Tutorial How to improve menuhax boot rate to nearly 100%

[Akira]

Just leave it there, It's not too big of a file anyways. But if you really want to delete it, Just make a backup of the 2 files(the one you didn't replaced) somewhere on your computer, delete it from your SD, plug it to your n3ds and if it boots menuhax to properly, then your good to go. Just remember to place it back again if something is not working. That's how I did anyways, but in my case, there are just 2 menuhax payloads.

 

[Txustra]

How do you change boot img and for which one?

 

[pbanj]

How do you change boot img and for which one?

the boot image is handled by the installer and has nothing to do with this payload

 

[andrew weeks]

My prblem is that HBL boots almost at 100%, but CFW does 50% or less

 

[NekoMichi]

My prblem is that HBL boots almost at 100%, but CFW does 50% or less

Similar situation here, the *hax loads with 100% success, it's just ReiNAND getting stuck on a black screen. Seems like this could be an issue with the CFW itself rather than the *hax?

 

[pbanj]

Similar situation here, the *hax loads with 100% success, it's just ReiNAND getting stuck on a black screen. Seems like this could be an issue with the CFW itself rather than the *hax?

Mess with the autoboot fix on ctrboot or the delay on bootctr if using one. I had this issue until I did that

 

[NekoMichi]

Mess with the autoboot fix on ctrboot or the delay on bootctr if using one. I had this issue until I did that

Which values did you test? I'm using autobootfix 2 and ReiNAND boot success rate is about 80%.

 

[pbanj]

Which values did you test? I'm using autobootfix 2 and ReiNAND boot success rate is about 80%.

I think I had it at like 120 but I also had it set to skip the menu. I'm not using ctrboot anymore though.

 

[andrew weeks]

I think I had it at like 120 but I also had it set to skip the menu. I'm not using ctrboot anymore though.

I am at 1500 ms with ctrboot

 

[cjm5]

n3ds 9.2u, went from maybe 40% bootrate to 95%. Thank you so much!

 

[Deleted User]

Im now using arm9loaderhax on my n3ds with an updated sysnand for 100% bootrates!

 

[fikatr]

really awesome you should try it guys

 

[Jair]

What's the source of this payload? Is it just an older build of the default payload? I am a little curious.
I've used both lesshax and ninjhax 2.7 with no debug colors or text (http://ihaveamac.github.io/ninjhax2.x/). Both improve boot rate to nearly 75-85% and don't have the epileptic flashing bottom screen. While this seems to have the flashing screen I would seriously consider it if the bootrate is even higher. Currently I cannot test since I won't have my 3DS for a couple of days, but if anyone has tested those payloads could share their results, that'd great.
Also, is there a version without debug colors?

 

[Salamencizer]

Nice guide, good work on this, Good Job! I used to have his before I installed arm9loaderhax.
How to get 100%, fast and silent boot rate (Brick protection comes free!!)
ARM9LOADERHAX

 

[pbanj]

What's the source of this payload? Is it just an older build of the default payload? I am a little curious.
I've used both lesshax and ninjhax 2.7 with no debug colors or text (http://ihaveamac.github.io/ninjhax2.x/). Both improve boot rate to nearly 75-85% and don't have the epileptic flashing bottom screen. While this seems to have the flashing screen I would seriously consider it if the bootrate is even higher. Currently I cannot test since I won't have my 3DS for a couple of days, but if anyone has tested those payloads could share their results, that'd great.
Also, is there a version without debug colors?

It's just an older payload

 

[Deleted User]

What's the source of this payload? Is it just an older build of the default payload? I am a little curious.
I've used both lesshax and ninjhax 2.7 with no debug colors or text (http://ihaveamac.github.io/ninjhax2.x/). Both improve boot rate to nearly 75-85% and don't have the epileptic flashing bottom screen. While this seems to have the flashing screen I would seriously consider it if the bootrate is even higher. Currently I cannot test since I won't have my 3DS for a couple of days, but if anyone has tested those payloads could share their results, that'd great.
Also, is there a version without debug colors?

Yes just an older payload. I just now found out about lesshax from this. I would be willing to bet its just this payload without the flashing screens. The screens kinda help to see if it crashes though. they are for debugging.

 

[pbanj]

Yes just an older payload. I just now found out about lesshax from this. I would be willing to bet its just this payload without the flashing screens. The screens kinda help to see if it crashes though. they are for debugging.

They are pretty much one in the same. Lesshax has a few changes but not much. I say test both and use what works best for you. I found when I still used menuhax that the 2.6 payload actually worked better.

 

[Deleted User]

They are pretty much one in the same. Lesshax has a few changes but not much. I say test both and use what works best for you. I found when I still used menuhax that the 2.6 payload actually worked better.

I mean I use a9lh but I made this guide a while back and I know many still use menuhax so I put it up on reddit again for those who may be new

 

[Salamencizer]

What's the source of this payload? Is it just an older build of the default payload? I am a little curious.
I've used both lesshax and ninjhax 2.7 with no debug colors or text (http://ihaveamac.github.io/ninjhax2.x/). Both improve boot rate to nearly 75-85% and don't have the epileptic flashing bottom screen. While this seems to have the flashing screen I would seriously consider it if the bootrate is even higher. Currently I cannot test since I won't have my 3DS for a couple of days, but if anyone has tested those payloads could share their results, that'd great.
Also, is there a version without debug colors?

Its a modified hax2.1 iirc.... duh why didnt I answer this before

 

[zekepliskin]

Easy as you like - I already have menuhax running. Download the correct version file from http://ihaveamac.github.io/ninjhax2.x/ and hex edit it to run auto.3dsx rather than boot.3dsx, upload by FTP, shutdown and run. No debug colours, loads faster, greatly reduced failure rate! Great stuff. This will tide me over until I have the time to do A9LH. Thanks everyone!