Hacking USB Loader GX dont work anymore?

  • Thread starter Thread starter Naxster
  • Start date Start date
  • Views Views 6,279
  • Replies Replies 40
that's not the solution.
249 and 250 should work the same way (if you just installed both like I said).

if using 249 create exception/code dump, then it's an issue with the cIOS.
try reinstalling it.


How do i do that?
I downloaded d2x v8 Final WAD and installed all the wads inside the folder before i tried your method and it didn't work.
After i used your method it worked.
 
that's not the solution.
249 and 250 should work the same way (if you just installed both like I said).

if using 249 create exception/code dump, then it's an issue with the cIOS.
try reinstalling it.

That's what I thought. 250 is just a backup for 249..
 
I don't know how to say this.... But hahaha it doesn't work anymore!:O

After i closed USB loader GX and started it again (just for a test), i get the same problem....

What can i do? :(
 
How do i do that?
I downloaded d2x v8 Final WAD and installed all the wads inside the folder before i tried your method and it didn't work.
After i used your method it worked.

Do the same steps as before. Go into the d2x cIOS Installer, install cIOS249 again.

I doubt the problem is the base IOS. Try changing the version number to v65535.
 
Can you do a sysCheck?

Ofcourse!

Here it is:

sysCheck v2.1.0b13 by Double_A and R2-D2199
...runs on IOS58 (rev 6176).

Region: PAL
System Menu 4.1E (v450)
Priilaoder installed
Homebrew Channel 1.0.0 running on IOS0
Hollywood v0x21
Console ID: 136175788
Boot2 v4
Found 112 titles.
Found 55 IOS on this console. 4 of them are stub.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 16174): Trucha Bug, NAND Access
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 1032): No Patches
IOS20 (rev 16174): Trucha Bug, NAND Access
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 16174): Trucha Bug, NAND Access
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3608): No Patches
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 16174): Trucha Bug, NAND Access
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 16174): Trucha Bug, NAND Access
IOS51 (rev 4864): Stub
IOS52 (rev 16174): Trucha Bug, NAND Access
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 16174): Trucha Bug, NAND Access
IOS61 (rev 5662): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 16174): Trucha Bug, NAND Access
IOS80 (rev 16174): Trucha Bug, NAND Access
IOS202[60] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS222[38] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223[75] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224[57] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS245[37] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS246[38] (rev 21008, Info: d2x-v8final): Trucha Bug, ES Identify, NAND Access
IOS247[53] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS248[55] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS249[56] (rev 65535, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS251[58] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v10

Report generated on 2015/01/02.
 
Ofcourse!

Here it is:

sysCheck v2.1.0b13 by Double_A and R2-D2199
...runs on IOS58 (rev 6176).

Region: PAL
System Menu 4.1E (v450)
Priilaoder installed
Homebrew Channel 1.0.0 running on IOS0
Hollywood v0x21
Console ID: 136175788
Boot2 v4
Found 112 titles.
Found 55 IOS on this console. 4 of them are stub.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 16174): Trucha Bug, NAND Access
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 1032): No Patches
IOS20 (rev 16174): Trucha Bug, NAND Access
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 16174): Trucha Bug, NAND Access
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3608): No Patches
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 16174): Trucha Bug, NAND Access
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 16174): Trucha Bug, NAND Access
IOS51 (rev 4864): Stub
IOS52 (rev 16174): Trucha Bug, NAND Access
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 16174): Trucha Bug, NAND Access
IOS61 (rev 5662): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 16174): Trucha Bug, NAND Access
IOS80 (rev 16174): Trucha Bug, NAND Access
IOS202[60] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS222[38] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223[75] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224[57] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS245[37] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS246[38] (rev 21008, Info: d2x-v8final): Trucha Bug, ES Identify, NAND Access
IOS247[53] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS248[55] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS249[56] (rev 65535, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS251[58] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v10

Report generated on 2015/01/02.


This sounds like a lot to ask, but could you try all of your cIOSes?
 
How do i try them? I cant access USB loader GX :(

Sorry for these questions, i'm kinda at this :(

Go to USB Loader GX's meta.xml (sd://apps/usbloader_gx/meta.xml), open it with Notepad (or WordPad if you prefer) and, where it says "ios=249", change that to "ios=224" or "ios=251" or "ios=245"... you get the point. Basically cycle through all your cIOSes.
 
Go to USB Loader GX's meta.xml (sd://apps/usbloader_gx/meta.xml), open it with Notepad (or WordPad if you prefer) and, where it says "ios=249", change that to "ios=224" or "ios=251" or "ios=245"... you get the point. Basically cycle through all your cIOSes.


Even IOS 3, 4 , 9.. etc etc...
 
I
No, just your cIOSes. I'll list them:

202
222
223
224
245
246
247
248
249
250
251

You can also try 236, but I don't think that'll work.

I am going to try that.
But i don't know if i did it right. But i downloaded this file

https://code.google.com/p/usbloader...r_GX_V3_0_AllinOnePackage_IOS249.zip&can=2&q=

And replaced tis new file over the old files i had in my SD card. And it worked.
And the IOS on this new file is 250.
But now gamecube games wont work anymore :(
This shows up "the game is on usb, do you want, do you want to copy the game to sd"
 
I

I am going to try that.
But i don't know if i did it right. But i downloaded this file

https://code.google.com/p/usbloader...r_GX_V3_0_AllinOnePackage_IOS249.zip&can=2&q=

And replaced tis new file over the old files i had in my SD card. And it worked.
And the IOS on this new file is 250.
But now gamecube games wont work anymore :(
This shows up "the game is on usb, do you want, do you want to copy the game to sd"

Try using a backup loader just for GameCube games, like DIOS MIOS or Nintendont.

EDIT: Also, 100 posts :D
 
Try using a backup loader just for GameCube games, like DIOS MIOS or Nintendont.

EDIT: Also, 100 posts :D


Now it worked!
I thought: "Screw it, it can't get any worse than this" so i downloaded the latest version of USB Loader GX "V3.0 r123 MOD" and installed it.
And there i could find the settings for nintendont.
Now is there anything else i should do, just to make sure that this wont happen again??? :D

Hahaha Congrats!
 
Now it worked!
I thought: "Screw it, it can't get any worse than this" so i downloaded the latest version of USB Loader GX "V3.0 r123 MOD" and installed it.
And there i could find the settings for nintendont.
Now is there anything else i should do, just to make sure that this wont happen again??? :D

Hahaha Congrats!

Well, problem solved after almost 40 replies! XD

'Grats for fixing it!
 

Site & Scene News

Popular threads in this forum