@Reisyukaku and @EliseZeroTwo's Switch custom firmware just received an update, bringing the version counter up to 2.1! The project had already added 7.0.x compatibility in an earlier unstable build, however this is the first stable release to include it. Unlike the early build, sleep mode has also been fixed and now works fine. Other changes and improvements include JIT patches and support for exosphere/lp0fw.

The full official changelog is as follows:

• 7.0.x support
• JIT patches
• support for exo/lp0fw
• Stability™

If you are running the older unstable version, it's highly recommended you update to this newer stable release as soon as possible. As usual, a download link is available in the source down below.

Source
GBAtemp thread

 

[Cario]

Hi. Sorry i'm confused. Do i use this wtih goldleaf Nightly?
the issue i had was using Goldtree v0.3,v0.4 with goldleaf nightly, which didnt work, freezes upon choosing install and will force you to restart the device.

 

[Dothackjhe]

Hi. Sorry i'm confused. Do i use this wtih goldleaf Nightly?
the issue i had was using Goldtree v0.3,v0.4 with goldleaf nightly, which didnt work, freezes upon choosing install and will force you to restart the device.

Use the latest nightly build.

 

[Adran_Marit]

Goldleaf Latest nightly

 

[Dothackjhe]

I need no guide! I'm going balls to the walls and booting the payload with Hekate!

Were you able to boot the latest release of ReiNX with Hekate?

 

[linuxares]

Were you able to boot the latest release of ReiNX with Hekate?

At work, need to try at home but I would be surprised if it didn't work. It's ReiNX and Hekate after all.

 

[Dothackjhe]

At work, need to try at home but I would be surprised if it didn't work. It's ReiNX and Hekate after all.

I think Hekate needs updating for ReiNX 2.1. I tried using Hekate as my dongle's bootloader, it showed an error. It would not get past the ReiNX splash screen.

 

[lordelan]

Does this still overwrite Atmo's sept (payload) so I can't have both CFW at the same time (using Argon NX) without compiling things by myself?

 

[Adran_Marit]

Does this still overwrite Atmo's sept (payload) so I can't have both CFW at the same time (using Argon NX) without compiling things by myself?

Yes, it still does, so you will still need to manage by yourself.

Were you able to boot the latest release of ReiNX with Hekate?

4.9 works with 2.1 reinx

 

[Dothackjhe]

4.9 works with 2.1 reinx

I was using Hekate 4.9.1.

 

[RY0M43CH1Z3N]

I was using Hekate 4.9.1.

With the dongle doesn't works for me, can you let me know the instructions you follow?

 

[sTo0z]

That's kinda misleading. The installation is simple for both. The only difference is if you want to enable piracy on Atmos, you need to get the patches from a thread on this site (I'd link it, but my break's almost done). Even then, you don't have to worry about getting the patches if you just use Kosmos.

AKA extra steps...

But no, I hear you. But I still appreciate ReiNX as a drag and drop and done solution. Just for me personally, knowing everything has been prepared, that's why I continue to use it.

And sounds like Rei and co. could be up to some nice things in the future to set them apart. We'll see!

Either way, I'm glad there's several solutions out there.

 

[Adran_Marit]

I was using Hekate 4.9.1.

Hmmm and it didnt boot for you? are you sure you pointed to the new bin file?

 

[lordelan]

Yes, it still does, so you will still need to manage by yourself.

Thx. Sad to hear. Thank you, Nintendo, for giving us the need of using something like sept in the first place.

 

[redmagejosh]

Yes.

I've been using ReiNX for a while and have not been following up the scene regarding Atmosphere. What is sept?

 

[Adran_Marit]

I've been using ReiNX for a while and have not been following up the scene regarding Atmosphere. What is sept?

See this post in the thread https://gbatemp.net/threads/reinx-2-1-released.533862/page-2#post-8557248

--------------------- MERGED ---------------------------

Thx. Sad to hear. Thank you, Nintendo, for giving us the need of using something like sept in the first place.

Who knows, maybe there will be a version in the future that doesn't need it

 

[redmagejosh]

See this post in the thread https://gbatemp.net/threads/reinx-2-1-released.533862/page-2#post-8557248

--------------------- MERGED ---------------------------



Who knows, maybe there will be a version in the future that doesn't need it

Oh, that clears my doubts! Very cool and interesting! Will update my ReiNX once I get home tonight. Tnx to all the staff working on ReiNX!

 

[spotanjo3]

tried usb install. just freezes on 96-98%. when forced home, crashes system. will be forced to restart. upon booting an unidentified game will appear on dashboard.

Replace it and unzip it and ignored everything else. All you need is tinfoil.nro:

tinfoil-883e3bd.zip 2018-10-27 02:45 8.4 MB

 

[Adran_Marit]

Oh, that clears my doubts! Very cool and interesting! Will update my ReiNX once I get home tonight. Tnx to all the staff working on ReiNX!

don't forget to check the discord if you need help

 

[Dothackjhe]

With the dongle doesn't works for me, can you let me know the instructions you follow?

I also used a dongle for it. Specifically, the NS Atmosphere dongle.

Hmmm and it didnt boot for you? are you sure you pointed to the new bin file?

I think I missed that part. Even then, I do not know where in the micro-SD Card is the config for it.

 

[Cario]

Thanks for the help guys. It works fine now. Link provided by "linuxares" (https://github.com/satelliteseeker/Tinfoil/releases/tag/v0.2.1-USB-fix2) works, specifically the usb installation method.
If that doesn't work try Goldleaf Nightly, thanks to Adran_Marit for pointing that out as well.

The long wait for 7.0.x has finally ended.
Cheers!