Hacking Modded Nintendo Switch Error

[Pablo140411]

Hey guys, i have a modded Nintendo Switch with Hekate 6.2.0 but when i turned it off completely, the hack wasn't activated, i have to hack again my Switch or there's a method to activate it without hacking it again?

 

[Deleted member 681324]

You need more details, is your Switch a V1 no modchip or a V2 modchip chip installed? I'm guessing you have a V1 and you have a black (or blank looking) screen when you power it on? You'll need a payload injector for your mobile or pc paired with the fusee.bin file found in the payloads folder on the SD card. Connect your Switch to your injector device and inject the fusee.bin payload... switch should boot?

 

[Pablo140411]

You need more details, is your Switch a V1 no modchip or a V2 modchip chip installed? I'm guessing you have a V1 and you have a black (or blank looking) screen when you power it on? You'll need a payload injector for your mobile or pc paired with the fusee.bin file found in the payloads folder on the SD card. Connect your Switch to your injector device and inject the fusee.bin payload... switch should boot?

Well... the switch don't have a modchip, when i turn it on it's like a normal switch (no modded) and i can't play my modded switch games, Can i do a command like turn it on while i press the volume buttons? Or i have to mod it again?

 

[thesjaakspoiler]

If you have no modchip, then there is no hack to boot straight into a CFW after turning your Switch off completely.

The best thing is to enable 'Auto-RCM'.
That will save you the trouble of using a jig.
Then the Switch goes to RCM mode directly and you only have to inject a payload.

 

[Deleted member 681324]

Well... the switch don't have a modchip, when i turn it on it's like a normal switch (no modded) and i can't play my modded switch games, Can i do a command like turn it on while i press the volume buttons? Or i have to mod it again?

If you have no modchip, then there is no hack to boot straight into a CFW after turning your Switch off completely.

The best thing is to enable 'Auto-RCM'.
That will save you the trouble of using a jig.
Then the Switch goes to RCM mode directly and you only have to inject a payload.

As stated, you'll need a RCM jig to short the pins on the right joy-con mount (in the Switch not the joy-con itself) to then power on whilst holding on the VOL+ to enter RCM mode on the switch(blank/black screen). Then comes the payload injector to boot the Switch into Atmosphere.

EDIT : Quick tool would be a paper clip if you don't already have the RCM jig.

 

[The Real Jdbye]

Hey guys, i have a modded Nintendo Switch with Hekate 6.2.0 but when i turned it off completely, the hack wasn't activated, i have to hack again my Switch or there's a method to activate it without hacking it again?

This is not an error. Just don't turn it off. But if you have a payload dongle, it takes less than 10 seconds to inject the payload, it really isn't much hassle.