Homebrew Update 11.1 and Homebrew

[Wojton]

Basehaxx is now working again on 11.1.0-34: https://twitter.com/MrNbaYoh/status/779819205235466243

Still has to be installed on 11.0.0-33 though.

 

[Wojton]

>My computer went nuts and quadruple posted, sorry about that, please remove this<

 

[Wojton]

>My computer went nuts and quadruple posted, sorry about that, please remove this<

 

[Wojton]

>My computer went nuts and quadruple posted, sorry about that, please remove this<

 

[Manurocker95]

It's in the root, as I had it before.
And I've tried both ids, the 45fe one gives me a corrupt save error when loading OoT. The c2fe one lets me load up the save, but as I've said, it just instantly goes to the regular menu after saying robpin ready.

I've used the PowerSave version without boot rate problems pressing A. Are you sure you installed it correctly? What firmware and 3ds model do you have? Do you have another entrypoint?

 

[Xiphiidae]

Or OOT3DHax with a Powersaves device.

And Steelhax.

It's in the root, as I had it before.
And I've tried both ids, the 45fe one gives me a corrupt save error when loading OoT. The c2fe one lets me load up the save, but as I've said, it just instantly goes to the regular menu after saying robpin ready.

Are you sure you're installing the correct save for your system version and 3DS model? What is the exact name of the file you're injecting into your cartridge? What is your 3DS model and region?

 

[KunoichiZ]

And Steelhax.


Are you sure you're installing the correct save for your system version and 3DS model? What is the exact name of the file you're injecting into your cartridge? What is your 3DS model and region?

Steelhax needs access to the Homebrew Launcher to install though.

 

[Xiphiidae]

Steelhax needs access to the Homebrew Launcher to install though.

Ah, you're right, I misread the original post.

I suppose the only 11.1 entrypoints are:
Ninjhax
Freakyhax
OoThax (requires a cartridge and either Powersaves or a <11.0 3DS with homebrew access)
Basehaxx (requires a cartridge and a <11.1 3DS with homebrew access)
Steelhax (requires it already having been installed prior to updating to 11.1 or having another entrypoint on 11.1)
Smashhax?

Does SMChax work on 11.1? Has SMD been ASLR'd?

 

[shinwg]

my 3ds xl a9hl luma I am on 11.0.33 I did do the update waiting to see if things get better
I want to know if update as right now would i b able to use ntr and homebrew

 

[Xiphiidae]

my 3ds xl a9hl luma I am on 11.0.33 I did do the update waiting to see if things get better
I want to know if update as right now would i b able to use ntr and homebrew

If you have A9LH+Luma, there're no issues with updating, but make a NAND backup beforehand, just to be safe.

 

[Wojton]

Ah, you're right, I misread the original post.

I suppose the only 11.1 entrypoints are:
Ninjhax
Freakyhax
OoThax (requires a cartridge and either Powersaves or a <11.0 3DS with homebrew access)
Basehaxx (requires a cartridge and a <11.1 3DS with homebrew access)
Steelhax (requires it already having been installed prior to updating to 11.1 or having another entrypoint on 11.1)
Smashhax?

Does SMChax work on 11.1? Has SMD been ASLR'd?

So Stickerhax is confirmed not working on 11.1? Last time I checked, it was said to be working in OP, now it's "?". Anybody can confirm whether it works or not?

 

[oiie]

Hello, I just updated my payload for homebrew launcher for 11.1 and it's not working for me. It loads normally until it gets to the red screen and then just turns black and nothing else happens. I'm using the cia 1.2 version. Can anyone help?

edit: nevermind, solved lol. Was using the boot.3dsx from luma3ds v6.2 rather than the one from smealum site.

 

[shinwg]

If you have A9LH+Luma, there're no issues with updating, but make a NAND backup beforehand, just to be safe.

i was asking if the homebrew app work good now also ntr cfw i use it cheat thanks

 

[Manurocker95]

i was asking if the homebrew app work good now also ntr cfw i use it cheat thanks

Yes, they work. For NTR you must update to the Native_firm 11.1 support version.

 

[shinwg]

Yes, they work. For NTR you must update to the Native_firm 11.1 support version.

ok thanks

 

[The Catboy]

I would also like to mention that Corbenik, SaltFW, and Puma33DS CFW, all work just fine on 11.1
As well Corbenik updated to to support 11.1 NATIVE_FIRM

 

[astrangeone]

Just used stickerhax on a stock 2ds updated to 11.1. Nicer than oothax in the fact the it seems to boot faster

 

[AbelsArk]

Is it safe to update emunand if I use Menuhax and Luma to get in?
Also I just got NTR to work on my 11.0 emunand, will it still work if I update to 11.1?

 

[walruspurr]

Steelhax needs access to the Homebrew Launcher to install though.

I have not had any luck getting steelhax to run properly. I have NinjHax as my access point but the save data keeps getting deleted as corrupt. I've tried the suggested fix on the site with no luck. All this said I definitely could be borking this somehow.

Basehaxx is now working again on 11.1.0-34: https://twitter.com/MrNbaYoh/status/779819205235466243

Still has to be installed on 11.0.0-33 though.

I got super excited at that first line and have been trying to get basehax to work on my 11.1.0.34U system. Then I read the more important info afterwards and face palmed.

 

[Manurocker95]

Is it safe to update emunand if I use Menuhax and Luma to get in?
Also I just got NTR to work on my 11.0 emunand, will it still work if I update to 11.1?

Those questions have been answered so many times. Please, next time read before asking... Yes, it's safe to update EmuNand. Be Sure you are not updating SysNand. For NTR you need to update Luma and NTR to the Native_Firm 11.1 support version. Once you do it, you can use it without problems.

Edit: I'd recommend you to install a9lh for not having the updating problem.

 

[lRyul]

Can someone help me pls how can I run homebrew? First time doing this thing

 

[DrewShiGold]

How would I go about updating my oothax payload for 11.1? I have my physical copy of oot powersaved with the 11.0, but I don't know how to go about updating the payload.

 

[Clector]

Inject the 11.1.0-34 save for your gamecard with powersave wit the saves from here: https://github.com/yellows8/oot3dhax/releases/tag/09-15-16