,0x04  // First, left plug is actually 0x04
PAD2_FILTER=0x00,0x03
PAD3_FILTER=0x00,0x02
PAD4_FILTER=0x00,0x01

VPAD_BUTTON_A               =   0x01,0x02  // GC A Button
VPAD_BUTTON_B               =   0x01,0x04  // GC B Button
VPAD_BUTTON_X               =   0x01,0x01  // GC X Button
VPAD_BUTTON_Y               =   0x01,0x08  // GC Y Button

VPAD_BUTTON_PLUS            =   0x02,0x02  // GC Start

VPAD_BUTTON_L               =   0x01,0x10  // GC L pushed
VPAD_BUTTON_R               =   0x01,0x20  // GC R pushed
VPAD_BUTTON_ZR              =   0x01,0x80  // GC Z

DPAD_MODE                   =   DPAD_HAT
DPAD_MASK                   =   0xF0
VPAD_BUTTON_DPAD_N          =   0x02,0x10
VPAD_BUTTON_DPAD_NE         =   0x02,0x30
VPAD_BUTTON_DPAD_E          =   0x02,0x20
VPAD_BUTTON_DPAD_SE         =   0x02,0x60
VPAD_BUTTON_DPAD_S          =   0x02,0x40
VPAD_BUTTON_DPAD_SW         =   0x02,0xC0
VPAD_BUTTON_DPAD_W          =   0x02,0x80
VPAD_BUTTON_DPAD_NW         =   0x02,0x90
VPAD_BUTTON_DPAD_Neutral    =   0x02,0x00

// GC Thumbstick
VPad_L_STICK_X=0x03,0x80
VPad_L_STICK_X_MinMax=0x00,0xFF
VPad_L_STICK_X_Invert=False

VPad_L_STICK_Y=0x04,0x80
VPad_L_STICK_Y_MinMax=0x00,0xFF
VPad_L_STICK_Y_Invert=True

// GC C-Stick
VPad_R_STICK_X=0x06,0x80
VPad_R_STICK_X_MinMax=0x00,0xFF
VPad_R_STICK_X_Invert=True

VPad_R_STICK_Y=0x05,0x80
VPad_R_STICK_Y_MinMax=0x00,0xFF
VPad_R_STICK_Y_Invert=False

PAD_COUNT=4

I played SSMB with that and everything work fine.

I realize the MinMax values out of HID for GameCube sticks are never 0x00 - 0xFF but roughly 0x16 - 0xE6. Should I use those values in MinMax or let 0x00 - 0xFF ?

In order to solve this problem properly, I wanted to check stick behavior and compare to original Wii U pad stick behavior so I need an app that "show me" the stick position (a point in a circle) so I can compare and adapte. I found HID_TEST but it doesn't show a point in a circle but simply raw values.

I didn't find any rumble example to I couldn't find a way to enable rumble. maybe it's simply not supported.

I also realize I need to have only needed config files in the wiiu/controller folder for HIDtoVPAD to detect my pads or detection simply don't work.

A big thanks in advance for your answers.

 

[MetoMeto]

how are they drifting in all 4 directions? could you show me a video of hidtovpad in which you connect the ds2 and the sticks drift on the profile?

I'm trying it now.

L stick is drifting to the Right, to sensitive to Up, Left, and i feel like its to sensitive to Down.
R stick is drifting to the Left, Up, and its to sensitive to the Right.