Toggle sidebar

Hacking SWITCH NOOB PARADISE - Ask questions here

  • Thread starter Thread starter APartOfMe
  • Start date Start date
  • Views Views 6,097,076
  • Replies Replies 47,953
  • Likes Likes 66
Foxy-trn said:
Hello, I have a problem launching through Hekate CFW and OFW.

I don’t have EmmuMMC. I am checking if my 128Gb card is corrupt, but I doubt it.
As for the Hekate and Atmosphere files, they are updated.
I have a copy of NAND in version 13.2.1 and 14.1.1.
When launching CFW - sysMMC and OFW - sysMMC I will get: The error will always jump: unknown pkg1 version. HOS version not supported! Trying backup bootloader… Found pkg1 <´´>.
When launching Fuse.bin I will get:
  • 13.2.1: Invalid GPT Signature.
  • 14.1.1: Unable to identify package1!
What could be the reason? I’ve been trying to make it work for hours.
Yesterday there were no problems and the CFW was launched successfully.
I have tried different versions of Atmosphere without success.
Could the switch’s MicroSD card reader have broken? Any ideas?

Greetings!:lol:
Click to expand...

Test your SD card with h2testw.
 
Arithmatics said:
I have a super old V1 switch that's currently on 9.2.0 and is running atmosphere AMS 0.10.5|S. been out of the scene since the launch of switch V2

How do i update the firmware and get on whatever is the latest atmosphere/fusee gelee/ sigpatches?.

I also have a new 256GB memory i'd like to use. can i just copy the payload files onto the new SD card or do i need to keep the old SD card files handy?

Thanks in advance
Click to expand...
Updating the firmware depends if you want to burn your anti-downgrade fuses or not. If you don't mind burning them as well as running the risk of a ban, you can just update it on the console itself through the Internet. If you want to save your fuses, you can use homebrew app Daybreak which comes bundled with Atmosphere to update the firmware although you risk getting banned once you go online after using it since it still involves using CFW/homebrew.

The latest Atmosphere can always be found on the official GitHub page and this will never change unless something drastic happens to the developer which is highly unlikely. The latest patches can be found in this thread. Fusee Gelee is the name of the exploit which is tied to the hardware of your device so it will never be updated.

You send payloads via USB from your computer, phone, or dongle. Those files should normally not be on the SD card. Only CFW and homebrew files go on the SD card. All files can be copy and pasted from the old card to the new card except a partition-based emuMMC which requires Hekate to dump then restore onto the new SD card.
 
  • Like
Reactions: Arithmatics
Hayato213 said:
Test your SD card with h2testw.
Click to expand...
Warning: Only 187736 of 187737 MByte tested.
Test finished without errors.
You can now delete the test files *.h2w or verify them again.
Writing speed: 43.3 MByte/s
Reading speed: 87.1 MByte/s
H2testw v1.4

1682619600511.png

It’s not that, what could it be?
 
I accidentally desoldered a component on my switch next to the nvidia chip and now it looks like this, did I destroy it? If so where can I buy new ones?
 

Attachments

  • IMG_3091.png
    IMG_3091.png
    2.3 MB · Views: 69
Last edited by Dizzen,
  • Sad
Reactions: Foxy-trn
Foxy-trn said:
Hello, I have a problem launching through Hekate CFW and OFW.

I don’t have EmmuMMC. I am checking if my 128Gb card is corrupt, but I doubt it.
As for the Hekate and Atmosphere files, they are updated.
I have a copy of NAND in version 13.2.1 and 14.1.1.
When launching CFW - sysMMC and OFW - sysMMC I will get: The error will always jump: unknown pkg1 version. HOS version not supported! Trying backup bootloader… Found pkg1 <´´>.
View attachment 367472
When launching Fuse.bin I will get:
  • 13.2.1: Invalid GPT Signature.
  • 14.1.1: Unable to identify package1!
View attachment 367473

What could be the reason? I’ve been trying to make it work for hours.
Yesterday there were no problems and the CFW was launched successfully.
He probado diferentes versiones de Atmosphere sin éxito.
I have also tried with 2 other microSD cards without success.
Could the switch’s MicroSD card reader have broken? Any ideas?

Greetings!:lol:
Click to expand...
Hayato213 said:
Test your SD card with h2testw.
Click to expand...
I have been testing and checking, it still won’t start.
I tried to Lockpick_RCM.bin and I found the following:

1682638975525.png
 
Hayato213 said:
When you update atmosphere did you update fusee.bin?
Click to expand...
Yes, I updated fusee.bin, in fact I tried the previous versions compatible with 13.2.1 and 14.1.1, additionally I also tried fix archive bit. Currently I use the latest nintricks package compatible with 16.0.2 and it still won’t start.
 
anthony001 said:
does switch have a overcharging mechanism if left alone to charge either docked or non docked
Click to expand...

You should never leave a battery device plugged in all the time.
Post automatically merged:

Foxy-trn said:
Yes, I updated fusee.bin, in fact I tried the previous versions compatible with 13.2.1 and 14.1.1, additionally I also tried fix archive bit. Currently I use the latest nintricks package compatible with 16.0.2 and it still won’t start.
Click to expand...

In your case you possibly got a broken nand if you use the latest file and it wont boot.
 
Last edited by Hayato213,
Hayato213 said:
You should never leave a battery device plugged in all the time.
Post automatically merged:



In your case you possibly got a broken nand if you use the latest file and it wont boot.
Click to expand...
Can I rebuild it? Do you recommend that I perform mmc-rebuild
 
Last edited by Foxy-trn,
Hi, I did hacked my switch from a long time ago, I was wondering what I should do.

I NEVER booted in my sysnand in CFW, only my emunand because I'm worried about a ban.
I want to go in my sysnand for modding smash bros and play online, it's safe to do it, but unfortunately, in my emunand i'm doing nasty things that WILL get me banned, I know that the emunand is separated from the sysnand but I was wondering if the patches (sigpatches) to read unsigned program that I use on my emunand will also be applied on my sysnand as well since I will boot in cfw, and at this point it will be possible that I will get banned I guess

Should I : Delete everything, the emunand, the atmosphere folder, ect and do the hack from 0 for being sure that my switch is clean and boot on my sysnand with nothing specific except the mods for smash bros ?

Should I : Just update atmosphere and boot on my cfw ?
 
Kanakops said:
Hi, I did hacked my switch from a long time ago, I was wondering what I should do.

I NEVER booted in my sysnand in CFW, only my emunand because I'm worried about a ban.
I want to go in my sysnand for modding smash bros and play online, it's safe to do it, but unfortunately, in my emunand i'm doing nasty things that WILL get me banned, I know that the emunand is separated from the sysnand but I was wondering if the patches (sigpatches) to read unsigned program that I use on my emunand will also be applied on my sysnand as well since I will boot in cfw, and at this point it will be possible that I will get banned I guess

Should I : Delete everything, the emunand, the atmosphere folder, ect and do the hack from 0 for being sure that my switch is clean and boot on my sysnand with nothing specific except the mods for smash bros ?

Should I : Just update atmosphere and boot on my cfw ?
Click to expand...

Using mod and playing online is never safe from a ban.
 
  • Like
Reactions: Kanakops
Kanakops said:
Hi, I did hacked my switch from a long time ago, I was wondering what I should do.

I NEVER booted in my sysnand in CFW, only my emunand because I'm worried about a ban.
I want to go in my sysnand for modding smash bros and play online, it's safe to do it, but unfortunately, in my emunand i'm doing nasty things that WILL get me banned, I know that the emunand is separated from the sysnand but I was wondering if the patches (sigpatches) to read unsigned program that I use on my emunand will also be applied on my sysnand as well since I will boot in cfw, and at this point it will be possible that I will get banned I guess

Should I : Delete everything, the emunand, the atmosphere folder, ect and do the hack from 0 for being sure that my switch is clean and boot on my sysnand with nothing specific except the mods for smash bros ?

Should I : Just update atmosphere and boot on my cfw ?
Click to expand...
You can run the NAND as long as it’s clean. As long as you run the nasty things on the emuNAND and don’t connect to the internet, everything should be fine. If you ran CFW on sysNAND in the past, you should clean it using Haku33. If you follow these steps, you shouldn’t be banned.

But keep in mind what Hayato213 says.
Hayato213 said:
Using mod and playing online is never safe from a ban.
Click to expand...
 
  • Like
Reactions: Kanakops
Hayato213 said:
Using mod and playing online is never safe from a ban.
Click to expand...
Yeah I know but the smash community do not have any kind of problem while modding the game online, it's safe to assume it's not something that will get me banned if done in the correct condition, I was just wondering about the rest of my configuration and the paths available to me
 

Site & Scene News

Go to forum More news

Popular threads in this forum

Homebrew Homebrew game  Chrono Trigger - Switch port

Emulation Homebrew PS1/2 Emulator  ARMSX2-NX Initial Release

Dekopon - (Mostly) Fullspeed 3DS Emulation on Nintendo Switch

Emulation Emulator  NetherSX2 - Switch Port

Emulation Emulator  Cemu - Wii U Emulator - Switch Port

Hacking Homebrew Tutorial  New Switch Modpack, NX-ModPack

Homebrew Homebrew game  Ultimate Switch Port Thread

Homebrew Homebrew game  Castlevania Symphony of the Night - Switch port