Hacking GATEWAY 3.2 ULTRA PUBLIC BETA

[tony_2018]

Yeah, its for 3.2, the 3.1.1 didn't have support for the n3ds mset exploit. Its just an alternate way to reinstall the mset exploit though.

Ok so my plan is as follows:

1. Get cubic ninja
2. transfer GW ultr update 3.1 to internal n3ds mSD card
3. do qr code trick
4. backup sysnand
5. pull mSD and transfer the sysnand backup to desktop pc for safe keeping
6. reinsert mSD in n3ds
7. qr code trick to get back into GW mode
8. format emunand, (wait, need bigger mSD card for this)
9. backup emunand to desktop pc the same way as step 5
10. Use another mSD inside n3ds the rest of the instructions
11. transfer GW ultra 3.2 to mSD on n3ds
12. boot into GW mode again using qr code trick
13. stick in red card with devmenu.3ds in the mSD (not the same as mSd in the n3ds)
14. load up gw mode, in sysnand, and boot devmenu
15. install mset cia to sysnand via old school devmenu
16. reboot and verify if I'm able to load up GW from DS Profile settings ( which I will figure out)

 

[blindseer]

Ok so my plan is as follows:

1. Get cubic ninja
2. transfer GW ultr update 3.1 to internal n3ds mSD card
3. do qr code trick
4. backup sysnand
5. pull mSD and transfer the sysnand backup to desktop pc for safe keeping
6. reinsert mSD in n3ds
7. qr code trick to get back into GW mode
8. format emunand, (wait, need bigger mSD card for this)
9. backup emunand to desktop pc the same way as step 5
10. Use another mSD inside n3ds the rest of the instructions
11. transfer GW ultra 3.2 to mSD on n3ds
12. boot into GW mode again using qr code trick
13. stick in red card with devmenu.3ds in the mSD (not the same as mSd in the n3ds)
14. load up gw mode, in sysnand, and boot devmenu
15. install mset cia to sysnand via old school devmenu
16. reboot and verify if I'm able to load up GW from DS Profile settings ( which I will figure out)

Uh that all looks like it would work, but seriously just use the 3.2 launcher, it will work with the old exploits, no need to over complicate it.

 

[DSpider]

So... how many microSD cards do you actually need then?

 

[tony_2018]

Uh that all looks like it would work, but seriously just use the 3.2 launcher, it will work with the old exploits, no need to over complicate it.

Well I haven't touched my n3ds yet and have not ran GW on it, I thought now would be a good time to put it through its cycles to get it up to speed on GW installs. Therefore no emunand no nothing.

 

[2Hack]

So... how many microSD cards do you actually need then?

just swap your gw cart one with your actual one for the initial install and you should be fine. then replace the old launcher with the new one on your old mSD.

 

[blindseer]

So... how many microSD cards do you actually need then?

Bare minimum, 2 but you need to do some swapping and data transferring, I have 4 and its just enough cards.

 

[retrospect]

Ok so my plan is as follows:

...
13. stick in red card with devmenu.3ds in the mSD (not the same as mSd in the n3ds)

13.5 Install NVRAM from Gateway Menu

14. load up gw mode, in sysnand, and boot devmenu
15. install mset cia to sysnand via old school devmenu
16. reboot and verify if I'm able to load up GW from DS Profile settings ( which I will figure out)

 

[misterb98]

Don't know if anyone has noticed this yet (didn't sift through pages), but it looks like with the downgraded MSET, you can reformat the system without unlinking your NNID or being forced to update. I just unlinked my NANDs this way.

 

[Maximilious]

Don't know if anyone has noticed this yet (didn't sift through pages), but it looks like with the downgraded MSET, you can reformat the system without unlinking your NNID or being forced to update. I just unlinked my NANDs this way.

System format doesn't force you to update... You're thinking of system transfer.

 

[gamesquest1]

Ok so my plan is as follows:

1. Get cubic ninja
2. transfer GW ultr update 3.1 to internal n3ds mSD card
3. do qr code trick
4. backup sysnand
5. pull mSD and transfer the sysnand backup to desktop pc for safe keeping
6. reinsert mSD in n3ds
7. qr code trick to get back into GW mode
8. format emunand, (wait, need bigger mSD card for this)
9. backup emunand to desktop pc the same way as step 5
10. Use another mSD inside n3ds the rest of the instructions
11. transfer GW ultra 3.2 to mSD on n3ds
12. boot into GW mode again using qr code trick
13. stick in red card with devmenu.3ds in the mSD (not the same as mSd in the n3ds)
14. load up gw mode, in sysnand, and boot devmenu
15. install mset cia to sysnand via old school devmenu
16. reboot and verify if I'm able to load up GW from DS Profile settings ( which I will figure out)

15.5 install the v0 whitelist, or flashcardtimewarp.cia so you can use the bluecard to reinstall the profile exploit should it ever go missing whatever reason, then you will no longer need CN/oot under any circumstance (unless you do something silly like re-update MSET)

 

[jimskeet2002]

Ok so my plan is as follows:

1. Get cubic ninja
2. transfer GW ultr update 3.1 to internal n3ds mSD card
3. do qr code trick
4. backup sysnand
5. pull mSD and transfer the sysnand backup to desktop pc for safe keeping
6. reinsert mSD in n3ds
7. qr code trick to get back into GW mode
8. format emunand, (wait, need bigger mSD card for this)
9. backup emunand to desktop pc the same way as step 5
10. Use another mSD inside n3ds the rest of the instructions
11. transfer GW ultra 3.2 to mSD on n3ds
12. boot into GW mode again using qr code trick
13. stick in red card with devmenu.3ds in the mSD (not the same as mSd in the n3ds)
14. load up gw mode, in sysnand, and boot devmenu
15. install mset cia to sysnand via old school devmenu
16. reboot and verify if I'm able to load up GW from DS Profile settings ( which I will figure out)

After step 9 that you backup yor emunand to you pc, format sysnand with the micro sd removed from the n3ds. An then boot you sysnand again with your microsd in the n3ds. This will create a new folder in your microsd and unlink your sysnand from emunand

 

[misterb98]

15.5 install the v0 whitelist, or flashcardtimewarp.cia so you can use the bluecard to reinstall the profile exploit should it ever go missing whatever reason, then you will no longer need CN/oot under any circumstance (unless you do something silly like re-update MSET)

I read somewhere else that N3ds doesn't support older DS white lists. If it does, where can I get a v0 whitelist? 3dsNus, or do I have to go googling?

 

[Midnight Tboy]

Hey all.

OK so its been ages since I updated my GW card.

I think I am currently on the first (or 2nd) release that introduced emunand support. Running on 4.5 uk regular 3DS XL.

So ......couple of questions.

1. Do I need to rerun the gateway blue card installer? (to get a newer version of base software installed perhaps?)
2. Will I need to wipe my SD card again? It has an Emunand on it currently, though its a way out of date version. Or does it use the old version automatically and just allow me to update that

If yes to 2, then how easy is it to backup current GW save games - my son will have a right strop if he loses his Pokemon progress

 

[CreativeMan]

I read somewhere else that N3ds doesn't support older DS white lists. If it does, where can I get a v0 whitelist? 3dsNus, or do I have to go googling?

You can google flashcardtimewarp.cia or 3DSNUS 0004800F484E4841 v0 but the former is easier to use.

 

[memomo]

Finally, got the rop installer to work with this Attached.

I can only test on USA n3ds so, EU and JPN let me know if it works for you too.

If not, please install the GW menu NVRAM installer then immediatly dump your DS profile with this app
https://gbatemp.net/threads/release-nvram-flash-manager.383838/
and send it to me (just the last 0x200 bytes of your nvram, i don't want to know your wifi password )

Anyone already test this in EUR/AU Console ?

 

[Gereirhadeigne]

Does anyone know if the MSET install doodah thingy majiggy will work with the 2ds? (I also need to ask if the 2ds is considered new/old/whatever; not old since old only applies to 3ds+3dsxl, but with everyone talking only about 3ds's and N3ds's, It begs the question, what about the 2ds?) I remember someone asked previously, but no one has answered them. Anyone with a 2ds ever test this? ;3

 

[Keylogger]

Import failed...mset_eur.cia on EUR N3ds with bluebox menu...

Any help?

 

[Alucardj77]

I have a New 3DS on 9.0.0-E sysnand, 9.5 emuNand. I did all the step, when I reboot in sysnand nothing happen on DS profil. Can someone help?

just use a second fresh formatted micro sd for the process,put on new launcher+mset of your 3ds region,at the end of all,turn off your consolle,throw out that microsd and put the one with your previous emunand and it works for sure

 

[blindseer]

Import failed...mset_eur.cia on EUR N3ds with bluebox menu...

Any help?

Use DevMenu.3ds

 

[Alucardj77]

question about this new BETA..

If i run DStwo in sysnand.. what happens? will i have to redo everything?

i have a N3DS too and a DSTWO,stay serene,nothing happens and you don't have to redo nothing,all works fine!