ROM Hack my switch is dead!!!!!!!!!!!

deskria2

Member
OP
Newcomer
Joined
Jan 11, 2019
Messages
6
Trophies
0
Age
52
XP
71
Country
Spain
Well, my console does not do anything at all, it does not turn on or even try to put it on its base, only the LED on the base lights up a second and it goes off, the story is that my son updated the console when he removed the airplane mode and updated to 6.2, What did I do? so coji hecate ctker with which I had made a copy of the 3 partitions of the nam in 6.1 (before my son updated) and restore the partitions and perfect boot, 6.1 again ... until I had the brilliant idea of pressing the power button once !!!! since then I have not got anything at all. Please if anyone knows and can help me ........... Thank you in advance for your help
 

ScarletDreamz

[Debug Mode]
Member
Joined
Feb 16, 2015
Messages
3,967
Trophies
1
Location
/dev/sda1
XP
4,380
Country
United States
Well, my console does not do anything at all, it does not turn on or even try to put it on its base, only the LED on the base lights up a second and it goes off, the story is that my son updated the console when he removed the airplane mode and updated to 6.2, What did I do? so coji hecate ctker with which I had made a copy of the 3 partitions of the nam in 6.1 (before my son updated) and restore the partitions and perfect boot, 6.1 again ... until I had the brilliant idea of pressing the power button once !!!! since then I have not got anything at all. Please if anyone knows and can help me ........... Thank you in advance for your help
Canyou enter RCM?
 

thealgorithm

Well-Known Member
Member
Joined
Oct 27, 2015
Messages
393
Trophies
0
Age
48
XP
786
Country
You burned the fuse, so anything below 6.2 will not boot anymore... Thankfully you can still run payloads and boot indirectly, then update to 6.2 and keep using your cfw or boot normally
 
Last edited by thealgorithm,

thealgorithm

Well-Known Member
Member
Joined
Oct 27, 2015
Messages
393
Trophies
0
Age
48
XP
786
Country
RCM mode cannot be patched in software, and as you were able to enter RCM mode before, (via installing choidujour), its clearly a non-patched switch. Perhaps check your JIG
 

thealgorithm

Well-Known Member
Member
Joined
Oct 27, 2015
Messages
393
Trophies
0
Age
48
XP
786
Country
How can I do it if I can not enter RCM mode?
If you were able to enter RCM mode before, you will be able to enter it again. It is impossible for RCM mode to be blocked if it was working previously. Only exception to this is your pins on the joycon connector being bent/broken. If you downgraded via that choidujour, then it will by default put it in autorcm mode anyhow

You will then need to inject the payload to it then run the cfw of your choice
 

thealgorithm

Well-Known Member
Member
Joined
Oct 27, 2015
Messages
393
Trophies
0
Age
48
XP
786
Country
that's the problem I have, the console does not turn on either normal mode or RCM or nothing at all
If you downgraded to 6.1 via choidujour, then it will have activated autorcm. It will appear dead, but in reality it is in rcm mode already..... just inject the payload via your pc or phone
 

thealgorithm

Well-Known Member
Member
Joined
Oct 27, 2015
Messages
393
Trophies
0
Age
48
XP
786
Country
and if you want your switch to boot without payload, you must update back to 6.2 (as you burned the fuse already). boot to your cfw, update to 6.2, then all will be fine (and don't need to constantly use payload to boot)
 

deskria2

Member
OP
Newcomer
Joined
Jan 11, 2019
Messages
6
Trophies
0
Age
52
XP
71
Country
Spain
If you were able to enter RCM mode before, you will be able to enter it again. It is impossible for RCM mode to be blocked if it was working previously. Only exception to this is your pins on the joycon connector being bent/broken. If you downgraded via that choidujour, then it will by default put it in autorcm mode anyhow

You will then need to inject the payload to it then run the cfw of your choice

the console went into RCM mode before doing the downgrade from 6.2 to 6.1 after I did it and press the power button does not turn on anymore
 

thealgorithm

Well-Known Member
Member
Joined
Oct 27, 2015
Messages
393
Trophies
0
Age
48
XP
786
Country
The downgrade will also retain the autorcm. pressing the power button will do no good as it will not boot anything without a payload (as you burned the fuse)

There Is another possibility that your switch crashed. If this is the case, hold down the power button for a while (10 seconds+) this should then get back to rcm mode. then run the payload

If you wish to boot normally without payload. you must update back to 6.2
 
  • Like
Reactions: deskria2

Illuminaticy

Well-Known Member
Member
Joined
Oct 6, 2018
Messages
441
Trophies
0
XP
1,616
Country
United States
the console went into RCM mode before doing the downgrade from 6.2 to 6.1 after I did it and press the power button does not turn on anymore
Your switch has autoRCM on, or it is dead. That's it. Nothing else.

Try to send a payload.

See if battery is dead.

Hold power for ~20 seconds. CLICK power, try to send payload.
 
  • Like
Reactions: deskria2

The Real Jdbye

*is birb*
Member
Joined
Mar 17, 2010
Messages
23,207
Trophies
4
Location
Space
XP
13,732
Country
Norway
the console went into RCM mode before doing the downgrade from 6.2 to 6.1 after I did it and press the power button does not turn on anymore
It sounds like your console is stuck in sleep mode. Up until recently, sleep mode in 6.1 with fuses burnt to 6.2 didn't work.
All you should have to do is hold the power button down (not sure how long, try 20 seconds) and then you should be able to boot into RCM again.
 
Last edited by The Real Jdbye,
  • Like
Reactions: deskria2

lolboy

Well-Known Member
Member
Joined
Jul 16, 2009
Messages
679
Trophies
0
XP
1,981
Country
Netherlands
I can imagine how it went :rofl2:

Dad: What did you do !!!!!!!!!!!!!!!!
Son: Nothing it just turned off while I was trying to play Fortnite with Terry ( I asume his friends name is terry)
Dad: Did you update the Switch?
Son: No I swear I did not!
Dad: "Starting to rage...Mom hears sounds and stays upstairs to avoid the dad whom could transform into super saiyan at any moment"
Dad: "Suddenly remembers gbatemp and rushes to his computer and starts topic: my switch is dead!!!!!!!!!!!!"
 
Last edited by lolboy,

coffinbirth

Well-Known Member
Member
Joined
Jun 15, 2009
Messages
238
Trophies
1
XP
1,653
Country
United States
I'll point out that you need to leave your Switch on the dock for a considerable amount of time if autorcm drained your battery during all of this.
 
  • Like
Reactions: deskria2

deskria2

Member
OP
Newcomer
Joined
Jan 11, 2019
Messages
6
Trophies
0
Age
52
XP
71
Country
Spain
It sounds like your console is stuck in sleep mode. Up until recently, sleep mode in 6.1 with fuses burnt to 6.2 didn't work.
All you should have to do is hold the power button down (not sure how long, try 20 seconds) and then you should be able to boot into RCM again.

I tried to do it but it does not work. neither with 10seconds nor with 20 seconds nor with 30. from the moment I put it in sleep mode after doing the downgrade, which incidentally started well and I saw in options that it was really in 6.1, it does not work
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
  • Veho @ Veho:
    Mkay.
  • Veho @ Veho:
    I just ordered another package from China just to spite you.
  • SylverReZ @ SylverReZ:
    Communism lol
  • SylverReZ @ SylverReZ:
    OUR products
  • The Real Jdbye @ The Real Jdbye:
    @LeoTCK actually good quality products are dying out because they can't compete with dropshipped chinese crap
    +2
  • BakerMan @ BakerMan:
    @LeoTCK is your partner the sascrotch or smth?
  • Xdqwerty @ Xdqwerty:
    Good morning
  • Xdqwerty @ Xdqwerty:
    Out of nowhere I got several scars on my forearm and part of my arm and it really itches.
  • AdRoz78 @ AdRoz78:
    Hey, I bought a modchip today and it says "New 2040plus" in the top left corner. Is this a legit chip or was I scammed?
  • Veho @ Veho:
    @AdRoz78 start a thread and post a photo of the chip.
    +2
  • Xdqwerty @ Xdqwerty:
    Yawn
  • S @ salazarcosplay:
    and good morning everyone
    +1
  • K3Nv2 @ K3Nv2:
    @BakerMan, his partner is Luke
  • Sicklyboy @ Sicklyboy:
    Sup nerds
    +1
  • Flame @ Flame:
    oh hi, Sickly
  • K3Nv2 @ K3Nv2:
    Oh hi flame
  • S @ salazarcosplay:
    @K3Nv2 what was your ps4 situation
  • S @ salazarcosplay:
    did you always have a ps4 you never updated
  • S @ salazarcosplay:
    or were you able to get new ps4 tracking it \
    as soon as the hack was announced
  • S @ salazarcosplay:
    or did you have to find a used one with the lower firm ware that was not updated
  • K3Nv2 @ K3Nv2:
    I got this ps4 at launch and never updated since 9.0
  • K3Nv2 @ K3Nv2:
    You got a good chance of buying a used one and asking the seller how often they used or even ask for a Pic of fw and telling them not to update
    K3Nv2 @ K3Nv2: You got a good chance of buying a used one and asking the seller how often they used or even ask...