Hacking {{N3ds users ONLY}} post your results if you are going to downgrade.

Rayzark

giooig
Member
Joined
Nov 11, 2015
Messages
150
Trophies
0
Location
Roma
XP
151
Country
Italy
They probably could. I called them on this and tried to see if I could send it in but they want my damn micro sd card. I don't wanna send it in cuz I don't wanna lose my saves.
I don't want to send the sd card because i think that is illegal to downgrade using homebrew, they can call police.
 

730

Professional Shitposter
Member
Joined
Apr 2, 2015
Messages
485
Trophies
0
XP
628
Country
Argentina
Please help! I got the same problem and I tried to boot into recovery mode but can't get to it. Can u or someone help me? I got the error has occurred message.10.3 n3ds using ironhax

same thing but with menuhax.
Try booting into recovery with/without SD. Hold the recovery combination before turning the power on.
 

RaMon90

Well-Known Member
Member
Joined
Dec 3, 2013
Messages
592
Trophies
0
XP
239
Country
Italy
Patient, i havent played my o3ds with rxtools for months. People want badly use rxtools, result? Software brick or worse full brick...Wait for something better, the gateway downgrade from 9.2 to 4.5 was for me safe.
 
Last edited by RaMon90,

Yavga

Member
Newcomer
Joined
Mar 1, 2013
Messages
13
Trophies
0
XP
154
Country
Netherlands
Succesfully downgraded a limited edition (majora's mask) n3ds xl (EU) from 10.3 to 9.2
Today. Sysupdater Worked on my 3rd try without any problems.
 

730

Professional Shitposter
Member
Joined
Apr 2, 2015
Messages
485
Trophies
0
XP
628
Country
Argentina
sorry but that didn't work either. I am sol. It won't even go into recovery mode. Is it cuz I erased my Internet connection b4 tryin downgrading?
The first times I tried going to recovery on a soft brick I couldn't, then I tried again and it worked. I did have a Wi-Fi saved on all of my 3 softbricks though... But I doubt they wouldn't add a WiFi configuration thing in recovery mode.
 

Rayzark

giooig
Member
Joined
Nov 11, 2015
Messages
150
Trophies
0
Location
Roma
XP
151
Country
Italy
The first times I tried going to recovery on a soft brick I couldn't, then I tried again and it worked. I did have a Wi-Fi saved on all of my 3 softbricks though... But I doubt they wouldn't add a WiFi configuration thing in recovery mode.

I did it with and without the sd, I pressed before turning on and don't work. When I try to press the safe mode buttons, my n3ds power up for a little bit and then it power off, and then it power up ecc...

--------------------- MERGED ---------------------------

I hope you're not serious.
in the nintendo website there is wrote that you can't use external device or unofficial programms, I don't know what they can do.
 
Last edited by Rayzark,

Grink

Well-Known Member
Member
Joined
Jan 24, 2009
Messages
127
Trophies
0
Age
30
Location
trapped in a gutter
XP
352
Country
United States
Got it to work, Animal Crossing Happy Home Designer bundle USA New 3DS. Was originally on 9.8. It took about 3 or 4 tries to get the whole menu to show up.


xopjPc4


Halfway into the installation one .cia file looked like it froze during installing, then my 3DS screen changed to "An error has occured. Please hold the Power button to turn off" and i got hella scared that it failed lol.
Ended up just rebooting the 3DS like normal, it booted up surprisingly. Went to check system settings:

mzf00EJ

y3hyZ5F


Thanks for the tool. I used this sysupdater. https://www.dropbox.com/s/r4o8q9hnxta75io/sysUpdater.zip?dl=0 no ftbrony booting or anything, just the plain sysupdater app through Cubic Ninjahax.


EDIT: Okay, after that downgrade i had problems running the Gateway launcher, or rather any CFW at that. If your downgrade turns out like mine where it spits an Error out and you have to power down your system (it shows on the bottom screen i recall) then you'll have to update back up to 10.3 and try again. Some files didnt get installed and thats probably why my 3DS was acting up.

is this supposed to immediately say Arm11 Kernel Exploit upon launching?
#1: Allocating Buffers
#2: Allocating pagers
etc? it did that for me and it's not doing anything else. i'm a little worried to restart
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    Jayro @ Jayro: The phat model had amazingly loud speakers tho.