already did this continue receiving black screen, what side effects of formatting the nand /? is unrecoverable after formatting?
Look, I hate to break it to you. Unless you have a backup of your ORIGINAL keys, your switch is done forever.
There is no way to boot your console without matching keys to the hardware. The keys cannot be generated, created, or spoofed otherwise.
The answer is already posted, stating to rebuild the NAND with choidujour. Although, you need two things for that... your original keys, and a firmware compatible with the original keys and choidujour. Choidujoir does not work up to a certain fir ware.
Basically, get your original keys. You should have made a backup. There is no guide that does not say to backup. You need your original keys.
Except you can generate your biskeysLook, I hate to break it to you. Unless you have a backup of your ORIGINAL keys, your switch is done forever.
There is no way to boot your console without matching keys to the hardware. The keys cannot be generated, created, or spoofed otherwise.
The answer is already posted, stating to rebuild the NAND with choidujour. Although, you need two things for that... your original keys, and a firmware compatible with the original keys and choidujour. Choidujoir does not work up to a certain fir ware.
Basically, get your original keys. You should have made a backup. There is no guide that does not say to backup. You need your original keys.
backup of your ORIGINAL keys,
You are in trouble!! Serious one.I have no original key. I inserted any key. now when I extract it. does not work . so unfortunately I lost my keys
yes but OP replaced all his keys from a different system, and has no backup. so the keys he will generate will be that of the wrong system.Except you can generate your biskeys
edit: also as long as you have your prodinfo you can recover from anything
Can you even replace the keys stored in the console? I didn't think that was possible, thought they were hardcoded onto the CPU.I have no original key. I inserted any key. now when I extract it. does not work . so unfortunately I lost my keys
Let me understand what you did. You already extracted the firmware for choi PC or those are the keys that you are looking for? If this is what you are looking for so you can follow the choi nand rebuild guide then PM me I will upload an extracted firm so you can use it Or I can give remote support as well
Can you even replace the keys stored in the console? I didn't think that was possible, thought they were hardcoded onto the CPU.
Pretty sure you just need your tsec key and sbk to generate bis keys, which are literally impossible to replaceyes but OP replaced all his keys from a different system, and has no backup. so the keys he will generate will be that of the wrong system.
that's correct they're generated from hardware info you can't changePretty sure you just need your tsec key and sbk to generate bis keys, which are literally impossible to replace
So is their any formula you can make to recreate your biskeys so you can then make a "clean" image and reinstall?that's correct they're generated from hardware info you can't change
Yes ofc the keys are in the hw itself. I thought biskeydump worked based off the NAND to pull keys from prodinfo/(f), rather than the mobo/etc.Pretty sure you just need your tsec key and sbk to generate bis keys, which are literally impossible to replace