Toggle sidebar

Hacking SWITCH NOOB PARADISE - Ask questions here

  • Thread starter Thread starter APartOfMe
  • Start date Start date
  • Views Views 6,101,008
  • Replies Replies 47,953
  • Likes Likes 66
Does anyone have the current Tits Pro host address? It looks like it got moved around again at some point recently and I'd like to get back in there
 
Guys
My
Switch is still playing up. Is there a way I can refresh and restart

What should I format my sd card ? Fat 32 or exfat
I want to be able to transfer large files

I did when v1 switch first was available to be modded and running from sd card and a jig / rcm loader I have
Any other tips ?
 
kyrusdemnati said:
Guys
My
Switch is still playing up. Is there a way I can refresh and restart

What should I format my sd card ? Fat 32 or exfat
I want to be able to transfer large files

I did when v1 switch first was available to be modded and running from sd card and a jig / rcm loader I have
Any other tips ?
Click to expand...

Fat32
 
kyrusdemnati said:
Guys
My
Switch is still playing up. Is there a way I can refresh and restart

What should I format my sd card ? Fat 32 or exfat
I want to be able to transfer large files

I did when v1 switch first was available to be modded and running from sd card and a jig / rcm loader I have
Any other tips ?
Click to expand...
Can you boot into OFW at least? Do you have an unpatched v1 Switch?
exFAT is more prone to the data corruption, while FAT32 isn't as much. Why do you want to transfer large files? What kind of files?

If you're able to boot into OFW without issues and you haven't blanked your prodinfo in the past, you can probably start from scratch by following one of these guides: NH Switch guide and Rentry.org Switch guide.

LouCifer said:
hey guys, i bet this question has been asked a million times here but i hacked my Switch back in 2018 and just updated the CFW a few times after that. There has been a lot of new methods that came out over the years and i saw that its possible to have a clean stock FW to play online and a CFW launchable on the same switch and still be relatively safe. I still got my backup from 2018 before i hacked my switch and checked the burnt fuses that shows 8 burnt (6.2.0).

Does anyone know how to set this up in the safest way possible?
Click to expand...
Did you install your CFW to your sysNAND or emuNAND? Which firmware is your OFW on?

By no means I'm expert on resetting the console and starting from scratch, but as far as I know, restoring an older NAND backup should be safe only if you haven't connected to the Internet without blocking the Nintendo servers on the OFW after you've made your backup. If you did connect to the Internet and haven't blocked Nintendo servers, your sysNAND has made some permanent changes while connected to Nintendo's servers that are not present in your original NAND backup. In other words, Nintendo has something more in their logs about your Switch, while you do not, therefore causing a mismatch.

I'd advise you not to restore your NAND backup blindly unless you're 100% sure that you were offline and in airplane mode between the time you've hacked your console and now. If that's the case, restoring a NAND backup should be safe enoguh.

More often than not, you don't need to restore a backup if you've used emuNAND and effectively blocked Nintendo servers.

If you can boot into OFW, connect to the Internet and access eShop and other Nintendo services, your sysNAND should be fine and you can start from scratch on how to setup emuNAND by following one of the guides, NH Switch guide or Rentry.org Switch guide.

Once you set up your emuNAND, I'd advise that you set up 90DNS or DNS MITM at the very least. Prodinfo blanking on emuNAND probably won't do much since it's unknown whether that info is cached somewhere else on the system. DBI, for example, can guess your serial number through "creative coding" as they call it. You can see whether it's true or not by going into system info option once in DBI.
 
Blythe93 said:
Can you boot into OFW at least? Do you have an unpatched v1 Switch?
exFAT is more prone to the data corruption, while FAT32 isn't as much. Why do you want to transfer large files? What kind of files?

If you're able to boot into OFW without issues and you haven't blanked your prodinfo in the past, you can probably start from scratch by following one of these guides: NH Switch guide and Rentry.org Switch guide.


Did you install your CFW to your sysNAND or emuNAND? Which firmware is your OFW on?

By no means I'm expert on resetting the console and starting from scratch, but as far as I know, restoring an older NAND backup should be safe only if you haven't connected to the Internet without blocking the Nintendo servers on the OFW after you've made your backup. If you did connect to the Internet and haven't blocked Nintendo servers, your sysNAND has made some permanent changes while connected to Nintendo's servers that are not present in your original NAND backup. In other words, Nintendo has something more in their logs about your Switch, while you do not, therefore causing a mismatch.

I'd advise you not to restore your NAND backup blindly unless you're 100% sure that you were offline and in airplane mode between the time you've hacked your console and now. If that's the case, restoring a NAND backup should be safe enoguh.

More often than not, you don't need to restore a backup if you've used emuNAND and effectively blocked Nintendo servers.

If you can boot into OFW, connect to the Internet and access eShop and other Nintendo services, your sysNAND should be fine and you can start from scratch on how to setup emuNAND by following one of the guides, NH Switch guide or Rentry.org Switch guide.

Once you set up your emuNAND, I'd advise that you set up 90DNS or DNS MITM at the very least. Prodinfo blanking on emuNAND probably won't do much since it's unknown whether that info is cached somewhere else on the system. DBI, for example, can guess your serial number through "creative coding" as they call it. You can see whether it's true or not by going into system info option once in DBI.
Click to expand...
Thanks for the reply, im 100% sure that i didnt connect my Switch to the internet for the entire time after hacking it, it has been on airplane mode since then. I just used the Haku33 method and wiped everything, my Switch didnt launched after that though, i got an fusee-secondary.bin error and after a little bit of research ive found out that fusee-primary and secondary doesnt exist anymore so i restored my old 2018 backup. Everything seems to work fine atm. Eshop launched and Fortnite is working as well, so i guess im not banned, at least not yet. Ive read that it can take a while before they ban someone, so i guess time will tell. Im trying to set up an emuNAND rn. Thank you for ur advise, ill take a look into these guides.
 
  • Like
Reactions: Blythe93
I have some games that requires me to download a game update (even if I "Start Software" it still downloads in the background). This happened because I didn't have MITM. Now I have MITM so when it tries to download an update it doesn't work. If I launch a game and then press home button, then try to go back to the game, I get an error. I tried using Goldleaf to reset the game versions (I did this on the Base game, not on any installed game updates) but this didn't work. How can I fix this?
 
  • Like
Reactions: Blythe93
steamcheapcom said:
I have some games that requires me to download a game update (even if I "Start Software" it still downloads in the background). This happened because I didn't have MITM. Now I have MITM so when it tries to download an update it doesn't work. If I launch a game and then press home button, then try to go back to the game, I get an error. I tried using Goldleaf to reset the game versions (I did this on the Base game, not on any installed game updates) but this didn't work. How can I fix this?
Click to expand...
I usually install my games and their latest updates with DBI and so far I've never run into that issue. I'd suggest that you give it a try and reinstall the game with the latest updates with DBI and see if you run into the same error again. Here's a good video showing how it works (that's how I used it since the first day I've hacked my Switch).
 
  • Like
Reactions: steamcheapcom
DBI's "Reset Required Version" feature worked for me. I went to "Manage Contents" or something like that, pressed "X" on each game (to select it) that I needed to reset the version on, then pressied "+" to bring up the menu, and selected "Reset Required Version". No more message when launching a game, and no more error.
 
  • Like
Reactions: Blythe93
Greeting !

Hey, I just got modded from second hand shop, and it have a lot of game.

(I don't know anything about modded switch.) After I uninstall some game I don't play with Tinfoil,

do I need to delete it's TICKET too ? if so what should I use to delete it ? DBI or Tinfoil ?

Thanks
 
Blythe93 said:
Can you boot into OFW at least? Do you have an unpatched v1 Switch?
exFAT is more prone to the data corruption, while FAT32 isn't as much. Why do you want to transfer large files? What kind of files?

If you're able to boot into OFW without issues and you haven't blanked your prodinfo in the past, you can probably start from scratch by following one of these guides: NH Switch guide and Rentry.org Switch guide.


Did you install your CFW to your sysNAND or emuNAND? Which firmware is your OFW on?

By no means I'm expert on resetting the console and starting from scratch, but as far as I know, restoring an older NAND backup should be safe only if you haven't connected to the Internet without blocking the Nintendo servers on the OFW after you've made your backup. If you did connect to the Internet and haven't blocked Nintendo servers, your sysNAND has made some permanent changes while connected to Nintendo's servers that are not present in your original NAND backup. In other words, Nintendo has something more in their logs about your Switch, while you do not, therefore causing a mismatch.

I'd advise you not to restore your NAND backup blindly unless you're 100% sure that you were offline and in airplane mode between the time you've hacked your console and now. If that's the case, restoring a NAND backup should be safe enoguh.

More often than not, you don't need to restore a backup if you've used emuNAND and effectively blocked Nintendo servers.

If you can boot into OFW, connect to the Internet and access eShop and other Nintendo services, your sysNAND should be fine and you can start from scratch on how to setup emuNAND by following one of the guides, NH Switch guide or Rentry.org Switch guide.

Once you set up your emuNAND, I'd advise that you set up 90DNS or DNS MITM at the very least. Prodinfo blanking on emuNAND probably won't do much since it's unknown whether that info is cached somewhere else on the system. DBI, for example, can guess your serial number through "creative coding" as they call it. You can see whether it's true or not by going into system info option once in DBI.
Click to expand...
Post automatically merged:

I have managed to get my switch sorted and now re installed games

Unfortunately my sd card is fat32 and my games are bigger . What is fastest way of transferring them over ?

Thanks
 

Site & Scene News

Go to forum More news

Popular threads in this forum

Dekopon - (Mostly) Fullspeed 3DS Emulation on Nintendo Switch

Emulation Emulator  NetherSX2 - Switch Port

Emulation Homebrew PS1/2 Emulator  ARMSX2-NX Initial Release

Emulation Emulator  Cemu - Wii U Emulator - Switch Port

Homebrew Homebrew game  Ultimate Switch Port Thread

Homebrew Homebrew game  Castlevania Symphony of the Night - Switch port

Homebrew Homebrew game  Angry Birds Classic - Switch Port

Homebrew Homebrew game  GTA: Liberty City Stories - Switch port