Hacking Atmosphere-NX - Custom Firmware in development by SciresM

[Vin_Thod]

i know this is probably about me but i can laugh to i know i am horrible about punctuation its something im still working on

hey im ok with it and im really appreciate your help.

 

[froggy55]

hey im ok with it and im really appreciate your help.

no prob i enjoy helping

 

[Moe87]

Hmm. Welp, my brain is shutting down from trying to make sense of this. I'm going to leave before I kill more of my brain cells trying to make sense of this. I'm out.

Hey, I can confirm that updated JKSV worked great and thank you very much for update. It load much fast after initial boot.

Our save community LOVE you.

At first, it was kinda awkward until I tweaked the setting to make more comfortable like I'm used to hold on button when restore, delete or overwrite to ensure that I don't make any mistake by accident.

 

[LuigiGad]

this is true i chose not to go with the kamikaze due to the risk if the dat 0 fails it can be replaced if kamikaze install goes wrong your system is toast since ive had my systems i noly had to have one fixed because of previouse install fail which was not on my guy in texas the guy that did that also setup my software and got himself canned from etsy but my guy in texas only does hardware he is the one that fix the previouse guys mess and i still went with dat 0 adapter and as you have said if it done right your good to go the issue with mine was likely because i dropped it and it disloged the adapter but im not sure any ways when i sent it to my guy i had him upgrade my mod chip from the insinct nx6 to the nx5s i still have the nx6 in my file drwares i dont know what ill do with it but who knows any ways i was just trying to explain the difference between the two methods and i saw alot of dat 0 failure hence the reason i stated it had a high failure rate but you are correct i was not taking into consideration that those all caould have been due to falty installs but id still worry about dropping the console with the dat 0 adapter just cuz if installer did not solder the bridge point and just left it as a friction hold it could come out which i think is what happened in my case

I think you made the wrong choice by not doing the kamikaze. The risk of doing it should be on the installing technician, not you. I’ve seen adapters fail after years.

 

[froggy55]

I think you made the wrong choice by not doing the kamikaze. The risk of doing it should be on the installing technician, not you. I’ve seen adapters fail after years.

if mine does fail again i may have my guy fix with kamikaze since i know he can safely do it

 

[Bigdrago]

My guy did 3 adapter and 1 kamikaze. After 6 months he had to undo the 3 first to kamikaze. Adapter never last forever with kids dropping the switch on the floor, overheating because of charging etc.

 

[benjam360]

Does anyone know anything about an updated version of Chiaki (https://git.sr.ht/~thestr4ng3r/chiaki)?

 

[Bigdrago]

Does anyone know anything about an updated version of Chiaki (https://git.sr.ht/~thestr4ng3r/chiaki)?

Last page

H

Homebrew RELEASE  Thread 'Chiaki (PS5 & PS4 remote play) homebrew'

May 7, 2020

Hello,
Chiaki is the an open source client for PS4 and PS5 remote play.
This discussion is dedicated to the switch version (chiaki.nro).
Source:

• https://git.sr.ht/~thestr4ng3r/chiaki

To contact us or for any chiaki support you may use:

• https://git.sr.ht/~thestr4ng3r/chiaki#joining-the-community-or-getting-help

On latest PS versions you need to use your PSN account ID.
Please read the instruction below to obtain your PSN account id (PS4 7.0 or greater and PS5):

• https://git.sr.ht/~thestr4ng3r/chiaki#obtaining-your-psn-accountid

For the...

• H0neyBadger
• Replies: 1,175
• Forum: Nintendo Switch

• 

 

[Zidane75]

Are you able to launch a game over Wi-Fi on 21.0.0?

 

[Badablek]

Are you able to launch a game over Wi-Fi on 21.0.0?

Post in thread 'Launch games in wifi 21.0.0'

Nov 27, 2025

https://github.com/Atmosphere-NX/Atmosphere/issues/2664
just add that line above to your atmosphere/config/system_settings.ini file and reboot, then the problem will go away.
default_auto_upload_global_setting = u8!0x0

• GoodFellas

• 

add the line.

or use linkalaho (mod) to remove and recreate a fake account


EDIT : ooops...didn't see it was your own thread
so problem already solved, obviously

 

[NeoGranzon]

Post in thread 'Launch games in wifi 21.0.0'

Nov 27, 2025

https://github.com/Atmosphere-NX/Atmosphere/issues/2664
just add that line above to your atmosphere/config/system_settings.ini file and reboot, then the problem will go away.
default_auto_upload_global_setting = u8!0x0

• GoodFellas

• 

add the line.

or use linkalaho (mod) to remove and recreate a fake account


EDIT : ooops...didn't see it was your own thread
so problem already solved, obviously

@Badablek where exactly do i put this line?
Inside system_setting_ini?

 

[Badablek]

yes, as stated by mrdude2478 if you follow the github link

https://github.com/Atmosphere-NX/Atmosphere/issues/2664#issuecomment-3570711064

 

[NeoGranzon]

yes, as stated by mrdude2478 if you follow the github link

https://github.com/Atmosphere-NX/Atmosphere/issues/2664#issuecomment-3570711064

Sorry @Badablek i read GitHub page,but don't understand where do i insert that line.

 

[josete2k]

Sorry @Badablek i read GitHub page,but don't understand where do i insert that line.

Just use the Linkalho mod... It does it for you.

Post automatically merged: Nov 28, 2025

Just use the Linkalho mod... It does it for you.

Homebrew Homebrew app  Post in thread 'sys-patch - sysmod that patches on boot'

Nov 19, 2025

too bad then, the .dat the actual information is read from is read from a system savefile .dat (as you can turn off upload/download of savegames through official settings) while most other olsc functions have their values read from the exefs itself.

Don't worry about it!!! We still can edit the config.ini




Here's the linkalho MOD from mrdude:

• josete2k

• 
• 

 

[Badablek]

Sorry @Badablek i read GitHub page,but don't understand where do i insert that line.

[olsc]

default_auto_upload_global_setting = u8!0x0

https://switchbrew.org/wiki/Switch_2:_System_Settings
(I'm not using 21.0.0)

 

[NeoGranzon]

[olsc]

default_auto_upload_global_setting = u8!0x0

https://switchbrew.org/wiki/Switch_2:_System_Settings
(I'm not using 21.0.0)

@Badablek this Is for Switch 2,i have the Switch V1(unpatched).

 

[Badablek]

yeah, because we all know that atmosphere works perfectly fine on Switch 2
HorizonOS is shared between Switch 1 and 2, so a lot of things for HOS SW2 are exactly the same on SW1. Pure logic.

(I'm not using firmware 21.x.x, but I found all the informations needed. This is not that hard...)

https://switchbrew.org/wiki/System_Settings#olsc

 

[PirceGrayson]

Does anyone know if Tomb Rider works on version 21.0.1 yet?

 

[OLineGuy]

Does anyone know if Tomb Rider works on version 21.0.1 yet?

it does

 

[LuigiGad]

it does

I knew it doesn't start with the latest atmosphere 1.10.0. Is there a way to work around this?