Hacking SX Pro Help

[Sir_Winston]

i have been using both SX pro and switch fine, took SD card out to upload some more XCI files but SD card back into switch tried to power on and got a little flash bot nothing coming on, red and ble LEDS on the XS pro

Tried hard resetting switch but no joy, it had been on charge all night as well so deffo got a full charge ?? any ideas

 

[Youkai]

i have been using both SX pro and switch fine, took SD card out to upload some more XCI files but SD card back into switch tried to power on and got a little flash bot nothing coming on, red and ble LEDS on the XS pro

Tried hard resetting switch but no joy, it had been on charge all night as well so deffo got a full charge ?? any ideas

maybe your charger or the usb port is broken ... onl because it was plugged in doesn't mean that you can be 100% sure thst it is full charged

 

[Sir_Winston]

maybe your charger or the usb port is broken ... onl because it was plugged in doesn't mean that you can be 100% sure thst it is full charged

ive left it on charge with another charger suppose ill test when i get home..

 

[nikeymikey]

Do you have autoRCM enabled? If not boot the switch normally and see if it gives you the sd card needs formatting message, I had exactly this and that was the reason. I had to reformat my sd and start agian from a backup.

 

[Sir_Winston]

Do you have autoRCM enabled? If not boot the switch normally and see if it gives you the sd card needs formatting message, I had exactly this and that was the reason. I had to reformat my sd and start agian from a backup.

yes mate i have it enabled im unable to boot my switch with or without the dongle plugged in

 

[nikeymikey]

Have you tried a usb c cable and a pc to boot and send a payload???

 

[DaveLister]

Red light on the dongle is no.juice . Plug it into.pc or phone for 5 secs to charge it's capacitors. It will go green when ready then boot auto rcm or stick it in switch and power cycle.

 

[Sir_Winston]

Red light on the dongle is no.juice . Plug it into.pc or phone for 5 secs to charge it's capacitors. It will go green when ready then boot auto rcm or stick it in switch and power cycle.

No Juice on the dongle??

--------------------- MERGED ---------------------------

Have you tried a usb c cable and a pc to boot and send a payload???

sorry for being thick but how or wehre can i find out how to do that

 

[cyfaws]

He meant that it (the dongle) has not enough power to function.

As for payload and that stuff, check Skullator's YT tutorials, eg.:

for the basics.

With SX Pro you can put the payload stuff (hekate, or what-have-you) and launch it from there, before SX-OS boots.

 

[DaveLister]

No Juice on the dongle??

--------------------- MERGED ---------------------------




sorry for being thick but how or wehre can i find out how to do that

Juice = power = lekky = electricity = energy = DEUCE matha fakka !

Seriously the dongle needs 1-5 secs zap to ensure she can deliver payload.
You can use NXloader on your andriod to deploy the paylod or tegraRCM smash from your pc - using USB c to C cable if on phone and A to C if on pc. download the payload from SX OS site put on phone and use NXloader to deploy it to phone .

--------------------- MERGED ---------------------------

Juice = power = lekky = electricity = energy = DEUCE matha fakka !

Seriously the dongle needs 1-5 secs zap to ensure she can deliver payload.
You can use NXloader on your andriod to deploy the paylod or tegraRCM smash from your pc - using USB c to C cable if on phone and A to C if on pc. download the payload from SX OS site put on phone and use NXloader to deploy it to phone .

You sure you have charged it and if the switch is in autoRCM - it could actually be flat bat - as the SX OS is famous for not powering off unless you do ti from the SX OS dashboard. ( Dont use AutoRCM for that very reason)

--------------------- MERGED ---------------------------

The bitch with AutoRCM is that it wont power off if you use Horizon OS power off options - it turns back on which means its in autoRCM when powered on (USB charge connected) . IT does not charge while in autoRCM ........ you get it now?
If you dongle is defective - as in you know for sure it has been charged (Green light) and still nothing - try using nxloader and SX OS payload thus proves if your SX pro is defective or not .

--------------------- MERGED ---------------------------

Juice = power = lekky = electricity = energy = DEUCE matha fakka !

Seriously the dongle needs 1-5 secs zap to ensure she can deliver payload.
You can use NXloader on your andriod to deploy the paylod or tegraRCM smash from your pc - using USB c to C cable if on phone and A to C if on pc. download the payload from SX OS site put on phone and use NXloader to deploy it to phone .

--------------------- MERGED ---------------------------



You sure you have charged it and if the switch is in autoRCM - it could actually be flat bat - as the SX OS is famous for not powering off unless you do ti from the SX OS dashboard. ( Dont use AutoRCM for that very reason)

--------------------- MERGED ---------------------------

The bitch with AutoRCM is that it wont power off if you use Horizon OS power off options - it turns back on which means its in autoRCM when powered on (USB charge connected) . IT does not charge while in autoRCM ........ you get it now?
If you dongle is defective - as in you know for sure it has been charged (Green light) and still nothing - try using nxloader and SX OS payload thus proves if your SX pro is defective or not .

I stick it into my s8 and that charges it in my case anytime im caught out with flat SX OS pro.