Hacking B9 1.2 ARM9 data abort error

[thest]

My 3DSLL is 4.4 with GW(414)
I had been installed A9, I can successfully boot into sys system( L + power), but when I tryed to boot with emu system( power with no other button) it had an error

then I gave up emu system and directly install B9 following this guide
https://3ds.guide/a9lh-to-b9s
And I have another error

Now I cannot enter system but only D9/godmode/SafeB9Installer/etc.
My files are latest.

My question is how can I install B9 rightly? Or how can I roll back to A9 that at least I can enter system.

I've tryed
http://gbatemp.net/threads/problem-with-boot9strap-installation.471198/#post-7320771
and a "b9s-next branch version" method, but it didn't work.

(I also wonder why my a9 emu system could have that error...)

And sorry for my bad english. Thank you guys.

 

[obito-kun]

the version your using is incompatible with your version of luma try to get the latest version

 

[linuxares]

Update your Luma to 8.0 and it will work for you again.

 

[thest]

the version your using is incompatible with your version of luma try to get the latest version

Update your Luma to 8.0 and it will work for you again.

Thank you but my Luma is already 8.0 and I don't know if there are later versions something like 8.0.x which will fix this problem?

I also tryed these option combines, not work.

 

[linuxares]

Hmm... you might be missing the firmware.bin file? I'm not sure anymore, ages ago I used Emunand.

 

[CrispyYoshi]

It could be the firmware.bin, though an even better solution to try would be to perform a ctrnand transfer to 9.2 on sysnand, and maybe even update it to 11.4: https://3ds.guide/9.2.0-ctrtransfer

Alternatively, if you haven't yet, see if you can move emunand to SysNand: https://3ds.guide/move-emunand

(imo, if you don't have any data you care about on sysnand, try "Move EmuNand" first)

EDIT: By the way, how long ago did you upgrade to b9s? Have you already tried Luma 7.1?

 

[thest]

Hmm... you might be missing the firmware.bin file? I'm not sure anymore, ages ago I used Emunand.

I checked and didn't find a firmware.bin in SD card, where can I get that and where should I put it to? Is this file requires a certain version?

It could be the firmware.bin, though an even better solution to try would be to perform a ctrnand transfer to 9.2 on sysnand, and maybe even update it to 11.4: https://3ds.guide/9.2.0-ctrtransfer

Alternatively, if you haven't yet, see if you can move emunand to SysNand: https://3ds.guide/move-emunand

(imo, if you don't have any data you care about on sysnand, try "Move EmuNand" first)

EDIT: By the way, how long ago did you upgrade to b9s? Have you already tried Luma 7.1?

Thank you, trying~
I just upgrade to b9s today directly from a9lh but without Luma7.1
I don't have data on EmuNand so I decide just upgrade to 11.4, good luck for me~

 

[thest]

It could be the firmware.bin, though an even better solution to try would be to perform a ctrnand transfer to 9.2 on sysnand, and maybe even update it to 11.4: https://3ds.guide/9.2.0-ctrtransfer

Alternatively, if you haven't yet, see if you can move emunand to SysNand: https://3ds.guide/move-emunand

(imo, if you don't have any data you care about on sysnand, try "Move EmuNand" first)

EDIT: By the way, how long ago did you upgrade to b9s? Have you already tried Luma 7.1?

It seems work, thank you guys very much!

 

[Necrogente]

That error is kinda strange, I got it when I was playing Mario 3D Land with a corruption Plugin, normally, the plugin can't crash the 3DS... Only the game