Hacking need help ！XK3Y mixed media cannot display

[184190076]

HI，all
System version 2.0.17511
Elite Fat
XK3Y No remote control
menuiso= Y

Failure condition: USB 8G flash drive, xk3y firmware update from 1.06 to 2.01-4, wait 5-10 minutes, restart Xbox, open virtual disc, do not automatically close virtual disc, mixed media cannot display

PS: Pre-update firmware 1.06 using normal

@DinohScene

 

[lisreal2401]

Are you using the same ISO as before the update? Mixed media means it's picking it up as a content CD/DVD

 

[184190076]

Thank you lisreal2401 for quick reply, I long-term use usb hard drive, open the xbox show mix, this update makes me a headache, take three weeks to check the fault

--------------------- MERGED ---------------------------

Are you using the same ISO as before the update? Mixed media means it's picking it up as a content CD/DVD

yes,using the same ISO

 

[lisreal2401]

Have you tried other ISO files or is it only this disc?

 

[184190076]

Nope, just tried, I click open tray, and it says close tray, I click close tray and it never loads any mixed media disc. I tried about ten times. It never reads any mixed media disc.

 

[lisreal2401]

Wait... I know your English isn't the best but are you trying to load a DVD or a game?

 

[184190076]

Have you tried other ISO files or is it only this disc?

yes,tried other ISO，About 100 games on my usb hard drive.Unable to recognize usb hard drive

 

[DinohScene]

Try updating it again from an NTFS USB drive.
Also, allow some time to let the Xkey initialize the games on the HDD.
Can take a minute or 2.

 

[184190076]

Wait... I know your English isn't the best but are you trying to load a DVD or a game?

Yes, thank you very much for your help.English is very poor, google translation of these. I need to load the game ISO.

--------------------- MERGED ---------------------------

Try updating it again from an NTFS USB drive.
Also, allow some time to let the Xkey initialize the games on the HDD.
Can take a minute or 2.

Yes, thank you all. I try to update it. Need to drive the firmware again? The last firmware was acquired in 2012, and the new firmware was put into the xk3y memory card

 

[DinohScene]

Drive firmware is fine.
It's the Xkey firmware, try updating that again.

 

[184190076]

hi, all, thanks. After testing to solve the above problems, you can read iso, but there are other problems. Using the forum version 1.06 version_b.img reformat sd card, suggesting that the capacity of large, my card is type_b picture, well, test type_c, you can use this file to get a new sd card, once again the firmware and The configuration file is put in. Start the machine, select A to open the drive, and then the system automatically shut down the drive, display the mixed disc, and then I select the photo library loaded game iso, success, and then return to the home page, choose to exit the mixed data disc, the system automatically shut down the drive, usb hard drive data, show the game, I chose to play the game's black interface, feeling like the beginning of the implementation of the game, but can not enter the game, and immediately return to the home page. ps: home page appears to enter the game option, I press x can not correctly enter the details, but return to the home page.
new help(ง •̀_•́)ง

 

[DinohScene]

Have you stealth patched your discs with ABGX?

 

[184190076]

Have you stealth patched your discs with ABGX?

no,what,s ABGX？

 

[DinohScene]

Stealth patch all of your games with ABGX.
And hope you haven't been banned/flagged.

 

[184190076]

Stealth patch all of your games with ABGX.
And hope you haven't been banned/flagged.

Where can I download this patch, I try this to iso

 

[DinohScene]

Follow the tutorial I linked.

 

[184190076]

How To Recover From A Bad FPGA Flash

1) Get the USB Image Tool. See this thread for details:

http://k3yforums.com/viewtopic.php?f=6&t=489

2) Backup your current SD card
3) Restore xk_erase.img to your SD card
4) Insert the SD card
5) Boot your system. After 2-3 seconds the blue LED will tell you if the erase succeeded.
-Solid LED = Success, got to step 6
-Fast flashing LED = Fail, repeat step 5
-Slow flashing LED = check SD card is properly fitted / rewrite image and repeat step 5
6) Restore your SD card from the backup you made in step 1
7) Boot you system. The remote will display the message "Bad FPGA"
8) Update XKey with fpga.vme. This should take around 3 minutes. If it finishes very quickly and the remote still displays the "Bad FPGA" message after a reboot the repeat from step 6 (You will not be able to repeat the FPGA update until you restore your SD card image)

Q:
Hello, Try to fix it according to the tutorial my xkey, does not detect the reader or in "invisible" mode, the tray does not open when I turn it on from "Eject",

On the xbox screen, in the tray icon instead of "open Tray" appears only the phrase "reading", after 2 minutes the phrase changes to "Open Tray"

that brings my Xkey brings a green dot.

I hope it solves my problem

--------------------- MERGED ---------------------------

The situation is very bad now

 

[DinohScene]

Try this to recover the SD card.

Also, allow some time for the HDD to be initialized by the Xkey.
This can take a couple of minutes depending on the amount of games you have.