Hacking Question Tegra RCM GUI freezes when injecting payload

[Leobust]

First time posting here, Ive been trying to inject SX OS payload to my switch but every time It just freezes in "injecting payload". My switch is recognized as APX and I did install the driver as well. I also tried using RCM Smash but it had the same problem where it froze in injecting payload. At this point I don't know if its my Switch or PC, since I have injected the payload before but with my friends laptop and it worked fine. Please help and thank you in advanced.

 

[Leobust]

pls..help

 

[M7L7NK7]

Never heard of it happening to anyone else and it worked on your friend's pc so it's probably your pc

 

[magico29]

that happened to me many many times, just unplug your switch,restart your pc and start over,if u are runing sx os activate auto rcm.

 

[magico29]

that happened to me many many times, just unplug your switch,restart your pc and start over,if u are runing sx os activate auto rcm.

 

[Leobust]

that happened to me many many times, just unplug your switch,restart your pc and start over,if u are runing sx os activate auto rcm.

How many times have you needed to restart your PC? Im asking because lm pretty sure I restarted it and it was the same deal..also are you sure you didn't do anything else besides that?

 

[magico29]

you need to play around,sometimes tegra RCM will ask you to install the drivers even if u have them installed before. thats why i do have auto RCM on.

 

[Leobust]

you need to play around,sometimes tegra RCM will ask you to install the drivers even if u have them installed before. thats why i do have auto RCM on.

Been trying everything but its definitely my PC which is causing the problem because I just asked my friend if I could use his laptop again and I was able to inject the payload easily smh

 

[jakkal]

uninstall and reinstall .net framework

 

[Leobust]

uninstall and reinstall .net framework

No luck

 

[Ital8]

Got the same, try another USB port!

 

[magico29]

Been trying everything but its definitely my PC which is causing the problem because I just asked my friend if I could use his laptop again and I was able to inject the payload easily smh

Get another pc baby!!

 

[mcmrc1]

Paybe locked Paylaod ? Right Click - Propertys - And look if it says Locked for this PC...

Also are you using a USB3 or 2 Port ? What Windows ? Maybe install your chipset drivers/usb drivers from your mainboard....

 

[Leobust]

Paybe locked Paylaod ? Right Click - Propertys - And look if it says Locked for this PC...

Also are you using a USB3 or 2 Port ? What Windows ? Maybe install your chipset drivers/usb drivers from your mainboard....

Im using a usb3 port with windows 10

It gave me the option to "unblock" the payload so I did, I then tried to inject the payload once more still didn't work. So I restarted the computer and tried to inject again..didn't work.

 

[mcmrc1]

ok.. hmmm this is what fail0verflow means to the USB usage on their ->

he USB exploit requires a USB host. The exploit also requires using very long control transfers, which unfortunately some OSes are not happy with. You can either use vanilla Linux on a PC with an xHCI controller (USB 3.0, or any USB port on most recent systems), or a PC with an EHCI (USB 2.0) controller and this kernel patch....

So isome pcs seems to have problems... Check if you have the newest drivers from the website of your mainboard manufactur....

Also you can check on your PC BIOS if XHCI is enabled or @ smart auto config and also if EHCI hand off is disabled and enabled on xhci -> you can also test a little some settings...

 

[Leobust]

ok.. hmmm this is what fail0verflow means to the USB usage on their ->

he USB exploit requires a USB host. The exploit also requires using very long control transfers, which unfortunately some OSes are not happy with. You can either use vanilla Linux on a PC with an xHCI controller (USB 3.0, or any USB port on most recent systems), or a PC with an EHCI (USB 2.0) controller and this kernel patch....

So isome pcs seems to have problems... Check if you have the newest drivers from the website of your mainboard manufactur....

Also you can check on your PC BIOS if XHCI is enabled or @ smart auto config and also if EHCI hand off is disabled and enabled on xhci -> you can also test a little some settings...

I checked my Bios and XHCI hands-off is enabled, should I disable it? Sorry I didn't really understand the rest of what you said

 

[mcmrc1]

I checked my Bios and XHCI hands-off is enabled, should I disable it? Sorry I didn't really understand the rest of what you said

No let it enabled.

@Leobust

-> https://www.easeus.com/partition-ma...freezes-when-usb-plugged-in-windows-10-7.html
check this.

Also Win 10 has also sometimes problem with SSD hdds and freezing GUIs... i would check all hdds sdds and usbs microsds with a tool and after that deinstall all windows usb drivers and restart...

 

[hatredg0d]

Do you have an android phone you can use to inject it?

 

[AlfretXX]

Could you solve this problem? Got exactly the same one ...

 

[DilandDuck25]

I got the same problem. To fix it, I just changed the USB port. Didn't have to restart my computer.

 

[skinnyBIGGS]

Im having same issues . Now the tegra doesnt recognize the switch.. i was hahing not responding tegracrash.exe abd restarted now at the start of tryinf to get it to reconigize again im on win7 home edition