Homebrew Official Mocha CFW - The sweet chocolate to your latte!

[Ghassen-ga]

I hope dimok works on a Mlc shrinking solution so it doesn't require us to need a 64 gb SD card anymore and make rednand accessible for more people

 

[Chimerhazzard]

I think they're dumped when the system uses them for the first time after booting up mocha so it may take a while but you can actually dump them by yourself with SEEPROM2SD and OTP2SD and inject them to your sd card with sdio manager (that's what I did and it works perfectly)

Thank you. I will try that.

 

[Elaugaufein]

I haven't been able to get Mocha to dump SEEPROM / OTP to the SD Card for RedNAND either (using an SD card without RedNAND for the initial dump) (the sd_nand_manager just says they aren't found), does anyone know the trigger for dumping ? I've tried: Booting RedNAND , Entering Settings in RedNAND, exiting settings in RedNAND, launching a WiiU game, using the Home Menu in a Wii U Game , exiting a Wii U Game, and checking the Download Management tab and none of those cause OTP / SEEPROM to be dumped.

 

[BIFFTAZ]

I haven't been able to get Mocha to dump SEEPROM / OTP to the SD Card for RedNAND either (using an SD card without RedNAND for the initial dump) (the sd_nand_manager just says they aren't found), does anyone know the trigger for dumping ? I've tried: Booting RedNAND , Entering Settings in RedNAND, exiting settings in RedNAND, launching a WiiU game, using the Home Menu in a Wii U Game , exiting a Wii U Game, and checking the Download Management tab and none of those cause OTP / SEEPROM to be dumped.

Enable "Config View Mode" <Expert>, & then enable both SEEPROM & OTP redirection within Mocha CFW's setting. To get into Mocha CFW's setting, Hold B while its launching.

 

[Elaugaufein]

Enable "Config View Mode" <Expert>, & then enable both SEEPROM & OTP redirection within Mocha CFW's setting. To get into Mocha CFW's setting, Hold B while its launching.

I already did that (in fact that's the default setting if you select RedNAND in non-expert mode). They still don't dump automatically.

 

[thaikhoa]

This is my set of images for mocha

splash screen

hbl icon

files
https://mega.nz/#!HUEGhZBA!cNnrU164C8BSQyldpwExkDJu7G1ZN51q_oq7VOpdmC0

 

[BIFFTAZ]

I already did that (in fact that's the default setting if you select RedNAND in non-expert mode). They still don't dump automatically.

Download SEEPROM2SD & OTP2SD from the appstore, They will dump them for you. Shouldnt take 2 minutes to download & dump..

 

[::Phoenix::]

Yes, it reloads Mocha, but it gets stuck, unless coldboothax option has been selected in Mocha settings.

This is my set of images for mocha

splash screen
View attachment 72084

hbl icon
View attachment 72085

files
https://mega.nz/#!aVd3kKIB!VMX4Wctkw9-ZvhmMteNFg-IJF0KWj1XiUmxasYeFGKw

You should make a pull request to dimok's repository. He was searching for some nice images.

 

[Briyoda]

I cant install systemconfigtool in redNand why? I get this error: Not a version title or game update

EDIT: Im not sure if this question belongs here so tell me if it doesn't.
I wasnt able to figure it out yet on iAqua's thread

 

[JamiePashley]

This is my set of images for mocha

splash screen
View attachment 72084

hbl icon
View attachment 72085

files
https://mega.nz/#!aVd3kKIB!VMX4Wctkw9-ZvhmMteNFg-IJF0KWj1XiUmxasYeFGKw

Very Nice! i think I'll be using this

 

[lordelan]

Okay, hopefully my last try:

 

[dimok]

Hey guys,

first of all thanks for all the great feedback and the great launch images several of you have created. I collected them all and will talk on IRC to a few people and decide then which one should be the default one.

Meanwhile a new bug was found with the initialization of SEEPROM and OTP dump on SD card where it was re-dumped to SD card on every launch of redNAND. So you basically had always the most current SEEPROM dump from the original EEPROM of the system on the SD card. I fixed that bug now and the ios crypto launch counter in the seeprom should be correctly incremented on SD card now.

I also added a new feature to mocha. Basically i combined mocha and simple sign patcher to one application but with an improvement. I found a way to setup myself own execution memory area in the running ios kernel and use that to setup the wupserver and iosuhax dev node code region and start those. Meaning now you have the really fast simple signature patcher code, which boots up really fast, with the addition of wupserver and /dev/iosuhax node .

Before I create a new release v0.2 I wanted to post an ELF on here and let you guys test it a bit more as I did not have time to do excessive tests. I did tests of the basic functionalities but not all possible GUI/Menu and other bug tests. I didn't see anything though from my other tests.

So here it is a compile build:
http://www19.zippyshare.com/v/cd2F2R8s/file.html

The sources can be found on my github.

Changelog:

- fixed bug with re-initialization of EEPROM and OTP dump on SD card
- added new feature which allows you to disable os full relaunch (only possible in combination with sysNAND, not redNAND)
- added new option which allows to return to HBL after executing the patches and not launch to System Menu (only in combination with disabled OS full relaunch)
- some clean ups

NOTE to the new feature:
The new feature to disable full OS reload behaves similar to the simple signature patcher except that it setups execution memory region from kernel for wupserver and iosuhax dev node code and starts those. So it's a fast simple signature patcher with the addition of wupserver and iosuhax dev node. Another addition to the simple sign patcher is that the patches reload themself when exiting settings. Launch image is disabled for this method though.

Please report whatever bugs you find.

Before doing an official v0.2 I also want to decide on the default launch image and add that to the sources.

 

[lordelan]

@dimok: Just in case you decide to take one of my launch images, you're free to use or even edit them as you wish.
Thanks for all your work!

 

[AmandaRose]

@dimok: Just in case you decide to take one of my launch images, you're free to use or even edit them as you wish.
Thanks for all your work!

The hot red head image provided by @lordelan has 100% got to be the default image @dimok lol

 

[Deleted member 388912]

Okay, hopefully my last try:
View attachment 72089
View attachment 72090

They are both working now. Thanks.

 

[lordelan]

They are both working now. Thanks.

Yeah so all I had to do is converting them to 16 bit instead of 24. Thanks to you and your private advice!

 

[AmandaRose]

Now can somebody pleeeeeeeeeeeesssssseeeee (@lordelan) or any other kind sole make a version of this with a Kari Byron splash screen.

 

[Deleted member 388912]

Yeah so all I had to do is converting them to 16 bit instead of 24. Thanks to you and your private advice!

 

[lordelan]

Now can somebody pleeeeeeeeeeeesssssseeeee (@lordelan) or any other kind sole make a version of this with a Kari Byron splash screen.

Umm ... it's not my kind of woman but just hand me a picture link and I try it.

Edit: How d'yer like this one (as a base)?
http://hdwallpaperbackgrounds.net/wp-content/uploads/2015/08/Kari-Byron-Bicycle-Wallpapers.jpg

or this
http://abload.de/img/imagew9s4u.jpg

 

[AmandaRose]

Umm ... it's not my kind of woman but just hand me a picture link and I try it.

Edit: How d'yer like this one (as a base)?
http://hdwallpaperbackgrounds.net/wp-content/uploads/2015/08/Kari-Byron-Bicycle-Wallpapers.jpg

or this
http://abload.de/img/imagew9s4u.jpg

Either image will do lol I will let you decide thanks.