Try booting with no SD inserted and cross your fingers.i was doing step 9, i forgot to downgrade using rednand instead i was downgrading in my homebrew browser. right now my screen is completely black, is my 3ds bricked?
tried it. it is brickedTry booting with no SD inserted and cross your fingers.
What step of the guide were you at you wrote something to Sysnand? Like section and part?tried it. it is bricked
To be fair it does say in bold On RedNAND, try thishttps://github.com/Plailect/Guide/wiki/Part-4-(2.1.0-Downgrade)
i am at section 2 step 9.
Open PlaiSysUpdater on RedNAND
i was confused from there, i thought i can run plaisysupdater on homebrew browser
for hardmod i need to know soldering correct?? if so i have never done it myself i guess that option is out, i do have sysnand backed up. i guess my only option is 3 ??To be fair it does say in bold On RedNAND, try this
Black screen on SysNAND boot after downgrading
- Try booting with your SD card out, and then reinserting it after booting.
- Power off your 3DS by holding down the power button.
- Take out the SD card.
- Power on the 3DS.
- When the home menu appears, reinsert your SD card.
- If you have a hardmod and a NAND backup, flash the backup back to SysNAND.
- Try booting into recovery mode and updating your system.
This probably will not work for an Old 3DS downgraded to 2.1.0
This will BRICK a New 3DS downgraded to 2.1.0
- Power off your 3DS by holding down the power button.
- Hold L+R+A+Up.
- Power on the 3DS.
- If you enter safe mode, update your 3DS only if you have an entrypoint for the latest FW version and it is possible to downgrade from it and attempt the downgrade again.
Correct try option 3 if it still wont work you will need a hard mod - https://gbatemp.net/threads/list-of-hardmod-installers-by-region.414224/for hardmod i need to know soldering correct?? if so i have never done it myself i guess that option is out, i do have sysnand backed up. i guess my only option is 3 ??
If you're willing to go back to 11.0 just to save your 3DS, as it boots up hold these buttons:tried it. it is bricked
alright good news i guess. tried step 3 screen is back on. it tells me to update the system i just update it?Correct try option 3 if it still wont work you will need a hard mod - https://gbatemp.net/threads/list-of-hardmod-installers-by-region.414224/
I suggest @hundshamer or @vb_encryption_vb
For now yes you are very lucky. You can either wait for an 11.0 downgrade or get a hard mod later down the line. Glad I could help.alright good news i guess. tried step 3 screen is back on. it tells me to update the system i just update it?
Only if you want to go to 11.0 firmware. You cannot downgrade or get homebrew from therealright good news i guess. tried step 3 screen is back on. it tells me to update the system i just update it?
There are two homebrew entry points basehaxx and freakyhaxOnly if you want to go to 11.0 firmware. You cannot downgrade or get homebrew from there
Well you could always see if you boot normally but the only way to recover for sure is that system update.if i cancel system update, it will bring me back to black screen?
Also (v*)hax, humblehax (though those two games aren't available on eShop anymore) and SMChax. But yeah, freakyhax is the only primary entrypoint.There are two homebrew entry points basehaxx and freakyhax