Hacking SWITCH NOOB PARADISE - Ask questions here

[Hayato213]

I have a blanked out serial and dns mitm is enabled, at least I think it is since there's an "emummc.txt" file in the atmosphere/hosts folder. Still, the Switch will still crash 10s after connecting to wifi.

For now to keep it from crashing I'm keeping airplane mode on, but I wanted to know if I could disable the serial blanking without risking a ban by only using dns mitm.

You don't have it setup correctly if it crash

 

[Finch6147]

You don't have it setup correctly if it crash

You're right, turns out dns mitm isn't enabled by default in the Atmosphere system_settings.ini.

 

[WizardWell]

Tainted unless you have a NAND backup before doing anything.

Question on this, how soon would sysMMC become tainted? If I boot into CFW sysMMC does that immediately make it more risky to do things like buy games from the eShop? I still have an interest in paying for indie games.

 

[Hayato213]

Question on this, how soon would sysMMC become tainted? If I boot into CFW sysMMC does that immediately make it more risky to do things like buy games from the eShop? I still have an interest in paying for indie games.

If you installed NSP/homebrew forwarder then it is tainted

 

[testing123]

I was forced to restart a hacked switch and haven't got a jig handy. Any possible workaround to get back into hacked mode?

 

[BigOnYa]

I was forced to restart a hacked switch and haven't got a jig handy. Any possible workaround to get back into hacked mode?

https://gbatemp.net/threads/paperclip-rcm-jig.502087/
And you would still need a payload pusher tool, like a PC, phone, etc (example; TegraRcmGUI) but obv you have since you here.

 

[rickstein00]

Hello, as you can see, I'm new to this forum.I came here looking for cheats for Pokemon on my recently modded Switch Lite. I wanted to have codes/cheats that allow me to encounter either shiny or rare Pokemon, and I found those codes in your forum. However, I don't know how to use them. I know I have to connect my SD card, but I couldn't find a tutorial on where to put them. Also, being new to this is confusing, as I don't know which thing goes where. The codes mention first and second paths, and I'm unsure if they should be in the same text file or different ones. I'm just lost here.Can anyone point me in the right direction on how to use this?

[#144 Articuno (1st Path)]
02100000 50B122B0 00000090

[#145 Zapdos (1st Path)]
02100000 50B122B0 00000091

[#146 Moltres (1st Path)]
02100000 50B122B0 00000092

[#150 Mewtwo (1st Path)]
02100000 50B122B0 00000096

[#243 Entei (1st Path)]
02100000 50B122B0 000000F3

[#244 Raikou (1st Path)]
02100000 50B122B0 000000F4

[#245 Suicune (1st Path)]
02100000 50B122B0 000000F5

[#249 Lugia (1st Path)]


[#144 Articuno (2nd Path)]
02100000 50B122E8 00000090

[Encounter Mod Activate (v1.3.0)]
04000000 00766F90 18FFFE68
04000000 00766FBC 18FFFD01
04000000 00766FC8 18FFFC81
04000000 0076708C 18FFF680
04000000 00767094 18FFF621
04000000 007670F0 18FFF360
04000000 007670F4 18FFF321


this is the link from the topic


threads/pokemon-sword-shield-v1-3-0-cfw-emu-cheat-codes.576083/

also im trying to get this for pokemon shield

 

[prof72]

I have 2 problems

here my story:
Hi i tried formatting my sd card but i use the nintendo switch
because the basic on pc (just using right click) there is no format for fat32 only ntfs
it only took 1 sec and it did not work, files are wipe and still on exfat

i use third party "easeus" but the longer format is not working
so i use quick format and so now its fat 32

i just so some thread here just copy paste all the files and were good so back it up

now heres the problem
1) i did not know about the partion emmucc so i dont know if i have that and i just simply format it so technically i dont know if i have that or what purpose of that

2) my SD card is nintendo brand 400 gig but after i formatted it it became 240gig, it might be fake or legit im not 100% sure because i bought my NS packaged of v2, jailbreak already with 400 gig nintendo sd card

now is there a way to check if its fake or legit?
is there some case that from exfat to fat32 it became smaller?

(as far as i know, sd card fake is hacked by there memory not capacity, example so their capacity is 64 gig but it shows 128 gig, what will happen is you cannot copy more files more than 64gig and you can format it several times but still it will show 128 gig) this is not my case, when im on exfat, i can copy up to 300+ gig files while leaving some extra for installation space because its either NSP or NSZ files

please help me out, i dont know what to do or whats happening

 

[Blythe93]

now is there a way to check if its fake or legit?

Now that you have formatted it anyway, you can test it with H2testw.

is there some case that from exfat to fat32 it became smaller?

That shouldn't happen. My guess is that it could have a hidden partition or something. Or it could be a wrong-sized card.

 

[prof72]

Now that you have formatted it anyway, you can test it with H2testw.

That shouldn't happen. My guess is that it could have a hidden partition or something. Or it could be a wrong-sized card.

i test the capacity and its only 240 gig

now is there a way to check that "hidden" partition?

 

[Hayato213]

i test the capacity and its only 240 gig

now is there a way to check that "hidden" partition?

Check with Minitool parititon wizard, it will show you all the partition on the card. 400GB card would be around 363GB real size.

 

[Blythe93]

I usually use Windows' diskpart utility (make sure you know what you're doing because you might end up deleting something you don't want), but as @Hayato213 mentioned, Minitool partition wizard should do the trick as well.

 

[RedColoredStars]

i test the capacity and its only 240 gig

now is there a way to check that "hidden" partition?

Even Windows built in disk management will show you all of the partitions. Just delete all partitions on the sdcard with whatever tool you'd like, then reformat as fat32.

 

[testing123]

https://gbatemp.net/threads/paperclip-rcm-jig.502087/
And you would still need a payload pusher tool, like a PC, phone, etc (example; TegraRcmGUI) but obv you have since you here.

Thanks. Just as a refresher, I need to get the right payload; how do I check which one I need to get and put on my PC?

 

[BigOnYa]

Thanks. Just as a refresher, I need to get the right payload; how do I check which one I need to get and put on my PC?

There are many but most use hekate or fusee. Best to use the most recent.
https://github.com/CTCaer/hekate
https://github.com/Atmosphere-NX/Atmosphere/releases
https://rentry.co/SwitchHackingIsEasy

 

[naldo29]

Was doing an m92t36 install and this came off, what capacitor was the one that suddenly came out what what do i need to replace it? thanks!

 

[prof72]

i know but perhaps if the codes are working for him
i wanted to know why i get crashes on my switch when i press "c" in edizon

my question was not about the codes, it was about something else

I usually use Windows' diskpart utility (make sure you know what you're doing because you might end up deleting something you don't want), but as @Hayato213 mentioned, Minitool partition wizard should do the trick as well.

Even Windows built in disk management will show you all of the partitions. Just delete all partitions on the sdcard with whatever tool you'd like, then reformat as fat32.

https://pasteboard.co/yGebJK0dCyj8.jpg

see my image using hekate, someone told me that i can check
am i doing it right?

is it original?
it says model "SN256" -

is it really just 256 gig?
"nintendo x sandisk" is it original?

 

[autumns]

Any way to change wifi region code on mariko switch? On V1's there's an option in incognito on tinfoil, but tinfoil doesn't show the incognito tab on mariko switches because incognito is incompatible with them

 

[prof72]

why the stardew valler is asking me

"a software update is required.
Update data will be downloaded"

my switch is;
current version: 16.1.0 | AMS 1.5.5|S

am i missing something?

 

[Blythe93]

why the stardew valler is asking me

"a software update is required.
Update data will be downloaded"

my switch is;
current version: 16.1.0 | AMS 1.5.5|S

am i missing something?

That's weird. As far as I can check, Stardew Valley with its latest update requires firmware 12.0.3.
I guess it could be that you have a pending update downloaded and you need to remove it by going into the maintenance mode.

Do the following:

1. Make sure that your Internet connection is disabled if you're connected right now and remove any saved connections as well.
2. Turn off your console (when in home menu, hold the power button for a few seconds and select power off).
3. Hold volume + and volume - at the same time and, while holding them, press the power button. After a while your Switch will enter into the maintenance mode. At this point the pending update is deleted.
4. Press the power button once again. It'll shut down the console.
5. Boot into CFW the way you usually do and make sure to activate flight mode. (Connecting to the Internet is safe only if you have DNS MITM in place.)

Hopefully, that will fix the pending update error.