ROM Hack RELEASE New Super Mario Bros U Deluxe CHEAT file

[froggy55]

Thank you

Post automatically merged: Oct 15, 2025

Thank you so much...... But the code causes the game to crash is this only for a certain version or Build ID? It did work initially.... But after about 30 seconds the game crashed. Am I doing something wrong? The codes were imputed correctly. I triple checked. But the game still crashes. Good code though. And I am very thankful for you sharing it with me.

Post automatically merged: Oct 15, 2025

TID:0100EA80032EA000
BID: AEE6DCCC06D9C05B

Game version is 1.0.0.

So will it work for this one?

this code is for ver 1.0.1 and 1.0.2 also if it is crashing make sure you turn off unlimited lives before using for some reason there is a conflict with those cheats i am on console not emu but these should would work on emu as well

 

[lee101]

this code is for ver 1.0.1 and 1.0.2 also if it is crashing make sure you turn off unlimited lives before using for some reason there is a conflict with those cheats i am on console not emu but these should would work on emu as well

Either way thank you

 

[froggy55]

Either way thank you

no prob i hope you get it working

 

[lee101]

no prob i hope you get it working

It still crashes even with just that one code on ... I am using Emu. On my hard modded Nintendo switch (Mod chip)..... As if I really needed to tell you that LOL. It's no big deal just would have been nice . Thank you again.. .. there are many people on here who are rude and don't want to help... . You did the total opposite.. . So thank you

 

[dsrules]

It still crashes even with just that one code on ... I am using Emu. On my hard modded Nintendo switch (Mod chip)..... As if I really needed to tell you that LOL. It's no big deal just would have been nice . Thank you again.. .. there are many people on here who are rude and don't want to help... . You did the total opposite.. . So thank you

if you are looking for cheats, most could be found by google or search the BID on the site if the cheats had been posted

 

[froggy55]

It still crashes even with just that one code on ... I am using Emu. On my hard modded Nintendo switch (Mod chip)..... As if I really needed to tell you that LOL. It's no big deal just would have been nice . Thank you again.. .. there are many people on here who are rude and don't want to help... . You did the total opposite.. . So thank you

so does the code work on your modded switch i can check the code to make sure it is the correct one there was actualy 2 codes one worked andthe other had a weird issue i dontremember what it was but im pretty sure i gave you the right one but it is for 1.01 and 1.02 i dont think it would work with the the base version of the game if you can try to update your game to 1.02 and see if it works

 

[Smoker1]

this code is for ver 1.0.1 and 1.0.2 also if it is crashing make sure you turn off unlimited lives before using for some reason there is a conflict with those cheats i am on console not emu but these should would work on emu as well

They released Patches for it? Only ever knew of the Base Version.

 

[froggy55]

They released Patches for it? Only ever knew of the Base Version.

yes they did i am on ver 1.0.2 i checked my game to make sure its on 1.0.2

 

[lee101]

so does the code work on your modded switch i can check the code to make sure it is the correct one there was actualy 2 codes one worked andthe other had a weird issue i dontremember what it was but im pretty sure i gave you the right one but it is for 1.01 and 1.02 i dont think it would work with the the base version of the game if you can try to update your game to 1.02 and see if it works

It's update to 1.02 and for some odd reason it crashes/closes. It does work.... Seemingly at first what happens is Mario Completely disappears then he eventually comes back on the screen and the code seemingly works as it allows you to shift through the power ups.... But either the game will force close/Crash or after you complete the level and start a new one it will do it then. And no other code is active just that one code..... And if I do activate ANY other code/codes it will automatically crash/close. So the code does work but it crashes every time right away or shortly after. I do appreciate you communicating back with me on this. You don't have to you are not obligated in any way. You have helped more than enough. If you like you can continue checking into this but you have already dedicated yourself more than enough.

 

[froggy55]

It's update to 1.02 and for some odd reason it crashes/closes. It does work.... Seemingly at first what happens is Mario Completely disappears then he eventually comes back on the screen and the code seemingly works as it allows you to shift through the power ups.... But either the game will force close/Crash or after you complete the level and start a new one it will do it then. And no other code is active just that one code..... And if I do activate ANY other code/codes it will automatically crash/close. So the code does work but it crashes every time right away or shortly after. I do appreciate you communicating back with me on this. You don't have to you are not obligated in any way. You have helped more than enough. If you like you can continue checking into this but you have already dedicated yourself more than enough.

so i just double checked and i did give you the correct code i tested on my switch and it worked fine i went back to my original notes that i posted awhile back on this thread and it looks like it only works on og hardware and possibly ryujinx i do remember testing with ryujinx and it did work as for the other emulators it might not due to internal code differences in the emulators i beleive the original creator of the code made it for the og hardware and riujinx and if i remember correctly the other emulators have different coding systems so i would reccomend using your modded switch to play this game with cheats or try riujinx on pc i think those are the only two ways this code works right if you want i have a complete file of variouse cheats for this game i can post if you want and it includes the powerup modifier code let me know what you think and have a good one

 

[lee101]

so i just double checked and i did give you the correct code i tested on my switch and it worked fine i went back to my original notes that i posted awhile back on this thread and it looks like it only works on og hardware and possibly ryujinx i do remember testing with ryujinx and it did work as for the other emulators it might not due to internal code differences in the emulators i beleive the original creator of the code made it for the og hardware and riujinx and if i remember correctly the other emulators have different coding systems so i would reccomend using your modded switch to play this game with cheats or try riujinx on pc i think those are the only two ways this code works right if you want i have a complete file of variouse cheats for this game i can post if you want and it includes the powerup modifier code let me know what you think and have a good one

Anything you can provide will help.... Thank you.

Post automatically merged: Oct 16, 2025

so i just double checked and i did give you the correct code i tested on my switch and it worked fine i went back to my original notes that i posted awhile back on this thread and it looks like it only works on og hardware and possibly ryujinx i do remember testing with ryujinx and it did work as for the other emulators it might not due to internal code differences in the emulators i beleive the original creator of the code made it for the og hardware and riujinx and if i remember correctly the other emulators have different coding systems so i would reccomend using your modded switch to play this game with cheats or try riujinx on pc i think those are the only two ways this code works right if you want i have a complete file of variouse cheats for this game i can post if you want and it includes the powerup modifier code let me know what you think and have a good one

I also realized a lot of the codes don't work on the current Firmware version I have that could also be the reason I am having these issues on my modded Nintendo switch. The codes worked well on Firmware 18.0.0 but when I had someone update my firmware to 20.4.0 most of the codes are no longer working for this Firmware version or at least that's what I believe because neither the moon jump (Press B) nor the invincible codes work anymore but they did previously on 18.0. and I believe possibly 19.0. again I am not sure why. I never played and switch games on ba Laptop but I guess I can try.

 

[froggy55]

Anything you can provide will help.... Thank you.

Post automatically merged: Oct 16, 2025

I also realized a lot of the codes don't work on the current Firmware version I have that could also be the reason I am having these issues on my modded Nintendo switch. The codes worked well on Firmware 18.0.0 but when I had someone update my firmware to 20.4.0 most of the codes are no longer working for this Firmware version or at least that's what I believe because neither the moon jump (Press B) nor the invincible codes work anymore but they did previously on 18.0. and I believe possibly 19.0. again I am not sure why. I never played and switch games on ba Laptop but I guess I can try.

the codes are not affected by the fw but they are affected by the version of atmosphere make sure you are running atmosphere 1.9.5 i am running fw 20.50 and evrything works fine for me you also need to make sure you have the latest syspatch and the latest lockpick rcm and extract the latest keys most codes now only work with atmosphere 1.8.0 plus i hope this helps and i will upload my cheat file later today

 

[lee101]

the codes are not affected by the fw but they are affected by the version of atmosphere make sure you are running atmosphere 1.9.5 i am running fw 20.50 and evrything works fine for me you also need to make sure you have the latest syspatch and the latest lockpick rcm and extract the latest keys most codes now only work with atmosphere 1.8.0 plus i hope this helps and i will upload my cheat file later today

It's currently on 1.9.4lE. Lockpick rcm I know nothing about.. LOL.... And definitely not about extracting Keys.... The person Who I had doing my updates is no longer in the business of doing so..... He lives an hour away from me and is very hard to get a hold of.... Unfortunately there does not seem to be anyone nearby where I live that can actually do this. I live in Dayton Ohio area (USA) and I am limited to this area.... Unfortunately. I have tried to update my Nintendo switch myself and Screwed it up..... I am stupid when it comes to doing even the simplist of things especially dealing with updating the Nintendo switch..... My hardest issue was finding the latest compatible version of sygnapatches or sigpatches I think I got that right. But I sure wish I had your knowledge and expertise. I have not the slightest idea what to do with what you mentioned. My Nintendo switch is Hard Modded with a mod chip

 

[froggy55]

It's currently on 1.9.4lE. Lockpick rcm I know nothing about.. LOL.... And definitely not about extracting Keys.... The person Who I had doing my updates is no longer in the business of doing so..... He lives an hour away from me and is very hard to get a hold of.... Unfortunately there does not seem to be anyone nearby where I live that can actually do this. I live in Dayton Ohio area (USA) and I am limited to this area.... Unfortunately. I have tried to update my Nintendo switch myself and Screwed it up..... I am stupid when it comes to doing even the simplist of things especially dealing with updating the Nintendo switch..... My hardest issue was finding the latest compatible version of sygnapatches or sigpatches I think I got that right. But I sure wish I had your knowledge and expertise. I have not the slightest idea what to do with what you mentioned. My Nintendo switch is Hard Modded with a mod chip

here is all the files you need and i am going to give you a step by step guide so you can update your system
so here is step 1 power down your switch and remove the sd card insert the sd card into your pc download the atmosphere 1.9.5 master that i provided extract to a folder on your desktiop once extracted you will see 2 folders 1 named atmosphere and the other named bootloader you will also see a file named hbmenu.nro drag and drop all of these to the root directory of your switch select replace files when prompt comes up once this is done we move to step 2
so here is step 2 download the hekate+ams package 3 zip also provided here and extract it to a folder on your desktop once it is extracted you will again see the 2 folders atmosphere and bootloader again drag and drop these folders to the root directory of your sd card again select replace files you now have your sig patches now on to step 3

step 3 download sys patch 1.5.6 provided here extract to its own folder then again you will see the atmosphere folder and bootloader folder drag and drop to your root directory of your sd card and again select replace files
you have now updated your sys patch module now on to step 4

step 4 download mission control provided below this is to allow native support for most bluetooth controllers extract to its own folder and again you will see the atmosphere folder but this time with a folder called config again drag and drop these folders to your root directory of your sd card now you have updated your mission control now on to step 5

step 5 download fuse.zip provided here extract to its own folder then copy to this file path on your sd card the first folder is bootloader once in this folder select the payloads folder it is in this folder you paste the fuse.bin file after pasting replace file promt will come up select to replace the file you have now updated your fusee,bin which is required for atmosphere now on to step 6

step 6 updating lock pick rcm download the lockpick rcm provided here extract to its own folder and copy the lockpickrcm.bin to the payloads folder that you were just in once this is done you will see again the prompt to relace file go ahead and select it once the process is done we move to step 7

step 7 go to this site https://github.com/THZoria/NX_Firmware/releases and download the 20.50 firmware for your switch once downloaded extract to its own folder and name the folder firmware 20.50 once done copy this folder to the root of your sd card you will need it later once this is done we move to step 8

step 8 put your sd card back in your switch i am assuming you have an emunand that you boot from but for now you need to boot into stock mode from hekate so when you power on your switch it should boot into hekate once there select launch and select your stock mode once your switch is booted into stock mode go to settings then system and select update system once it finshes updating it will reboot once more boot back into stock mode to make sure everthing worked once you confirm you have updated your stock partition we will move to step 9

step 9 restart your switch and boot to hekate which should be automatic once back in hekate select payloads then select lockpick rcm it will boot into the lockpick rcm once there turn your switch side ways so you can properly read the menu move up and down using the vol + and - buttons on your switch scroll down to dump keys from sysnand press the power button to select once you select it will automaticaly dump the keys you need when it finishes it will say press any button to go back to previouse menu press the power button then at main menu scroll down and select dump amiibo keys once you select it it will auto dump then press any button to go back to main menu at this point you can scroll down and select reboot to hekate once there we go to step 10

step 10 ok so we are now back in hekate if you are running your prated games through an emunand which i recomend because otherwise you will get banned select launch and select emmumc you will now boot into your switch with atmosphere once your switch has booted we can do the last step to updating your system so we go to step 11

step 11 what i want you to do in this step is launch a game well holding down the right button on your switch this should take you to the homebrew menu once there search for and select the app daybreak once daybreak launches it will take you to a prompt that says install or exit select install this will now take you to the root directory of your sd card scroll down and select the frimware 20.50 folder that we put there earlier once selected it will automaticaly validate then select continue you will next see a prompt that sys reset to factory settings and preserve settings i want you to select preserve settings it will then take you to the next prompt saying install fat32 or inststall fat32+exfat you want to select install fat32+ exfat once you select this you will receive a prompt that says ready to begin update select continue and the update should install once it finishes you will recieve a prompt to reboot the system select reboot your system you will now be booted back to hekate in hekate select launch and select emmumc from here you will bott back to your switch emunand at the nintendo switch logo it might take some extra time so just be pationt and it will launch your system once it does congratulations you have fully updated your system i hope this helps you and that it is written in a way that you can easly follow if you have any more questions please dont hesitate to ask

 

[lee101]

here is all the files you need and i am going to give you a step by step guide so you can update your system
so here is step 1 power down your switch and remove the sd card insert the sd card into your pc download the atmosphere 1.9.5 master that i provided extract to a folder on your desktiop once extracted you will see 2 folders 1 named atmosphere and the other named bootloader you will also see a file named hbmenu.nro drag and drop all of these to the root directory of your switch select replace files when prompt comes up once this is done we move to step 2
so here is step 2 download the hekate+ams package 3 zip also provided here and extract it to a folder on your desktop once it is extracted you will again see the 2 folders atmosphere and bootloader again drag and drop these folders to the root directory of your sd card again select replace files you now have your sig patches now on to step 3

step 3 download sys patch 1.5.6 provided here extract to its own folder then again you will see the atmosphere folder and bootloader folder drag and drop to your root directory of your sd card and again select replace files
you have now updated your sys patch module now on to step 4

step 4 download mission control provided below this is to allow native support for most bluetooth controllers extract to its own folder and again you will see the atmosphere folder but this time with a folder called config again drag and drop these folders to your root directory of your sd card now you have updated your mission control now on to step 5

step 5 download fuse.zip provided here extract to its own folder then copy to this file path on your sd card the first folder is bootloader once in this folder select the payloads folder it is in this folder you paste the fuse.bin file after pasting replace file promt will come up select to replace the file you have now updated your fusee,bin which is required for atmosphere now on to step 6

step 6 updating lock pick rcm download the lockpick rcm provided here extract to its own folder and copy the lockpickrcm.bin to the payloads folder that you were just in once this is done you will see again the prompt to relace file go ahead and select it once the process is done we move to step 7

step 7 go to this site https://github.com/THZoria/NX_Firmware/releases and download the 20.50 firmware for your switch once downloaded extract to its own folder and name the folder firmware 20.50 once done copy this folder to the root of your sd card you will need it later once this is done we move to step 8

step 8 put your sd card back in your switch i am assuming you have an emunand that you boot from but for now you need to boot into stock mode from hekate so when you power on your switch it should boot into hekate once there select launch and select your stock mode once your switch is booted into stock mode go to settings then system and select update system once it finshes updating it will reboot once more boot back into stock mode to make sure everthing worked once you confirm you have updated your stock partition we will move to step 9

step 9 restart your switch and boot to hekate which should be automatic once back in hekate select payloads then select lockpick rcm it will boot into the lockpick rcm once there turn your switch side ways so you can properly read the menu move up and down using the vol + and - buttons on your switch scroll down to dump keys from sysnand press the power button to select once you select it will automaticaly dump the keys you need when it finishes it will say press any button to go back to previouse menu press the power button then at main menu scroll down and select dump amiibo keys once you select it it will auto dump then press any button to go back to main menu at this point you can scroll down and select reboot to hekate once there we go to step 10

step 10 ok so we are now back in hekate if you are running your prated games through an emunand which i recomend because otherwise you will get banned select launch and select emmumc you will now boot into your switch with atmosphere once your switch has booted we can do the last step to updating your system so we go to step 11

step 11 what i want you to do in this step is launch a game well holding down the right button on your switch this should take you to the homebrew menu once there search for and select the app daybreak once daybreak launches it will take you to a prompt that says install or exit select install this will now take you to the root directory of your sd card scroll down and select the frimware 20.50 folder that we put there earlier once selected it will automaticaly validate then select continue you will next see a prompt that sys reset to factory settings and preserve settings i want you to select preserve settings it will then take you to the next prompt saying install fat32 or inststall fat32+exfat you want to select install fat32+ exfat once you select this you will receive a prompt that says ready to begin update select continue and the update should install once it finishes you will recieve a prompt to reboot the system select reboot your system you will now be booted back to hekate in hekate select launch and select emmumc from here you will bott back to your switch emunand at the nintendo switch logo it might take some extra time so just be pationt and it will launch your system once it does congratulations you have fully updated your system i hope this helps you and that it is written in a way that you can easly follow if you have any more questions please dont hesitate to ask

I was so thrilled that you offered all this information without a single request for compensation.... If I could pay you some safe way I definitely would as you have definitely done me a great favor. With that being said.... For the moment it's all in Vain because one unforeseeable issue ....... I have an issue with my volume button it has not worked in ... 3+ years not sure what happened it's never bothered me as I hardly play in hand held mode and when I did I just used the screen Menu to turn up the volume. Is there another way I can navigate that menu that you mentioned to use the Volume buttons? If not I am at a loss at that point another modded switch with working volume buttons will be in place. I am not sure anyone in my area is knowledgeable about fixing or replacing the Volume buttons. Great Information...... All up until the mentioning of having to to use the Volume buttons. Unless there is another way......... Besides fixing the volume buttons. Darn!!! Almost!! I believe I could have done it as you really broke it down to where a kid could understand it.... LOL..... You really simplified it for me..... All to be stoped by some simple volume buttons...... Darn!!!! So close!!! The information you have shared with me will stop help out in the future. I don't have another Switch at the moment but it looks like I will be getting one..... And I will definitely make sure the Volume buttons work..... Both of them. I will still untalize the information you have given me

 

[froggy55]

I was so thrilled that you offered all this information without a single request for compensation.... If I could pay you some safe way I definitely would as you have definitely done me a great favor. With that being said.... For the moment it's all in Vain because one unforeseeable issue ....... I have an issue with my volume button it has not worked in ... 3+ years not sure what happened it's never bothered me as I hardly play in hand held mode and when I did I just used the screen Menu to turn up the volume. Is there another way I can navigate that menu that you mentioned to use the Volume buttons? If not I am at a loss at that point another modded switch with working volume buttons will be in place. I am not sure anyone in my area is knowledgeable about fixing or replacing the Volume buttons. Great Information...... All up until the mentioning of having to to use the Volume buttons. Unless there is another way......... Besides fixing the volume buttons. Darn!!! Almost!! I believe I could have done it as you really broke it down to where a kid could understand it.... LOL..... You really simplified it for me..... All to be stoped by some simple volume buttons...... Darn!!!! So close!!! The information you have shared with me will stop help out in the future. I don't have another Switch at the moment but it looks like I will be getting one..... And I will definitely make sure the Volume buttons work..... Both of them. I will still untalize the information you have given me

here you go download and extract to folder then copy all files to the folder named switch in your root directory and you should be good to go with everything else

Post automatically merged: Oct 17, 2025

here you go download and extract to folder then copy all files to the folder named switch in your root directory and you should be good to go with everything else

also if you are interested in repairs for your switch go to wayayeo.com there should be a number on the site you can call he should be able to fix your switch he is the one that modded my two switches he is a realy nice guy

 

[lee101]

here you go download and extract to folder then copy all files to the folder named switch in your root directory and you should be good to go with everything else

Post automatically merged: Oct 17, 2025

also if you are interested in repairs for your switch go to wayayeo.com there should be a number on the site you can call he should be able to fix your switch he is the one that modded my two switches he is a realy nice guy

Just the one Attachment you sent me with The file name Keys..... Or all the other Attachments as well?

Post automatically merged: Oct 17, 2025

here you go download and extract to folder then copy all files to the folder named switch in your root directory and you should be good to go with everything else

Post automatically merged: Oct 17, 2025

also if you are interested in repairs for your switch go to wayayeo.com there should be a number on the site you can call he should be able to fix your switch he is the one that modded my two switches he is a realy nice guy

Meaning do you want me to include all other Attachments.... Or just Keys Attachment? .... Or all + Keys attachment if so what about having to use the volume keys as I can't at the moment?

 

[froggy55]

Just the one Attachment you sent me with The file name Keys..... Or all the other Attachments as well?

Post automatically merged: Oct 17, 2025

Meaning do you want me to include all other Attachments.... Or just Keys Attachment? .... Or all + Keys attachment if so what about having to use the volume keys as I can't at the moment?

so you need evrything i uploaded the keys.zip is so you dont have to use lockpickrcm and worry about your button issue all the files in keys zip go in the switch folder on your sd card for everything else just follow my tutorial only you can skip the lockpick step

 

[lee101]

so you need evrything i uploaded the keys.zip is so you dont have to use lockpickrcm and worry about your button issue all the files in keys zip go in the switch folder on your sd card for everything else just follow my tutorial only you can skip the lockpick step

Gotcha I will let you know how much I Screw this up.... LOL

 

[froggy55]

Gotcha I will let you know how much I Screw this up.... LOL

i have faith in you