Things you recently bought or got

[hippy dave]

Can this be used with any console or just rgb enabled ones?

This doesn't actually accept RGB, only composite, component or S-Video.

 

[Veho]

Wall-E and Eve blockheadz or whatever.

Come play with us, Veho...
Forever and ever...​

 

[Joe88]

Was on sale for $55, my first model kit, just need a good pair of nibbers now. Jehuty and Anubis kits are over $100 each so those will have to wait for another day.

 

[Silterpy]

My clear blue R36S came this weekend, and when I went to play it, the SD card was dead, so I ordered a 32GB Patriot micro SD card and installed ArkOS AeolusUX on it. I also installed the Wi-Fi chip, and it works great.

I was supposed to go to the reptile expo last weekend, but my friend wasn't able to make it, and I didn't feel like going by myself (I was going to go because he wanted to go), so I ordered the foods I needed from the vendor I buy them from. So I got 20 frozen adult mice for my adult male corn snake, 20 pinky mice for my young female corn snake, 12 nightcrawlers for my Pacman frog, and 500 1/2" crickets for anything else that is an insectivore (basically my Pacman frog and geckos). I don't need 500 crickets, but it was the same price as getting 200 (2 packs of 100), so I'll end up giving some to my friends that have pets that eat them.

 

[impeeza]

Just come on the mail my new Filament Dryer!
I got on an Amazon sale for 69.99 now is 108.99 !!

Tomorrow will test the TPU which last time ended clogging the nozzle.

 

[NeoGranzon]

Arrived today

 

[impeeza]

I just Print a puzzle created by Oskar van Deventer, a master puzzler, And him let you print some of his creations for free, if you like to sell them please send royalties to him, the models are on the page https://oskarvandeventer.nl/Print-It-Yourself/ with pictures, instructions and links to his youtube videos of each puzzle.

This is called Twisted Cable, and is an improvement of a traditional one where you can solve by rubbing the parts between the hands, this new version needs you to make two groups and fit together by threading them.

 

[yankii]

I just Print a puzzle created by Oskar van Deventer, a master puzzler, And him let you print some of his creations for free, if you like to sell them please send royalties to him, the models are on the page https://oskarvandeventer.nl/Print-It-Yourself/ with pictures, instructions and links to his youtube videos of each puzzle.

This is called Twisted Cable, and is an improvement of a traditional one where you can solve by rubbing the parts between the hands, this new version needs you to make two groups and fit together by threading them.

View attachment 534985

View attachment 534986

Looks tasty ngl

 

[impeeza]

Keeping the wave of puzzles from Oskar, I just printed the «HeptaTemple» is a «inverted» puzzle you receive a temple with a prisoner ball inside

Solving it is so easy as lift the cage from the table and the bars can be slide down by twisting them

The big problem is to put the prisoner inside the cage again if you remove all bars and mix them

took me almost 3 hours after print the parts to assemble the prison. there is only a combination of bars and the top of cage have two sides and only one works Oskar is a genius!

They are 10080 permutations and only one works.

 

[emigre]

Condoms and sex toys. No picture because I'll probably break the rules.

 

[slaphappygamer]

I got jury duty.

Post automatically merged: Oct 24, 2025

Condoms and sex toys. No picture because I'll probably break the rules.

Sounds like one hell of a puzzle!

 

[Veho]

Lilo and Stitch figurines.

"Funko Mini Vinyl" is a Funko toy line I had never heard of before, it's not their standard square-headed creepy-eyed fare, they look closest to their blind box minis (which I had never heard of before either) but this is in clear boxes like their pop figures but smaller and a lot less deformed. Saw them in a store for €4 each and snapped them up.

 

[tech3475]

Lilo and Stitch figurines.

View attachment 535281

"Funko Mini Vinyl" is a Funko toy line I had never heard of before, it's not their standard square-headed creepy-eyed fare, they look closest to their blind box minis (which I had never heard of before either) but this is in clear boxes like their pop figures but smaller and a lot less deformed. Saw them in a store for €4 each and snapped them up.

Those ones actually look decent, unlike the regular ones which look like something out of analog horror:

 

[Skv0ra]

Was on sale for $55, my first model kit, just need a good pair of nibbers now. Jehuty and Anubis kits are over $100 each so those will have to wait for another day.




View attachment 534417

View attachment 534416

OMG! But then its Kotobukiya... Tell us how she holds up!

 

[emmanu888]

Lilo and Stitch figurines.

View attachment 535281

"Funko Mini Vinyl" is a Funko toy line I had never heard of before, it's not their standard square-headed creepy-eyed fare, they look closest to their blind box minis (which I had never heard of before either) but this is in clear boxes like their pop figures but smaller and a lot less deformed. Saw them in a store for €4 each and snapped them up.

Oh wow! Now I really want to see the other Disney POP figures getting this treatment.

 

[impeeza]

Creality didn't think so well their new dryer, and the dryer needs to be raised up than the printer, but the filament exits the dryer by the top, my Creality Hi printer is not enclosed so I need a rack shelf to use my new dryer.

So after a visit to Home Center (local home depot) I made this one.

Took only some extra long screws, lots of washers and nuts, three cut boards and a little of patience but its a nice small table.

Expended 30 bucks on materials but is a very cute and sturdy one, and win two shelf for tools and material. Also the materials are enough for two tables.

 

[AncientBoi]

Keeping the wave of puzzles from Oskar, I just printed the «HeptaTemple» is a «inverted» puzzle you receive a temple with a prisoner ball inside
View attachment 535041
View attachment 535036

Solving it is so easy as lift the cage from the table and the bars can be slide down by twisting them


View attachment 535037
The big problem is to put the prisoner inside the cage again if you remove all bars and mix them

View attachment 535039

took me almost 3 hours after print the parts to assemble the prison. there is only a combination of bars and the top of cage have two sides and only one works Oskar is a genius!

They are 10080 permutations and only one works.

Pffffffft, I'll get through that puzzle easy peazy.

 

[Lostbhoy]

Creality didn't think so well their new dryer, and the dryer needs to be raised up than the printer, but the filament exits the dryer by the top, my Creality Hi printer is not enclosed so I need a rack shelf to use my new dryer.

So after a visit to Home Center (local home depot) I made this one.

View attachment 535461 View attachment 535462

Took only some extra long screws, lots of washers and nuts, three cut boards and a little of patience but its a nice small table.

Expended 30 bucks on materials but is a very cute and sturdy one, and win two shelf for tools and material. Also the materials are enough for two tables.

Why not just print one?

 

[AncientBoi]

Just before hospitalization, I bought this to enhance my laptop even MORE . But I'm still too tired at the moment to put it together

For my Dell Precision M4600 Workstation. A HEAVY bitch to carry, yet after researching the info on it, This was one of the goto's in the buisiness world back in it's day.

Mine, only had an Intel core i5.

 

[Hanafuda]

I got stuff today going brotein View attachment 533236

Also got this little charger i like it it's small enough to where I can tie it with my keys so I never loose them. The hidden type c cable is cool also could almost tie other crap around itView attachment 533237

I've always wondered, where do they get all that protein?