Hacking Sigpatches for Atmosphere (Hekate, fss0, fusee & package3)

[miniminx]

Hi, first of all thanks a lot for the modded fusee.bin. Now my games finally work. Still doesn't work via Hekate and package3 method though(I did amended the patches.ini file as mentioned above). But at least via fusee I get going until I figure out why sigpatches aren't applied via Hekate method, while it did worked always before with other fw and AMS versions.

But I can't find that HBMenu.json and extkeys.c file... Cause the forwarders still don't work as you said. Where should these files be situated? I searched my whole sd card lol.

Those files are not on your sd card, they are for a computer program called hacbrewpack which allows you to create nro forwarders. The online version will probably be updated soon once the dev updates their code. But for FW19 and the new atmosphere, everyone will need to create new NRO forwaders if they use them, but they will need to mod the source code for hacbrewpack to be able to make them.

Apart from NRO forwarders, there's some homebrew that will need updated, stuff that uses overlays such as sys-patch.

Also hekate with patches.ini works fine with the newly released hekate as I tested it our earlier, you will need to update your patches.ini file. You should have these lines in it:

#FS 19.0.0-fat32
[FS:D94C6815F8F50A20]
.nosigchk=0:0x021478:0x4:60090036,1F2003D5
.nosigchk=0:0x0745A0:0x4:89740394,E0031F2A
.nosigchk=0:0x074524:0x4:C0030054,10000014

#FS 19.0.0-exfat
[FS:EDA87868A4490750]
.nosigchk=0:0x021478:0x4:60090036,1F2003D5
.nosigchk=0:0x0745A0:0x4:95A20394,E0031F2A
.nosigchk=0:0x074524:0x4:C0030054,10000014

[Loader:D3FD950603AECC4D]
.nosigchk=0:0x602A:0x1:01,00

 

[IHOP]

Hey guys, im currently following the thread and when i boot (tried through new hekate, and fusee.bin) it just cuts to black after the NS logo and gives me a fatal error. I would love to send my bin file to someone that could help or one of the devs if they need it. The program ID is 69000000000000d with an error desc of: std(abort) called (0xffe)

thanks in advanced!

 

[purcello87]

Did you also update hos to fw19 with daybreak after updating AMS and Hekate? By me album works fine and could open Apps.

Are your HBL and HBmenu up to date?

Hey...
Which sigpatches you used?

I have a yellow screen, when i boot the atmosphere.
I think i used the wrong sigpatches, right?!

It always says "failed to apply nosigchk"

Can i do anything? Or just wait for now?

 

[Mars04]

Those files are not on your sd card, they are for a computer program called hacbrewpack which allows you to create nro forwarders. The online version will probably be updated soon once the dev updates their code. But for FW19 and the new atmosphere, everyone will need to create new NRO forwaders if they use them, but they will need to mod the source code for hacbrewpack to be able to make them.

Apart from NRO forwarders, there's some homebrew that will need updated, stuff that uses overlays such as sys-patch.

Also hekate with patches.ini works fine with the newly released hekate as I tested it our earlier, you will need to update your patches.ini file. You should have these lines in it:

#FS 19.0.0-fat32
[FS:D94C6815F8F50A20]
.nosigchk=0:0x021478:0x4:60090036,1F2003D5
.nosigchk=0:0x0745A0:0x4:89740394,E0031F2A
.nosigchk=0:0x074524:0x4:C0030054,10000014

#FS 19.0.0-exfat
[FS:EDA87868A4490750]
.nosigchk=0:0x021478:0x4:60090036,1F2003D5
.nosigchk=0:0x0745A0:0x4:95A20394,E0031F2A
.nosigchk=0:0x074524:0x4:C0030054,10000014

[Loader:D3FD950603AECC4D]
.nosigchk=0:0x602A:0x1:01,00

Thanks for explaining to me. And I got the Hekate/Package3 method also working now. I had the new lines copied under my old lines in patches.ini file. When I now tried to copy the lines mentioned earlier in the Impeeza patches.ini file for FW19, it actually worked already.

But that one has a lot of lines in it now, so will test later if I also get it working with just the three lines you mentioned above and deleting all the rest of lines. My previous one for fw18 actually looked like yours, also just three lines.

 

[IHOP]

Hey guys, im currently following the thread and when i boot (tried through new hekate, and fusee.bin) it just cuts to black after the NS logo and gives me a fatal error. I would love to send my bin file to someone that could help or one of the devs if they need it. The program ID is 69000000000000d with an error desc of: std(abort) called (0xffe)

thanks in advanced!

hey i actually solved my own issue on this one, if anyone encounters this error you have homebrew in your /atmosphere/contents/ folder thats conflicting w this build or having trouble gaining perms in that moment. whatever it is, deleting that contents folder solved my issue.

 

[miniminx]

hey i actually solved my own issue on this one, if anyone encounters this error you have homebrew in your /atmosphere/contents/ folder thats conflicting w this build or having trouble gaining perms in that moment. whatever it is, deleting that contents folder solved my issue.

You probably had mission control installed or some other sofware that needs updated ips patches. When you update Atmosphere you should always do a clean install - totally remove atmosphere folder and use a clean one. Remember that for future reference.

 

[svoc]

I got the fusee.bin files that was posted a little bit ago I still can't get games to boot days unable to start software. I have added the line to patch.ini another help

 

[miniminx]

I got the fusee.bin files that was posted a little bit ago I still can't get games to boot days unable to start software. I have added the line to patch.ini another help

You probably need to reinstall the game because when you tried before your switch flagged it as corrupt and now it will stay that way until it gets reinstalled.

 

[Mars04]

Hey...
Which sigpatches you used?

I have a yellow screen, when i boot the atmosphere.
I think i used the wrong sigpatches, right?!

It always says "failed to apply nosigchk"

Can i do anything? Or just wait for now?

I first copied all the sigpatches on first page of this thread to my sd card which said for FW 19. Then I also copied the patches from miniminx to same sd card, each time you just replace the ones which are already there on sd card.
And then its your choice if you want to use fusee loading or Hekate way. If you use package3, then you also check on first page of this thread how your Hekate.ipl.ini should look. if you want the fusee way, then you substitute that line which says fss0=atmosphere/package3 with payload=bootloader/payloads/fusee.bin

And just make sure you got the latest AMS and Hekate from Github and latest hos firmware via Daybreak. And if you want to use the fusee method, you download the modded one posted earlier in this thread and replace it with original one from AMS update.

 

[purcello87]

I first copied all the sigpatches on first page of this thread to my sd card which said for FW 19. Then I also copied the patches from miniminx to same sd card, each time you just replace the ones which are already there on sd card.
And then its your choice if you want to use fusee loading or Hekate way. If you use package3, then you also check on first page of this thread how your Hekate.ipl.ini should look. if you want the fusee way, then you substitute that line which says fss0=atmosphere/package3 with payload=bootloader/payloads/fusee.bin

And just make sure you got the latest AMS and Hekate from Github and latest hos firmware via Daybreak. And if you want to use the fusee method, you download the modded one posted earlier in this thread and replace it with original one from AMS update.

Hey mate..

Cheers for the quick answer.
I am quiet new in this thing.

I dont really know, what the difference between hekate and fusee is.

Do you think you could help me in a privat chat for a few minutes?

 

[svoc]

I installed a new game and it says checking to see if this game can be played

 

[miniminx]

I installed a new game and it says checking to see if this game can be played

If the icon keeps spinning and you installed all the correct patches for the firmware you are on, you updated hekate and atmosphere and did a clean install, you should try restarting your switch to make sure the patches get activated.

 

[svoc]

Sys patches shows all unpatched

 

[miniminx]

Sys patches shows all unpatched

That's because sys-patch doesn't work on FW19 and will need re-recompiled. If you'd have read a few posts above you wonld know this.

Here's a couple of NRO forwarders for testing on 19.0 FW (Tinwoo/DBI)

NRO paths:
/switch/dbi/dbi.nro
/switch/tinwoo/tinwoo.nro

 

[lsp199308]

Is the es fs patch correct?I noticed the patch is in a different location

https://github.com/borntohonk/Atmosphere/commit/234489a79c0d7b31ea70adfdd9f8bacc627f83f0

 

[svoc]

So im not able to play nsp games then because none of them boot

 

[miniminx]

Is the es fs patch correct?I noticed the patch is in a different location
View attachment 464372

https://github.com/borntohonk/Atmosphere/commit/234489a79c0d7b31ea70adfdd9f8bacc627f83f0

ES Patches are for : Run installed NSP files. Install NSP files without errors.

I can install and run NSP files just fine with the ES patches.

 

[locthanhtx]

I can not open tinfoil

 

[ztc8850]

I can not open tinfoil

I have the same problem. games works fine with the modded fusee posted. THx for t hat one. But tinfoil I cannot launch

 

[Mars04]

I have the same problem. games works fine with the modded fusee posted. THx for t hat one. But tinfoil I cannot launch

Some apps will need to be updated by the devs to run with FW19. Don't know if it's gonna happen soon for Tinfoil, since it's already offline for some days without notice.

But you can use DBI to install games as well.

Post automatically merged: Oct 13, 2024

So im not able to play nsp games then because none of them boot

If you have setup all right, then there shouldn't be a problem to play any nsp games.

They run all perfectly, nsp and xci games. Only some NRO apps won't work yet and need an update from the devs.