Hello everyone!
Today I decided to turn on my WiiU screen printed Wind Waker HD after years.
I decided this to check if there was the problem that is plaguing several Hynix emmc consoles.
It should be noted that my WiiU was modified (before it was permanently switched off) only via Haxchii (without ColdBoot) and with a 32gb micro SD from Sandisk.
When I turned on the console I could see that it is permanently stuck on the WiiU logo without being able to do anything else.
I have already tried to start the recovery menu of GaryOder but without any success but I have seen in the log generated that there are no errors or problems in the mmc and I can normally make a dump of the otp and the seeprom. The main error reported in the logs is 103-1601. I also tried to connect via the wupserver to the WiiU to dump the system.xml but without any success and noting that the wupclient stops due to a problem on w.open ("/dev/fsa", 0).
I hope you can help me.
Today I decided to turn on my WiiU screen printed Wind Waker HD after years.
I decided this to check if there was the problem that is plaguing several Hynix emmc consoles.
It should be noted that my WiiU was modified (before it was permanently switched off) only via Haxchii (without ColdBoot) and with a 32gb micro SD from Sandisk.
When I turned on the console I could see that it is permanently stuck on the WiiU logo without being able to do anything else.
I have already tried to start the recovery menu of GaryOder but without any success but I have seen in the log generated that there are no errors or problems in the mmc and I can normally make a dump of the otp and the seeprom. The main error reported in the logs is 103-1601. I also tried to connect via the wupserver to the WiiU to dump the system.xml but without any success and noting that the wupclient stops due to a problem on w.open ("/dev/fsa", 0).
I hope you can help me.