Hacking 3DS NOOB PARADISE - Ask questions here

[Zeonis]

I think at this point any DS flashcard that is sold as "new" should work in the latest version, as far as I know Nintendo gave up about the DS's flashcards.

Now, talking about quality, I don't remember quite well, but I guess that the ones from the link are kind of a copy of others, so, I don't know how the support might be.

I read some forums where people recommended the flashcards in the link I gave. But if you say that DS flashcards will work with the latest firmware then that is good to know.

 

[Dhaze]

question again
i'm following to the letter with plailect guide untill steps no 6 Launch the browser, then open the browser settings as fast as possible
my new 3ds with sysnand 9.90-20U
i follow step 1 to 6
when i launch browser. there's message telling me to update system.
maybe there's a step i miss?

 

[koyuki38]

Is it safe to update emuNand to 11 if i use GW EmuNand, rxtools and ReiNand ?

 

[Baccabechoppin]

Is it safe to update emuNand to 11 if i use GW EmuNand, rxtools and ReiNand ?

Yes it is safe to update emuNAND, if you still feel paranoid then make an emuNAND backup and then update so you have something to roll back to

 

[Temptress Cerise]

Thank you o/ ! I've finally change the name of my SD card orz

I've a last question (yeap again), I've a 2DS Pokemon Green Limited Edition but i'm not that okay to play on a Japan 2DS. But I REALLY want to play with the real cia (and the instant level 100 glitch) if i download a clean cia, there'll be no problem if Luma patch everything for RF ? Even if it's cryptofixed ?

Thanks !

If I'm understanding this right, you want to play the English versions of Pokemon Yellow//Red//Blue on a Japanese 2DS, correct? The cleanest solution I've found, is to just place the .cia of the game and the seeddb.bin containing the seed of the game into the Decrypt9 folder (or just the root). Then through Decrypt9 select Game Decryptor Options, then select CIA Decryptor (deep). Then installing that .cia of the game after it's done.

 

[Rick Astley]

If I'm understanding this right, you want to play the English versions of Pokemon Yellow//Red//Blue on a Japanese 2DS, correct? The cleanest solution I've found, is to just place the .cia of the game and the seeddb.bin containing the seed of the game into the Decrypt9 folder (or just the root). Then through Decrypt9 select Game Decryptor Options, then select CIA Decryptor (deep). Then installing that .cia of the game after it's done.

Thanks ! Actually I want to play the Green / Red / Blue Japanese on a N3DS a9lh + Luma... it's the same thing to do ?

 

[Temptress Cerise]

Thanks ! Actually I want to play the Green / Red / Blue Japanese on a N3DS a9lh + Luma... it's the same thing to do ?

If the N3DS is not Japanese region, and you want to play the Japanese versions of the game, then yes, the same still applies. If the N3DS is Japanese, then just install the .cia of the games as normal, then just visit the game's eshop page and repair it.

 

[Rick Astley]

Okay ! But I can't find any legit .cia of green etc... So for a seeddb.bin i think i've to ragequit this.

But now i've another problem. I play an VC Pokemon Green (so not the e-shop one because well), i start my save etc, i extract it with JKSM, edit it with the Rhydon save editor. Actually for ANY VC game it's a PAIN for me to extract / inject a save without any bug. But for Pokemon Green it's worst. I can try ANYTHING, there's two solution : the old save is kept OR the save is corrupted and new game. But it's not the case because i still can edit it etc

any help ? Thanks.

 

[GreenWins]

question again
i'm following to the letter with plailect guide untill steps no 6 Launch the browser, then open the browser settings as fast as possible
my new 3ds with sysnand 9.90-20U
i follow step 1 to 6
when i launch browser. there's message telling me to update system.
maybe there's a step i miss?

Your browser is blocked, but if you're fast enough you can bypass the update system message.

1. Change the date to January 1, 2000
2. Change the time to 00:00
3. Launch the browser, then open the browser settings as fast as possible
4. Scroll to the bottom and Initialize Savedata (it also may be called Clear All Save Data) as fast as possible.

Pretty much it's a speed test. You gotta do steps 4-9 on plailect guide as fast as possible.

 

[Deleted User]

Hi, I followed Plailect's guide when it was released and now I have my console with Cookies, armloader9 and sysnand updated to 11.0.0.33.

I have checked his site and now there are some differences, like installing Rednand and Luma3DS.

My questions are:
Can I install get Rednand and Luma3ds if I'm already on 11.0.0.33 with arm9?
What would I improve by getting these new tools?

 

[porko]

What are my options with a O3DS on 4.0.0-0E? The lack of a browser is killing me!

I have OoT, CN, and another 3DS with CFW, is there some way I can install a CFW and then update to 9.2.0-20E?

Edit: I also have an R4i DS flash card.

 

[Magsor]

What are my options with a O3DS on 4.0.0-0E? The lack of a browser is killing me!

I have OoT, CN, and another 3DS with CFW, is there some way I can install a CFW and then update to 9.2.0-20E?

Edit: I also have an R4i DS flash card.

. I think updating thru a cart is best.just any game in the last years will do. You can check version here then install oothax with the other hackesd 3ds

 

[Temptress Cerise]

Okay ! But I can't find any legit .cia of green etc... So for a seeddb.bin i think i've to ragequit this.

But now i've another problem. I play an VC Pokemon Green (so not the e-shop one because well), i start my save etc, i extract it with JKSM, edit it with the Rhydon save editor. Actually for ANY VC game it's a PAIN for me to extract / inject a save without any bug. But for Pokemon Green it's worst. I can try ANYTHING, there's two solution : the old save is kept OR the save is corrupted and new game. But it's not the case because i still can edit it etc

any help ? Thanks.

Unfortunately I have no experience with VC game save extraction//injection. However, the following links, may help. Again, may.
Links: https://gbatemp.net/threads/release...gba-rom-converter.390313/page-66#post-6060004
https://gbatemp.net/threads/fixes-for-all-gba-pokemons-save-issue-with-agb_firm.390508/

Hi, I followed Plailect's guide when it was released and now I have my console with Cookies, armloader9 and sysnand updated to 11.0.0.33.

I have checked his site and now there are some differences, like installing Rednand and Luma3DS.

My questions are:
Can I install get Rednand and Luma3ds if I'm already on 11.0.0.33 with arm9?
What would I improve by getting these new tools?

The guide makes you remove rednand//emunand, so unless you need rednand//emunand, you wouldn't gain anything from using it, as redNAND//emuNAND is only used to safely get the OTP for setting up A9LH, as explained better in the first couple of paragraphs in Part 3: https://github.com/Plailect/Guide/wiki/Part-3-(RedNAND)

As for Luma3DS, you can find info on it here: https://github.com/AuroraWright/Luma3DS/wiki

If you want to switch to Luma3DS, pretty sure you can just follow the Preparatory Work on Part 5 of the guide.
Link: https://github.com/Plailect/Guide/wiki/Part-5-(arm9loaderhax)

 

[kutiebboy]

Hi guys,

I bought a N3DS LL and have a game store's staff install CFS for me so I can play US games. I'm now very confuse with the system update, cant go online ( error code 002-0119 )

I take some pictures of my N3DS. Can anyone tell me what to do and what to install ?. Thank you.

 

[Temptress Cerise]

Hi guys,

I bought a N3DS LL and have a game store's staff install CFS for me so I can play US games. I'm now very confuse with the system update, cant go online ( error code 002-0119 )

I take some pictures of my N3DS. Can anyone tell me what to do and what to install ?. Thank you.

Update to the latest CFW ReiNand v4.1. Then update your emunand to the latest system update, via the System Settings -> Other Settings -> System Update.
Link: https://github.com/Reisyukaku/ReiNand/releases

 

[Monkeydunk]

Never mind I've found my answer. Should have looked a bit harder...

M.

 

[Stash23]

With A9LH installed, may can I run RxTools for EmuNAND? I read if I can boot without CFW, then into HBL, it may work... But how (and if) would I boot without CFW with A9LH installed? Or is it not possible?

 

[Jackall4BDN]

With A9LH installed, may can I run RxTools for EmuNAND? I read if I can boot without CFW, then into HBL, it may work... But how (and if) would I boot without CFW with A9LH installed? Or is it not possible?

If you really try it without booting into cfw and just via hbl, what even would be the point of keeping a9lh as opposed to just using themehax?

 

[Stash23]

If you really try it without booting into cfw and just via hbl, what even would be the point of keeping a9lh as opposed to just using themehax?

I want to have access to RxTool's advance tools not run the EmuNAND through RxTools.

 

[Jackall4BDN]

Oh, ok, well then just booting it through hbl sounds reasonable enough

- Quick and Dirty with TT -