Hacking USB won't work

[JyJ]

Hello all,

I've been using the site for a while, but I hadn't felt the need to register until now.

My Wii had been running games perfectly well until recently when the port 0 stopped being detected. My USB flashdrive works perfectly on my computer allowing me to modify its contents and such with no problems, I plugged a USB HDD on port 0 and it lights up, meaning the USB port has energy, it however isn't detected either.

While looking for help on the matter I tried everything on this link also and this link, without success.

I installed BootMii, the latest system menu using DOP Mii, cIOS 222 and 223. I started using a newer version of Configurable USB Loader. Tried force loading cIOS 223 on it, tried connecting a USB HDD on port 1 while my USB flashdrive was connected to port 0 and nothing works.

I've been trying to fix this issue for several days now without success. I was hoping you guys, who are much more knowledgeable could help me solve my issue.

Thanks for reading.

 

[JoostinOnline]

Why would you update the System Menu? Oh well, too late now.

Just remod your Wii with ModMii, using the link in my signature.

 

[JyJ]

It was just because my system menu was very outdated. Version 3.4 or something among those lines. But this isn't the issue. Everything's working fine, I can play original games perfectly, the problem's my port not being detected.

 

[JoostinOnline]

It was just because my system menu was very outdated. Version 3.4 or something among those lines. But this isn't the issue. Everything's working fine, I can play original games perfectly, the problem's my port not being detected.

Your System Menu doesn't affect what games you can play, or your USB port. 4.1 would have been a better choice.

You need to follow the directions I gave you.

 

[JyJ]

Okay, so I followed the intructions you gave me, downloaded everything and installed everything:
IOS236 v 5, PriiLoader 236 Mod, Simple IOS Patcher (IOS 36, 60, 70 and 80) on MultiMod Manager I downgraded to 4.1 U. I also selected Install and patch IOS36. I ran Configurable USB loader and still have the same issue...

I ran a system check.

Spoiler

sysCheck v2.0 by Double_A
...runs on IOS56 (rev 5662).

Region: NTSC-U
System Menu 4.1 (v449)
Hollywood v0x11
Console ID: 35605851
Boot2 v2

Found 142 titles.
Found 34 IOS on this console. 3 of them are stub.

IOS4 (rev 3): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS9 (rev 516): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS10 (rev 768): Stub
IOS11 (rev 256): Stub
IOS12 (rev 11): No Patches
IOS13 (rev 15): No Patches
IOS14 (rev 262): No Patches
IOS15 (rev 265): No Patches
IOS17 (rev 517): No Patches
IOS20 (rev 256): Stub
IOS21 (rev 522): No Patches
IOS22 (rev 777): No Patches
IOS28 (rev 1288): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS30 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS31 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS33 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS34 (rev 1039): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS35 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS36 (rev 65535): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 2070): ES Identify
IOS38 (rev 4124): No Patches
IOS50 (rev 4889): No Patches
IOS53 (rev 4113): No Patches
IOS55 (rev 4633): No Patches
IOS56 (rev 5662): No Patches
IOS60 (rev 6174): Trucha Bug
IOS70 (rev 6687): Trucha Bug
IOS80 (rev 6944): Trucha Bug
IOS202 (rev 4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223 (rev 4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS236 (rev 65535): Trucha Bug, ES Identify, NAND Access
IOS249 (rev 14): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS250 (rev 65535): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v2
MIOS v8

Report generated on 2011/09/27.

 

[JoostinOnline]

Okay, so I followed the intructions you gave me, downloaded everything and installed everything:
IOS236 v 5, PriiLoader 236 Mod, Simple IOS Patcher (IOS 36, 60, 70 and 80) on MultiMod Manager I downgraded to 4.1 U. I also selected Install and patch IOS36. I ran Configurable USB loader and still have the same issue...

You didn't follow ModMii if that is all you did.

 

[Riley]

Download WiiMC and see if it detects your usb .

 

[JyJ]

I ran WiiMod and those are the files it downloaded to my sd card. I replaced all my old files in it with the WiiMod files and installed all of them. Isn't that what I had to do?

Yes, WiiMC detects my HDD, I can run files from it.

 

[Bumper]

Looking at your sys check you did not do what joostin advised.

Start again, miss nothing follow the guide http://gbatemp.net/t207126-modmii-for-windows

 

[JoostinOnline]

I ran WiiMod and those are the files it downloaded to my sd card. I replaced all my old files in it with the WiiMod files and installed all of them. Isn't that what I had to do?

Yes, WiiMC detects my HDD, I can run files from it.

What you had to do was follow simple directions.

 

[JyJ]

I hadn't realized an actual guide was generated. I thought that by follow the guide you meant the wizard that downloaded the necessary files on my computer. Thank you very much, I will follow the instructions thoroughly this time. I will post an update on my situation tomorrow afternoon.

 

[JyJ]

I followed the guide carefully and this is my new system check. The problem still persists though.

Spoiler

sysCheck v2.0 by Double_A
...runs on IOS58 (rev 6176).

Region: NTSC-U
System Menu 4.1 (v449)
Hollywood v0x11
Console ID: 35605851
Boot2 v2

Found 146 titles.
Found 37 IOS on this console. 1 of them are stub.

IOS4 (rev 3): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS9 (rev 516): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS10 (rev 768): Stub
IOS11 (rev 16174): Trucha Bug, NAND Access
IOS12 (rev 11): No Patches
IOS13 (rev 15): No Patches
IOS14 (rev 262): No Patches
IOS15 (rev 1032): No Patches
IOS17 (rev 517): No Patches
IOS20 (rev 16174): Trucha Bug, NAND Access
IOS21 (rev 522): No Patches
IOS22 (rev 777): No Patches
IOS28 (rev 1288): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS30 (rev 16174): Trucha Bug, NAND Access
IOS31 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS33 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS34 (rev 1039): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS35 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS36 (rev 3608): No Patches
IOS37 (rev 2070): ES Identify
IOS38 (rev 4124): No Patches
IOS50 (rev 14889): Trucha Bug, NAND Access
IOS53 (rev 4113): No Patches
IOS55 (rev 4633): No Patches
IOS56 (rev 5662): No Patches
IOS58 (rev 6176): No Patches
IOS60 (rev 16174): Trucha Bug, NAND Access
IOS70 (rev 16687): Trucha Bug, NAND Access
IOS80 (rev 6944): Trucha Bug
IOS202 (rev 65535): Trucha Bug, NAND Access, USB 2.0
IOS222 (rev 4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223 (rev 4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224 (rev 65535): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 65535): Trucha Bug, ES Identify, NAND Access
IOS249 (rev 21006): Trucha Bug, NAND Access, USB 2.0
IOS250 (rev 21006): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v2
MIOS v8

Report generated on 2011/09/28.

I hope everything's in order now.

 

[JoostinOnline]

Just to be sure, are you using the port closest to the edge?

 

[JyJ]

Of course. It used to work perfectly, it stopped being detected without me modding it or anything.

 

[XFlak]

I found one of my old quotes that you might find helpful

http://gbatemp.net/t280673-getting-port-1-...t&p=3482298

I finally found the posts explaining How to get your usb-loader working using port1 instead of port0, but I don't think the port1 ehmodule will let you run games from FAT/NTFS, only WBFS... so u may have to beg oggzee to update it to support the other file systems too

instructions:
http://gbatemp.net/index.php?showtopic=196...t&p=2467184

more info:
http://gbatemp.net/index.php?showtopic=196...t&p=2464006


PS. apparently uloader and usbloader gx also have some support for port1, not exactly sure how to get that working, but its supported.

PPS. To all the ppl still talking about cIOSs in this thread... get a clue, the cIOS used isn't the issue here... so why are ppl still talking about it?

edit:

Or send the wii to me and I'll repair it for you.

or just get Foez to fix your port0, he's already got a usb header ready for u

 

[JyJ]

Will this work with configurable usb loader 70 though? They only talk about CFG 50, I've been trying to find it, without success, oldest one I can find is 51.

 

[JyJ]

I looked it up and after a while finally found it. I followed your steps carefully, it didn't work.

I decided to try my luck with u Loader, in oder to run games on port 1 on uLoader one needs to activate a hack, I followed the instructions and the loader asks me to plug and unplug the device on port 1. However, they aren't read.

Neither CFG nor uLoader seem capable of reading any of my ports. WiiMC however can read files on both ports from my HDD. My flashdrive, which is formatted as WFSB, blinks once when I plug it in WiiMC, meaning it reacts, at least. This doesn't happen on the Loader channels. I don't know what to do anymore...