Homebrew I cant reboot my 3ds

Status
Not open for further replies.

W0lfy

Well-Known Member
OP
Newcomer
Joined
Jan 9, 2017
Messages
47
Trophies
0
Age
33
XP
71
Country
United States
I have a backup I can enter hourglass ,decrypt9 and Luma 3ds but i cant enter homemenu everytime i power on my 3ds (with sd card i get black screen and when i do it without sd card it doesnt even turn on(blue light turns on just a second then off)
 

ItsKipz

l33t hax0r
Member
Joined
Sep 9, 2016
Messages
1,930
Trophies
0
Location
The C: drive
XP
1,625
Country
United States
I have a backup I can enter hourglass ,decrypt9 and Luma 3ds but i cant enter homemenu everytime i power on my 3ds (with sd card i get black screen and when i do it without sd card it doesnt even turn on(blue light turns on just a second then off)
Are you on 2.1 or 11.2?
 

W0lfy

Well-Known Member
OP
Newcomer
Joined
Jan 9, 2017
Messages
47
Trophies
0
Age
33
XP
71
Country
United States
the backup i have is the one i get in the guide u showed me now im gonna see if i can restore from hourglass
i did what the guide said but i got into section 3 part 7 and my 3ds still doesnt work

--------------------- MERGED ---------------------------

it doesnt even turn on,it just turn the blue light for like just 1 second and off
So you booted into the ctrtransfer, rebooted, and it still doesnt work? What happens when you boot with the SD card removed?
 

Giodude

GBAtemp's official rock
Member
Joined
May 17, 2015
Messages
5,094
Trophies
1
Age
23
Location
New York
XP
2,761
Country
United States
the backup i have is the one i get in the guide u showed me now im gonna see if i can restore from hourglass


--------------------- MERGED ---------------------------

it doesnt even turn on,it just turn the blue light for like just 1 second and off
Without the sd card it's supposed to not turn on, since it cant find arm9loaderhax.bin. did you make a nand backup of 11.2 like you were supposed to?
 

ManitoCC

Active Member
Newcomer
Joined
Jan 7, 2017
Messages
39
Trophies
0
Age
44
XP
641
Country
Hi, im also having problems with my new 3dsxl after doing the 3dsguide.
After having a rought time following the guide because ive overlooked a step and then after that made a stupid decision by uptading the firmware whith a game card, but, that was past, and now i finally completed the guide and have luma and a9lh installed, along whith fbi and luma updater.

But i think that something is wrong, because i cant install any cia i got from the other site, fbi fails everytime when i try to install a cia.

And when i open luma updater and i choose to install normal version, after the install e choose to reboot and it goes to black screen.

If i power-it off and remove the sd card and turn-it on it loads but whitout fbi, homebrew or luma updater, but as soon i insert the sd card those apps appear.
Should i re-do the guide again by restoring the backup nand firmware, or there is a solution for this.
Is there other app to install cias (legit or not) on my 3ds?
Thanks
 

BL4Z3D247

GBAtemp Stoner
Member
Joined
Oct 22, 2008
Messages
1,942
Trophies
0
Age
39
Location
I'm so high, I don't even know!
XP
1,228
Country
United States
Sounds like OP didn't set up the CTR NAND side of Luma3DS(the part that allows you to boot without the SD card).
Did you do this part?

  1. Navigate to arm9loaderhax.bin, then press (A) on it and select the “Copy” option
  2. Return to the FBI main menu with (B)
  3. Select “CTR NAND”
  4. Select “<current directory>”
  5. Select the “Paste” option, then press (A) to confirm
  6. Exit with the home button
AND​
  1. Press (Start) to reboot with the SD card removed
    • Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based luma installation
  2. Use the (A) button and the D-Pad to turn on the following:
    • “Show NAND or user string in System Settings”
  3. If you are using a New 3DS, you should also enable the following:
    • “New 3DS CPU” to “Clock+L2(x)”
    • This will increase the framerate of many games, but may cause instability in others
    • If some games do not work properly, disable this option and try again
  4. Reinsert your SD card, then press Start to save and reboot!
 
Last edited by BL4Z3D247,

W0lfy

Well-Known Member
OP
Newcomer
Joined
Jan 9, 2017
Messages
47
Trophies
0
Age
33
XP
71
Country
United States
im an idiot then , bro im really regreting about all this but i need to know what to do please ! cant just i download a backup 11.2 from someone or idk please help
If you made a backup while you were on 11.2, just restore that using hourglass9. The 9.2.0 ctrtransfer is just for idiots who never made a backup.
 

KunoichiZ

Well-Known Member
Member
Joined
Mar 16, 2012
Messages
8,830
Trophies
0
Age
28
XP
4,597
Country
United States
im an idiot then , bro im really regreting about all this but i need to know what to do please ! cant just i download a backup 11.2 from someone or idk please help
No because using another person's NAND backup will brick your system.
 

naddel81

Well-Known Member
Member
Joined
Dec 14, 2009
Messages
2,548
Trophies
1
XP
3,772
Country
United States
Hi, im also having problems with my new 3dsxl after doing the 3dsguide.
After having a rought time following the guide because ive overlooked a step and then after that made a stupid decision by uptading the firmware whith a game card, but, that was past, and now i finally completed the guide and have luma and a9lh installed, along whith fbi and luma updater.

But i think that something is wrong, because i cant install any cia i got from the other site, fbi fails everytime when i try to install a cia.

And when i open luma updater and i choose to install normal version, after the install e choose to reboot and it goes to black screen.

If i power-it off and remove the sd card and turn-it on it loads but whitout fbi, homebrew or luma updater, but as soon i insert the sd card those apps appear.
Should i re-do the guide again by restoring the backup nand firmware, or there is a solution for this.
Is there other app to install cias (legit or not) on my 3ds?
Thanks

I would to the whole guide again. something went wrong.
 

xile6

Well-Known Member
Member
Joined
Jan 15, 2006
Messages
1,219
Trophies
0
XP
720
Country
United States
im an idiot then , bro im really regreting about all this but i need to know what to do please ! cant just i download a backup 11.2 from someone or idk please help

No ever 3ds is different you can only load your own backup nand.

From my understanding is you follow the guide to a T and your on 2.1 trying to boot it up so you can get the opt.bin correct??

And its not booting up. Either black screen with lights or boot and shut down?

Did you do this (taken from the guide)

"
  1. Delete the 2.1.0 ctrtransfer image .bin and .bin.sha from the /files9/ folder on your SD card
  2. Press (Start) to reboot without reinserting your SD card
    • While on 2.1.0, the device will black screen on boot if your SD card is inserted before the home menu loads
  3. Reinsert your SD card into your 3DS after the home menu loads
    • Every time the device is rebooted on 2.1.0, you will need to take out your SD card before boot and put it back in after the home menu loads
    • This will be fixed once you restore your device in the next page
    "
The initial boot of 2.1.0 can take slightly longer than a standard boot on some devices.
try that and see it if works
 

W0lfy

Well-Known Member
OP
Newcomer
Joined
Jan 9, 2017
Messages
47
Trophies
0
Age
33
XP
71
Country
United States
No ever 3ds is different you can only load your own backup nand.

From my understanding is you follow the guide to a T and your on 2.1 trying to boot it up so you can get the opt.bin correct??

And its not booting up. Either black screen with lights or boot and shut down?

Did you do this (taken from the guide)

"
  1. Delete the 2.1.0 ctrtransfer image .bin and .bin.sha from the /files9/ folder on your SD card
  2. Press (Start) to reboot without reinserting your SD card
    • While on 2.1.0, the device will black screen on boot if your SD card is inserted before the home menu loads
  3. Reinsert your SD card into your 3DS after the home menu loads
    • Every time the device is rebooted on 2.1.0, you will need to take out your SD card before boot and put it back in after the home menu loads
    • This will be fixed once you restore your device in the next page
    "
The initial boot of 2.1.0 can take slightly longer than a standard boot on some devices.
try that and see it if works
I cant boot my 3ds without sd card because it turns off fast but with sd card turns on and get a black screen
 

xile6

Well-Known Member
Member
Joined
Jan 15, 2006
Messages
1,219
Trophies
0
XP
720
Country
United States
I cant boot my 3ds without sd card because it turns off fast but with sd card turns on and get a black screen
have you remove the .bin from the /file9 folder?

then boot the 3ds and leave it on the black screen for 5mins. Get a timer
 

Giodude

GBAtemp's official rock
Member
Joined
May 17, 2015
Messages
5,094
Trophies
1
Age
23
Location
New York
XP
2,761
Country
United States
No ever 3ds is different you can only load your own backup nand.

From my understanding is you follow the guide to a T and your on 2.1 trying to boot it up so you can get the opt.bin correct??

And its not booting up. Either black screen with lights or boot and shut down?

Did you do this (taken from the guide)

"
  1. Delete the 2.1.0 ctrtransfer image .bin and .bin.sha from the /files9/ folder on your SD card
  2. Press (Start) to reboot without reinserting your SD card
    • While on 2.1.0, the device will black screen on boot if your SD card is inserted before the home menu loads
  3. Reinsert your SD card into your 3DS after the home menu loads
    • Every time the device is rebooted on 2.1.0, you will need to take out your SD card before boot and put it back in after the home menu loads
    • This will be fixed once you restore your device in the next page
    "
The initial boot of 2.1.0 can take slightly longer than a standard boot on some devices.
try that and see it if works
Disregard this step. This is only for people without a9lh on 2.1 you need to follow the 9.2 ctrnand transfer linked earlier.
 

W0lfy

Well-Known Member
OP
Newcomer
Joined
Jan 9, 2017
Messages
47
Trophies
0
Age
33
XP
71
Country
United States
Havent found put anyway to get out of this problem?
Disregard this step. This is only for people without a9lh on 2.1 you need to follow the 9.2 ctrnand transfer linked earlier.

--------------------- MERGED ---------------------------

have you remove the .bin from the /file9 folder?

then boot the 3ds and leave it on the black screen for 5mins. Get a timer
i should remove all .bin files from file9 folder?
 
Status
Not open for further replies.

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    SylverReZ @ SylverReZ: @salazarcosplay, Morning