Hardware Switch Usb Port Broken?

[lordfrederiks]

hi all,
I have a problem on a switch :
I don't have any voltage on the fuse close the port when charger plugged in both side.
When i put another battery (charged) it works like a charm.
Nothing on pin 5 of m92t36 with charger.
3v on pin5 and pin6 with new battery .

Is it the usb port ? or something else?

thanks

 

[lordfrederiks]

hi, i change usb port . nothing change.
What i have to do now?

 

[Eitjuhh]

same problem here not charging, can boot it to menu and rcm.

changed usb c port (have good image on TV)
Changed M92T36 (have 5v on pin5 and 3v on pin6)
Changed BQ24193 (No result)
Changed P13USB (no result)

only what i can find, there is capacitor next to m92t36 (right side, if you have the usbport to your side) that gives 0.07V (on working board is this 5-12v) changed that capacitor form working board... also no result)

 

[consolex]

I have a charging problem.
The VBUS is not doing its job.
I think it comes from a rocker on S2_DRV-G1 / S2_DRV-G2 or S1_DRV-G1 / S1_DRV-G2 or S2_DRV_SRC / S2_DRV_SRC

The charging only works in 1 direction

@mattytrog

http://prntscr.com/n8lofo