Hacking USB Loader GX

[d3monsting]

*SNIP* be quicker? *SNIP*

As in like (I think the older version) just went back to the loader, vs. (boot channel, load the USB Loader again (with the cute loading screen, and the re-init of the HDD... etc).

 

[Ikeiratama]

I Always have used this Loader in my Wii, but since the NEW v.2.0 I see many many problems...

Even there are people that say that it make blackbricks!!!!

Please, could somebody transmit these problems to his creators??

Thank you.

These words are not a joke.

 

[Kittymat]

I Always have used this Loader in my Wii, but since the NEW v.2.0 I see many many problems...

Even there are people that say that it make blackbricks!!!!

Please, could somebody transmit these problems to his creators??

Thank you.

These words are not a joke.

1) What problems - you have given zero info
2) Rubbish - Who says that
3) No issues to report as you give no info

 

[Ikeiratama]

I Always have used this Loader in my Wii, but since the NEW v.2.0 I see many many problems...

Even there are people that say that it make blackbricks!!!!

Please, could somebody transmit these problems to his creators??

Thank you.

These words are not a joke.

1) What problems - you have given zero info
2) Rubbish - Who says that
3) No issues to report as you give no info

It is for me difficultly to express in English ... this it is the reason why I don´t give many explanations of which are the problems etc.

In my case, the loader stops loading games (black screen) after one day working well .... and also it has filled the list of favorites with all the existing games in my HD (>400 games).

In this topic of the forum of scenabeta people speak about that: http://wii.scenebeta.com/node/29815

I have tried r1038; r1049; r1059; r1072

 

[Cyan]

You need to be registered to read that forum.
And plus, it's not in french at all, I thought you were french.

Well, did you try deleting all your config files and let the loader create them again ?
double check that you don't have config files both in SD and USB, maybe it's loading the wrong one.
blackscreen for all the games ? no games working at all ? but you can still boot the Wii and the loader, so it's not a brick.
Did you try another HDD ?
Did you try another USB loader ?
Did you try to go back to r927 (or 938) ? (attention, you will need cIOS rev17 for wbfs or hermes v4 for fat32/ntfs)
what's the result ?

 

[dexter222]

Wow Congratz Cyan on your moderator status!

You're one of the most helpful people on this board. Well deserved kudos!

 

[cobleman]

Every black screen i have had since v2 was released has been a simple fix.
In game settings set video mode to disc default (my tv does handle both PAL and NTSC)

 

[robjanssen]

I Always have used this Loader in my Wii, but since the NEW v.2.0 I see many many problems...

Even there are people that say that it make blackbricks!!!!

Please, could somebody transmit these problems to his creators??

Thank you.

These words are not a joke.

1) What problems - you have given zero info
2) Rubbish - Who says that
3) No issues to report as you give no info

It is for me difficultly to express in English ... this it is the reason why I don´t give many explanations of which are the problems etc.

In my case, the loader stops loading games (black screen) after one day working well .... and also it has filled the list of favorites with all the existing games in my HD (>400 games).

In this topic of the forum of scenabeta people speak about that: http://wii.scenebeta.com/node/29815

I have tried r1038; r1049; r1059; r1072

Try deleting all your condig files.

GlobalSettings.cfg
GameSettings.cfg
GameStatistics.cfg

 

[Cyan]

@dexter : Thanks buddy.

@cobleman :
if he tried r1072 then the default video mode is set back to game default (but only if he don't have game setting already saved with console default).
He should try to delete his config files and report back.

 

[Ikeiratama]

You need to be registered to read that forum.
And plus, it's not in french at all, I thought you were french.

Well, did you try deleting all your config files and let the loader create them again ?
double check that you don't have config files both in SD and USB, maybe it's loading the wrong one.
blackscreen for all the games ? no games working at all ? but you can still boot the Wii and the loader, so it's not a brick.
Did you try another HDD ?
Did you try another USB loader ?
Did you try to go back to r927 (or 938) ? (attention, you will need cIOS rev17 for wbfs or hermes v4 for fat32/ntfs)
what's the result ?

Hi again:

First of all, thanks for all the answers.

Yes, you need to be registerd, I think that is not a ploblem...
I´m not French. That is a Joke. I´m from the North of Spain, Vasque Country, but I don´t feel my head like a Spanish one, that is the reason.
I deleted all config files in my SD... My HD has only 1 partition on WBFS (runs OK).
I didn´t had a blackbrick... I said that there is people that is reporting that issue... is not my case.
Now I use the CFG USB Loader r65 under cIOS249 base38 v21. For some games like Monster Hunter and Call of Duty Black OPS I change the cIOS.
When I go back to GX v1.0 r938, all is OK.

My worry comes for me becouse v2.0 start running well and after a time doesn´t run... and becouse other people is reporting blackbricks.

I wish know if at this forum people is happy with this new version, or if here there are so many problems with it too.

Thanks for your support!!!

 

[robjanssen]

You need to be registered to read that forum.
And plus, it's not in french at all, I thought you were french.

Well, did you try deleting all your config files and let the loader create them again ?
double check that you don't have config files both in SD and USB, maybe it's loading the wrong one.
blackscreen for all the games ? no games working at all ? but you can still boot the Wii and the loader, so it's not a brick.
Did you try another HDD ?
Did you try another USB loader ?
Did you try to go back to r927 (or 938) ? (attention, you will need cIOS rev17 for wbfs or hermes v4 for fat32/ntfs)
what's the result ?

Hi again:

First of all, thanks for all the answers.

Yes, you need to be registerd, I think that is not a ploblem...
I´m not French. That is a Joke. I´m from the North of Spain, Vasque Country, but I don´t feel my head like a Spanish one, that is the reason.
I deleted all config files in my SD... My HD has only 1 partition on WBFS (runs OK).
I didn´t had a blackbrick... I said that there is people that is reporting that issue... is not my case.
Now I use the CFG USB Loader r65 under cIOS249 base38 v21. For some games like Monster Hunter and Call of Duty Black OPS I change the cIOS.
When I go back to GX v1.0 r938, all is OK.

My worry comes for me becouse v2.0 start running well and after a time doesn´t run... and becouse other people is reporting blackbricks.

I wish know if at this forum people is happy with this new version, or if here there are so many problems with it too.

Thanks for your support!!!

I'm happy with version USB Loader GX 2.0
When I first upgraded to version 2.0, I also had some problems, after starting certain Wii Games, for example Wii Fit Plus, no games worked anymore.
I found out that it was a config setting. In the GXGlobal.cfg there is a cios setting, this was cios = 0 in my case.
And that caused the problem.
Changing that setting to cios = 249 or deleting that config file solved the problem for me.
After that i haven't had any problems, so I'm happy with USB Loader GX version 2.0

 

[binded2]

is there a way in the settings for global and for also per game to select ios i know theres the settin but i mean a drop down list of aviable ios and not have to type them in

it would be nice if your able to tell what base there are

 

[robjanssen]

is there a way in the settings for global and for also per game to select ios i know theres the settin but i mean a drop down list of aviable ios and not have to type them in

it would be nice if your able to tell what base there are

cIOS202[57]-v5.wad
cIOS222[38]-v5.wad
cIOS223[37]-v5.wad
cIOS224[57]-v5.wad
cIOS249[56]-v21d2x2.wad
cIOS250[57]-v21d2x2.wad

You the IOS's (bases) you can use are: 202, 222, 223, 224, 249 and 250
With USB Loader GX most games work with 249. Call Of Duty Black Opps needs IOS 250.

 

[Cyan]

No, there's no automatic drop down, you have to know what you have installed on your own console. (checking for every 255 slot would be really slow).
If you followed a guide, look at the wad filenames,or ask into the guide website.
or (re)install the cIOS you need in the slot you decides, and write it somewhere.

 

[Ikeiratama]

You need to be registered to read that forum.
And plus, it's not in french at all, I thought you were french.

Well, did you try deleting all your config files and let the loader create them again ?
double check that you don't have config files both in SD and USB, maybe it's loading the wrong one.
blackscreen for all the games ? no games working at all ? but you can still boot the Wii and the loader, so it's not a brick.
Did you try another HDD ?
Did you try another USB loader ?
Did you try to go back to r927 (or 938) ? (attention, you will need cIOS rev17 for wbfs or hermes v4 for fat32/ntfs)
what's the result ?

Hi again:

First of all, thanks for all the answers.

Yes, you need to be registerd, I think that is not a ploblem...
I´m not French. That is a Joke. I´m from the North of Spain, Vasque Country, but I don´t feel my head like a Spanish one, that is the reason.
I deleted all config files in my SD... My HD has only 1 partition on WBFS (runs OK).
I didn´t had a blackbrick... I said that there is people that is reporting that issue... is not my case.
Now I use the CFG USB Loader r65 under cIOS249 base38 v21. For some games like Monster Hunter and Call of Duty Black OPS I change the cIOS.
When I go back to GX v1.0 r938, all is OK.

My worry comes for me becouse v2.0 start running well and after a time doesn´t run... and becouse other people is reporting blackbricks.

I wish know if at this forum people is happy with this new version, or if here there are so many problems with it too.

Thanks for your support!!!

I'm happy with version USB Loader GX 2.0
When I first upgraded to version 2.0, I also had some problems, after starting certain Wii Games, for example Wii Fit Plus, no games worked anymore.
I found out that it was a config setting. In the GXGlobal.cfg there is a cios setting, this was cios = 0 in my case.
And that caused the problem.
Changing that setting to cios = 249 or deleting that config file solved the problem for me.
After that i haven't had any problems, so I'm happy with USB Loader GX version 2.0

Thanks.

 

[binded2]

No, there's no automatic drop down, you have to know what you have installed on your own console. (checking for every 255 slot would be really slow).
If you followed a guide, look at the wad filenames,or ask into the guide website.
or (re)install the cIOS you need in the slot you decides, and write it somewhere.

i didnt really follow a guide i know where most of my stuff is and what slot is what i just wanted to know if it was possable for a drop down you answered it thanks

for some reason i thought that there was one in the older ver

 

[Cyan]

there was one because it was a fixed list, 222/223/224/249/250 only.
Now since cIOSx can install into any slot, dimok changed the selection method too.

 

[jaouad]

Anyone having trouble with super mario galaxy 2, black screen on default ciOS. I am trying to fix a wii of a friend, but don't want him to use all these complicated stuff. It works on ios 246(ios 56 installed). But on 249 (also ios 56 installed) it does nothing but a black screen.

I'm sure i'm not the only one!!

 

[jaouad]

I always use wiiflow and found usb loader gx as the only good usbloader not requiring an sd card. Honestly, it kinda sucks. Having trouble with mario galaxy starting from default ios, and lego now indiana jones 2 as well while everything works flawlesly on wiiflow standard ios. *sigh*

Isn't there a wiiflow that doesn't require sd ?

 

[Cyan]

Are 246 and 249 from the same cIOSx revision ?

Maybe an IOS reload problem. But I'm using 249 and all works fine.
Does it do it for other games too, or only galaxy 2 ?

For me, it could be a video output problems too, like if this is an out of region (NTSC) game, and you still use an old revision of the loader (2.0 is old), then you have to set video mode to "game default" instead of "system default". try reseting the game setting for that game only.
On newer revision, System default is now the default mode.