trinket M0

[chipgame321]

Hi,
I want to install an m0 trinket in my unpatched swtich, can you tell me what files to install in the trinket before installing it in the console?
Thanks

 

[Badablek]

Hello,

everything is explained in this thread...and this one

you have to flash fusee_suite part1 then fusee_suite part2, and you're done. Then, the trinket will automatically launch "payload.bin" in the root of a microSD card.
EDIT : of course it will automatically launch payload.bin IF joycon strap AND Vol+ strap are wired to the modchip

 

[chipgame321]

doesn't work

 

[Badablek]

it works...for everybody who followed carefully the instructions, since the beginning of modchips on unpatched Switch.

I have modded all my 3 unpatched Switch with it. And thousand(s) people did the same with this

 

[chipgame321]

the link to download the files does not work look

 

[xoINARIox]

https://github.com/mattytrog/FUSEE_SUITE/tree/master/Fusee-Suite/Part_1_UF2_FLASH_FIRST
https://github.com/mattytrog/FUSEE_...te/Part_2_LONG_PRESS_FLASH_SECOND/TRINKET.UF2

https://github.com/mattytrog/FUSEE_SUITE

 

[Badablek]

the link to download the files does not work look

then be more specific next time...because "doesn't work" is not enough to help anybody
everything is on github, thanks xolNARlox you won't have to search too much.

thread is at least 2 years old...so it can contain dead links.

 

[chipgame321]

thank you. to enter programming mode you have to press the reset button twice, right? if that's it for me nothing happens

 

[Badablek]

you have to plug your trinket to your computer, then press reset button twice, quickly.

Entering Bootloader Mode​

The first step to loading new code onto your board is triggering the bootloader. It is easily done by double tapping the reset button. Once the bootloader is active you will see the small red LED fade in and out and a new drive will appear on your computer with a name ending in BOOT. For example, feathers show up as FEATHERBOOT, while the new CircuitPlayground shows up as CPLAYBOOT, Trinket M0 will show up as TRINKETBOOT, and Gemma M0 will show up as GEMMABOOT

https://learn.adafruit.com/adafruit-trinket-m0-circuitpython-arduino/uf2-bootloader-details