Hacking [Tutorial] How to access NNID and eShop on 9.5.0-23 Emunand

[Xenon Hacks]

Hello GBATEMP this is a quick tutorial on how to access the eShop and sign into or manage your NNID settings, but first let's get a few checks before doing anything.

Requirements
The Gateway Red card (CFW users check the notes below)
A N3DS / N3DSXL / N3DSLL
An Emunand partition with firmware 9.X.X-XX U/E/J
Dev Menu as a 3DS or CIA (The 3DS version can be found on Gateways download section)
3DSNUS - Credits to @ground
emuNAND Tool - Credits to @n1ghty
Free multi patcher - Credits to @RednaxelaNnamtra

Tutorial
Ok with that out of the way lets begin.
Open 3DNUS as an administrator and download the NVER and TIGER for your region they are as follows

Spoiler: NVER

U
Title ID: 000400DB20016302
Version: 448
E
Title ID: 000400DB20016102
Version: 448
J
Title ID: 000400DB20016202
Version: 448

Spoiler: TIGER

U
Title ID: 0004001000021900
Version: 19465
E
Title ID: 0004001000022900
Version: 19465
J
Title ID: 0004001000020900
Version: 19465

Here is an example of what you would type into 3DNUS if I were trying to download the U NVER

Spoiler: 3DNUS Example

Once you have both the NVER and TIGER CIA's inside of the 3DNUS 1.9 folder move them both to your SD card where you normally keep your CIA's

Before you install either of those CIA's Plug your MicroSD card into your PC using an adapter and open Emunand Tool then select Extract Emunand and save emuNAND.bin to your desktop this will be a backup incase the update fails and your Emunand bricks.

Spoiler: Emunand tool example

Once you have a backup simply boot into your Emunand. To confirm you are in Emunand open the rom selection menu and check the top right for Emunand if it says Sysnand do not continue as can possibly brick your N3DS.

From there open Dev Menu from either your Red card or as a CIA and install both CIA's. Once completed shutdown your N3DS and boot into Emunand did your brick? If you did simply inject your Emunand backup with emuNAND Tool and try again.

Spoofing the eShop and NNID Settings
When your Enter Emunand install Free multi patcher and run it.
Your setting in it should say
e-shop spoof - on
region patch - off
no auto download - on
then click A to save and start to apply those patches
From there simply enter the eShop like you normally would or go to your system settings and open Nintendo Network ID Settings to log into your NNID, set up a NNID, or change its settings.

Congratulations!
You did it! I hope this tutorial was easy to follow if there are any errors please point them out.

Note to CFW users - There are reports that this may work for you, if you want to try go ahead and install NVER but not TIGER. I would try using Free multi patcher first if it does not work try running the HBL CIA and use the HANS based eShop Spoofer.
HBL CIA Link (launch me from Emunand)- https://github.com/yellows8/hblauncher_loader/releases/download/v1.0/hblauncher_loader_v1.0.zip

Use FMP for NNID and HANS for eShop

People on CFW are having issues with 022-2634 so here are some probable fixes found by other members.

Didn't you format your EmuNAND and link your NNID already?
If you didn't, this is what you have to do (you wont lose anything at all):
1. Backup your EmuNAND using Emunand9 or the Emunand Tool
2. Copy your Nintendo 3DS directory from the SD card to your PC
3. Boot into EmuNAND, open System Settings and choose Format
4. Boot back into EmuNAND and go through setup
5. Go to System Settings and sign into your NNID (now it will be properly linked to the system ID)
6. Inject the previously back upped EmuNAND to your SD card
7. Move the Nintendo 3DS directory back

And there. Your NNID is now active on your system and you should no longer receive the error.

Well, What I did and worked was:

5.a. Remove menuhax from sysnand, so emunand black screen is solved.
5.b. Boot into the emunand using browserhax
5.c. Install DevMenu, FreeMultiPatcher and HBL cias using FBI already injected into the Health app.
5.d. Use DevMenu to install NVer.
5.e. Use FreeMultiPatcher to spoof eshop, save settings.
5.f. Use HBL cia to open up Homebrew list, open HANS.
5.g. Use HANS to open NNID app without firmware spoofing.
5.h. Link my NNID and celebrate!

Thank you all for your help!

For those who are getting 007-2920 download This older eShop app and follow the instructions below.

Great! Glad you were able to figure it out. Sorry if I came off as rude earlier.



Yeah, its a problem with HANS. I am including a rar file with the HANS and eShop files from before the update Smea made recently, which I just tested and allowed me to download updates from the eshop.

After downloading, delete the following files from your sd card and then copy the files in the archive over:

/3ds/hans/titles/eshop.txt
/3ds/hans/titles/ironhax.txt
/3ds/hans/hans.3dsx
/3ds/hans/hans.smdh
/3ds/hans/hans.xml
/3ds/eshop.smdh
/3ds/eshop.xml
/3ds/ironhax.sdmh
/3ds/ironhax.xml

This should allow you to download updates and probably VC games as well again. You will lose the "old version" eshop for downloading Ironfall 1.0, but from what I understand we cannot use that anyways because we are on 9.5.

--------------------- MERGED ---------------------------


It will work for all games, cia or cart.

 

[Tony_93]

I've read that CFW users can partially use this.

Have to install Nver and Cver but not Tiger, then use Hans to launch it.

 

[Xenon Hacks]

I've read that CFW users can partially use this.

Have to install Nver and Cver but not Tiger, then use Hans to launch it.

I'll add the CVER titles then maybe it will help people.

--------------------- MERGED ---------------------------

@Tony_93 Do you have a list of CVER titles the ones listed at 3dbrew appear to be wrong.

 

[Just3DS]

Thanks for making a detailed guide, going to be much easier for others to follow now.

Just sharing my experience:
1) I have all three options turned on in freemultipatcher but it still works in GW emuNAND. Everything else GW related also works fine. Only .3ds movies that you try to launch will crash after fmp.
2) You would eventually going to get update nag (once every day, when booting into GW emuNAND) despite freemultipatcher being ran even before switching on wireless.
3) If going to use NTR as CIA app, you have to first run NTR then run freemultipatcher. Doing the other way will cause NTR to throw an error when loading.
4) Trying to download an eShop game that uses newer 9.6+ crypto will result in system crash telling you to power down console.

EDIT: GW emuNAND users only need to install updated tiger and nver CIAs. Can also be installed using BBM. And of course, you also need to install freemultipatcher and run on every boot before entering eShop.

 

[Xenon Hacks]

Nvm I think I know the problem

 

[conradcervantes]

Thanks so much for this, finding all the relevant steps to get it to work via hopping from thread to thread for bits of info really got old after a while.

 

[Kibido]

So has freemultipatcher become useless now that we have this method? Can I delete it?

 

[moneychild]

Question: Will this work on 9.4 firmware or do I need to update to 9.5
Also, if gateway provides N3ds emunand for higher versions of emunand above 9.5, do I need to take special steps to remove everything I will eventually do in this tutorial.

 

[Xenon Hacks]

So has freemultipatcher become useless now that we have this method? Can I delete it?

No you still need Free multi patcher.

Question: Will this work on 9.4 firmware or do I need to update to 9.5
Also, if gateway provides N3ds emunand for higher versions of emunand above 9.5, do I need to take special steps to remove everything I will eventually do in this tutorial.

I would update to 9.5 0-23 then do this, also when and if we get a higher Emunand version like 10.3.0-28 you wont need to change anything since the nver and tiger come from 10.3.0-28 that's why when you do this Emunand will say 9.5.0-28

 

[Kibido]

Yeah it's written in the guide, I should've read it before asking. Thanks.

 

[CroCop]

Great it worked, thank you

 

[moneychild]

Once you have a backup simply boot into your Emunand. To confirm you are in Emunand open the rom selection menu and check the top right for Emunand if it says Emunand do not continue as can possibly brick your N3DS.

Is this correct? Or did you mean to say if it does not say emunand, do not continue?

 

[Xenon Hacks]

Is this correct? Or did you mean to say if it does not say emunand, do not continue?

I'll correct that bit your right if it says Emunand you can continue I worded that wrong.
Fixed it instead of typing Sysnand there I typed Emunand thanks for catching that.

 

[moneychild]

Thank you. It works.

Note: For some reason, I can't get emunand tool to work for N3ds at all

 

[Xenon Hacks]

Thank you. It works.

Note: For some reason, I can't get emunand tool to work for N3ds at all

Works fine for me try running it as an admin after you have your MSD plugged in then select extract Emunand.

 

[moneychild]

yes i did

 

[Xenon Hacks]

Also Pokemon Bank and Mii Plaza appear to be working now as well.

 

[cearp]

No you still need Free multi patcher.

EDIT: GW emuNAND users only need to install updated tiger and nver CIAs.

so i don't need to install free multi patcher?
or, what does just3ds mean by gw users only need to install those 2 cias?
what else don't we have to install?

The tiger and nver don't need updating as long as you can access eShop fine.

so you don't/some people don't need tiger and nver updated? you don't need them updated if you can access eshop fine? but how can you access eshop fine on 9.5 without them updated?
you mean, only use free multi patcher?

i thought i understood this but now it got confusing... lol

Note: For some reason, I can't get emunand tool to work for N3ds at all

use decrypt9, it can dump/restore sysnand/emunand

 

[GhostLatte]

Does this work for sysNAND on RxTools?

 

[Xenon Hacks]

Does this work for sysNAND on RxTools?

I would try it on Emunand first this works just fine on Sysnand as well using a Gateway card but it allegedly does not work on rxTools. So do you wanna be a guinea pig?